Same Day Shipping On 99% Of Orders

Allis Chalmers G Tractor Parts

About the Allis-Chalmers G

The Allis-Chalmers G was built for small farms, gardens, and vegetable growers, but it looked unlike a conventional tractor. Its Continental four-cylinder engine sat at the rear, leaving the front open for a clear view of mounted tools.

Built in Gadsden, Alabama, from 1948 through 1955, the G was a tool carrier rather than a general-purpose row-crop tractor. Allis-Chalmers offered a line of implements that mounted under the tractor, making the small machine especially useful for cultivating and other close-in work.

Serial Number Reference

Serial number locations: The tractor serial number is stamped next to the starter on the engine. The engine serial number is on the starter side of the engine near the starter.

The table below shows the beginning tractor serial number for each Model G year:

 

1948-1950
Model G year Beginning serial number
1948 6
1949 10,961
1950 23,180
1951-1953
Model G year Beginning serial number
1951 24,006
1952 25,269
1953 26,497
1954-1955
Model G year Beginning serial number
1954 28,036
1955 29,036

Total production: 29,976 Model G tractors.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers G Clutch Rod KI1272, tractor clutch control rod for Allis-Chalmers G series tractors.

    Allis-Chalmers G Clutch Rod KI1272

    Allis-Chalmers
    $28.00
    KI1272
    Clutch rod for Allis-Chalmers G tractors. This replacement rod measures 3/8" OD and 24" long.Part Number: KI1272FitsAllis-Chalmers GSpecsOutside diameter: 3/8"Length: 24"
    Add to Cart
  • Allis-Chalmers Allis Chalmers G Crank Hole Casting

    Allis Chalmers G Crank Hole Casting - AC-058D

    Allis-Chalmers
    $27.95
    AC-058D
    Allis Chalmers G Crank Hole CastingPart Number: AC-058DCrank hole casting for the Allis Chalmers G. New replacement part for tractor repair and restoration.FitsAllis Chalmers GReplaces / Cross...
    Add to Cart
  • Allis-Chalmers 6 Volt Distributor Coil - AB-011D, black cylindrical ignition coil with a mounting clamp and electrical connection terminals.

    6 Volt Distributor Coil AB-011D

    Allis-Chalmers
    $27.75
    AB-011D
    6 Volt Distributor Coil - AB-011DThis 6 volt distributor coil is listed as AB-011D and fits listed tractor applications. It includes multiple cross-reference numbers across several brands.FitsAllis...
    Add to Cart
  • Allis-Chalmers G B C CA IB RC Bottom Oil Cup AC-115D, orange plastic oil cup for vintage tractor models.

    Allis Chalmers G B C CA IB RC Bottom Oil Cup AC-115D

    Allis-Chalmers
    $27.75
    AC-115D
    Allis Chalmers Bottom Oil CupBottom oil cup for Allis Chalmers G, B, C, CA, IB, RC (all with clip mounted cup). Also fits Massey Harris Pony and Pacer.This replacement cup measures 4.495" OD, 4.075"...
    Add to Cart
  • Allis-Chalmers G Bracket for Hand Crank, metal bracket for vintage Allis-Chalmers tractor equipment with a hole for mounting.

    Allis Chalmers G Bracket for Hand Crank

    Allis-Chalmers
    $27.75
    AC-133BD
    Hand crank bracket for Allis Chalmers G tractors. Listed as a replacement for original part numbers 800068 and 70800068.Part Number: AC-133BDFitsAllis Chalmers GReplaces / Cross...
    Add to Cart
  • Allis-Chalmers G Brake Rod Return Spring, black coil spring with hooks on each end for brake mechanism.

    Allis-Chalmers G Brake Rod Return Spring | 800013 / 70800013

    Allis-Chalmers
    $27.75
    AC-300D
    Brake rod return spring for Allis-Chalmers G tractors. Sold individually with a 9-9/16" overall length. Two are used per tractor.Part Number: AC-300DFitsAllis-Chalmers GReplaces / Cross...
    Add to Cart
  • Allis-Chalmers G Manifold Stud Set with Brass Nuts, black threaded studs and gold-colored brass nuts arranged on a white background.

    Allis Chalmers G Manifold Stud Set with Brass Nuts

    Allis-Chalmers
    $27.25
    G001
    Part Number: G001Allis Chalmers G Manifold Stud Set with Brass NutsStud set for Allis Chalmers G tractors.FitsAllis Chalmers GSpecs4 pcs = 5/16-18 x 1-1/2 manifold studs4 pcs = 5/16-18 brass nuts
    Add to Cart
  • Allis-Chalmers Allis Chalmers Upper Steering Shaft Tube Bushing B C CA IB G

    Allis Chalmers Upper Steering Shaft Tube Bushing

    Allis-Chalmers
    $26.75
    AC-339D
    Allis Chalmers upper steering shaft tube bushing for B, C, CA, IB, and G with Ross steering box.For original tube fitment, sand approximately .005 off the outside diameter of the bushing.Part Number:...
    Add to Cart
  • Allis-Chalmers Water Temperature Gauge, industrial water temperature meter with 130-280 degree range, with metal mounting and coiled sensor cable.

    Allis-Chalmers Water Temperature Gauge 130-280 Degree Range

    Allis-Chalmers
    $26.75
    UTG25
    Part Number: UTG25OverviewWater temperature gauge with a 130-280 degree range. Dash mount design with block fitting and chrome bezel included.Specs130-280 degree rangeDash mountIncludes block...
    Add to Cart
  • Allis-Chalmers Gasket Paper Roll 108 Inches Long, plain brown gasket paper roll for industrial sealing applications.

    Gasket Paper Roll 108" Long

    Allis-Chalmers
    $26.75
    AB-1846D
    Gasket paper roll for making general purpose gaskets. Not for high temperature applications.Part Number: AB-1846DFitsAllis Chalmers: VariousAvery: VariousCase: VariousCockshutt: VariousFord:...
    Add to Cart
  • Allis-Chalmers Magneto PUSH-PULL Ignition Switch Allis Chalmers OEM

    Magneto PUSH-PULL Ignition Switch for Allis Chalmers

    Allis-Chalmers
    $26.75
    AB-489D
    Magneto PUSH-PULL Ignition Switch for Allis Chalmers and other listed applications. This switch has 1 screw type terminal and a threaded stem measuring 3/8 - 32 UNEF.Part Number: AB-489DFitsAllis...
    Add to Cart
  • Allis-Chalmers Marvel Schebler Carburetor Float for Allis-Chalmers G, Massey Harris Pony, a gold-colored metal float with visible mounting screws and metal seams.

    Marvel Schebler Carburetor Float for Allis-Chalmers G, Massey Harris Pony

    Allis-Chalmers
    $26.75
    AC-075D
    Marvel Schebler carburetor float for Allis-Chalmers G and Massey Harris Pony.Fits listed Marvel Schebler carbs. Can be used on power units when equipped with one of these carburetor numbers; verify...
    Add to Cart
  • Allis-Chalmers BRAKE SHOE LINING SET | Allis Chalmers G D10 D12 D14 D15

    Allis-Chalmers Brake Shoe Lining Set G D10 D12 D14 D15 ACR3538

    Allis-Chalmers
    $25.75
    ACR3538
    Allis-Chalmers Brake Shoe Lining SetFor Allis-Chalmers G, D10, D12, D14, and D15 up to SN 9000. Includes 2 linings with rivets for 1 wheel only.FitsAllis-Chalmers G up to SN 