Same Day Shipping On 99% Of Orders

Allis Chalmers D15 Tractor Parts

About the Allis-Chalmers D15

The D15 replaced the D14 in 1960 and carried the compact D Series design into the 1960s. Early D15 tractors used a four-cylinder engine available in gasoline, LP gas, or diesel versions, with more power and an eight-speed transmission option.

There are two main versions to keep in mind: Series I was built from 1960 through 1962, and Series II from 1963 through 1968. Series II tractors received larger gas and LP engines, a dry air cleaner, headlights moved to the rear fenders, and updated hood decals. These changes are why the model year and serial number should be checked before ordering a D15 part.

Serial Number Reference

Serial number locations: On Series I tractors, the tractor serial number is stamped at the left front end of the torque housing. The gasoline engine serial number is on the rear left-hand side behind the carburetor, and the diesel engine serial number is on the top left-hand side of the engine block. On Series II tractors, the tractor serial number is stamped into the flange where the engine and transmission meet on the left side; gasoline engine numbers are at the rear left-hand side near the carburetor, and diesel numbers are on the top left-hand side of the cylinder block.

The table below shows the beginning tractor serial number for each Model D15 year and series:

 

1960-1962
Model D15 year Beginning serial number
1960 - Series I 1,001
1961 - Series I 1,900
1962 - Series I 6,470
1963-1965
Model D15 year Beginning serial number
1963 - Series II 13,001
1964 - Series II 16,928
1965 - Series II 19,681
1966-1968
Model D15 year Beginning serial number
1966 - Series II 21,375
1967 - Series II 23,734
1968 - Series II 25,127

Total production: 7,169 Model D15 tractors: 6,212 gas/LP and 957 diesel.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Light Ring 4-3/4 inch, black circular light ring with mounting hardware for agricultural equipment.

    Light Ring 4-3/4"

    Allis-Chalmers
    $15.75
    IH-353BD
    Light ring 4-3/4" with black finish.Interchangeable with original.Part Number: IH-353BDFitsAllis-Chalmers B, IB, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45AveryCase VA, VAC, VAH (All up...
    Add to Cart
  • Allis-Chalmers Allis Chalmers D Series Hydraulic Position Control Vinyl Decal, close-up image of the decal with detailed text and markings.

    Allis Chalmers D Series Hydraulic Position Control Vinyl Decal

    Allis-Chalmers
    $11.00
    DJS2496
    Hydraulic position control vinyl decal for listed Allis Chalmers D Series models.Part Number: DJS2496FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Light Terminal, industrial black metal component with mounting screws and a metal bracket for electrical connection.

    Light Terminal

    Allis-Chalmers
    $6.75
    IH-475D
    Light terminal for listed tractor models.Part Number: IH-475DFitsAllis-Chalmers B, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45, WF, RCAveryCase LA, SC, DC, 600, 900, 700, 800, 400, 500,...
    Add to Cart
  • Allis-Chalmers D17 D15 190 Gear Shift Pattern Vinyl, close-up of gear shift pattern diagram showing 6 speeds, reverse and pattern details.

    Allis-Chalmers D17 Series IV, D15 Series II, 190 Gear Shift Vinyl

    Allis-Chalmers
    $12.00
    DJS2259A
    Gear shift pattern vinyl for the listed Allis-Chalmers models.Made in the USA.Part Number: DJS2259AFitsAllis-Chalmers D17 Series IVAllis-Chalmers D15 Series IIAllis-Chalmers 190NotesReference numbers...
    Add to Cart
  • Allis-Chalmers Choke or Fuel Shut Off Cable Clip, metallic hardware part used for engine control cable management.

    Choke or Fuel Shut Off Cable Clip

    Allis-Chalmers
    $6.75
    AB-2426D
    Choke or fuel shut off cable clip for listed Allis-Chalmers, Avery, Case, International, and John Deere applications.Part Number: AB-2426DFitsAC Combines - Industrial: 60 (for choke cable bracket...
    Add to Cart
  • Allis-Chalmers Oil Seal for Allis-Chalmers, Case, Ford, IH, John Deere - close-up view of oil seal with black rubber inner ring and yellow-brown outer ring for machinery lubrication.

    Oil Seal for Allis-Chalmers, Case, Ford, IH, John Deere

    Allis-Chalmers
    $15.75
    AB-1543D
    Oil seal for the listed Allis-Chalmers, Case, Ford, IH/Farmall, and John Deere applications. Verify fitment by model and notes before ordering.Part Number: AB-1543DFitsAllis Chalmers: PTO output...
    Add to Cart
  • Allis-Chalmers Front Crankshaft Seal 74513621, black rubber seal for engine components.

    Front Crankshaft Seal 74513621

    Allis-Chalmers
    $13.50
    IH-1307D
    Front crankshaft seal for applications listed below. Use the fitment and cross-reference details below to verify the correct application. Part Number: IH-1307D Fits Allis Chalmers: WD45, D15, D17 -...
    Add to Cart
  • Allis-Chalmers Front Wheel Bearing Kit, set including bearings and seals for Allis Chalmers D10, D12, D15, D17 models, part number 70247801.

    Front Wheel Bearing Kit Allis Chalmers D10 D12 D15 D17

    Allis-Chalmers
    $63.00
    70247801
    Front wheel bearing kit for select Allis Chalmers models with the listed hub and axle configurations.Part Number: 70247801FitsAllis Chalmers - D10 (High Clearance sn 9001 & up), D10 (H.D. front axle...
    Add to Cart
  • Allis-Chalmers D15 Series II Gas 1963-1968 Vinyl Cut Decal Set, includes various decals and stickers for tractor restoration or customization.

    Allis-Chalmers D15 Series II Gas 1963-1968 Vinyl Cut Decal Set

    Allis-Chalmers
    $129.00
    DJS308
    Allis-Chalmers D15 Series II gas 1963-1968 vinyl cut decal set.USA made.Part Number: DJS308FitsD15 Series II Gas 1963-1968NotesNo refunds on vinyl cut decals.Store in a cool, dry place.Do not soak in...
    Add to Cart
  • Allis-Chalmers Gasket Paper Roll, 98 inches long, flat roll of gasket paper material

    Gasket Paper Roll 98" Long

    Allis-Chalmers
    $18.75
    AB-1844D
    Gasket paper roll for making general purpose gaskets. Not for high temperature applications.Part Number: AB-1844DFitsAllis Chalmers: VariousAvery: VariousCase: VariousCockshutt: VariousFord:...
    Add to Cart
  • Allis-Chalmers Battery Cable 13" (Non-Insulated) AB-405D, a braided metallic battery cable with eyelet connectors on both ends for tractor battery connection.

    Allis-Chalmers Battery Cable 13" Non-Insulated AB-405D

    Allis-Chalmers
    $21.75
    AB-405D
    Battery Cable AB-405DThis 13-inch non-insulated battery cable is a 2-gauge ground cable with straight terminals and 1/2-inch eyelet openings.Keep the important fitment and replacement details below...
    Add to Cart
  • Allis-Chalmers Fuel Filter Bail Assembly with Brass Nut, close-up view of metal fuel filter bail assembly featuring a brass nut for secure fitting.

    Fuel Filter Bail Assembly with Brass Nut

    Allis-Chalmers
    $12.75
    AB-236D
    Fuel Filter Bail Assembly with Brass Nut - AB-236D for the listed tractor models. New part.Part Number: AB-236DFitsAllis Chalmers: 190XT, D21, U, UC, 190 (2.315 Tall Glass Bowl), D15 (Gas (SN: 9001 &...
    Add to Cart
  • Allis-Chalmers OEM Style Choke Rod Knob for Allis Chalmers D10 D12 D14 D15 D17, black round tractor control knob

    OEM Style Choke Rod Knob for Allis Chalmers D10 D12 D14 D15 D17

    Allis-Chalmers
    $6.75
    70228321
    OEM Style Choke Rod Knob for Allis Chalmers D10, D12, D14, D15, and D17. Verify the application notes and thread size before ordering.Part Number: 70228321FitsD10 (as a choke knob)D12 (as choke...
    Add to Cart
  • Allis-Chalmers Seat Shock Absorber Fits Monroe Seat, black automotive shock absorber for seat suspension.

    Seat Shock Absorber Fits Monroe Seat

    Allis-Chalmers
    $48.75
    IH-329D
    The only newly manufactured oil-filled seat shock available. Competing products use air shocks built for automotive suspension, not tractors.Direct-fit rear seat shock absorber for tractors equipped...
    Add to Cart
  • Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47, two metallic gold-colored hole plugs with a smooth and textured surface, one with a snap-in design and the other plain.

    Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47

    Allis-Chalmers
    $1.50
    9563K47
    Nickel-plated 1" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for key ignition switch use.Part Number: 9563K47FitsAllis-Chalmers D Series TractorsSpecsSize: 1 inchNotesKey ignition...
    Add to Cart
  • Allis-Chalmers Ammeter Gauge (30-0-30) - A0NN10670A

    Ammeter Gauge (30-0-30)

    Allis-Chalmers
    $10.00
    A0NN10670A
    Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series l, 190XT Series II, 200, 210, 220, 220FWA, I-40, I-400, I-60, I-600Avery: variousCase: C, CC, D, DC, DI, DO,...
    Add to Cart
  • Allis-Chalmers Nut And Sleeve Kit for 1/4" Steel Hydraulic Line to Traction Booster Gauge, metallic components with threaded ends.

    Nut And Sleeve Kit for 1/4" Steel Hydraulic Line to Traction Booster Gauge

    Allis-Chalmers
    $5.75
    K216-K224
    Nut and sleeve kit for 1/4" steel hydraulic line to the Traction Booster Gauge (AC-124D).Your steel line must be flared using a flaring tool.Part Number: K216-K224FitsAllis Chalmers CAAllis Chalmers...
    Add to Cart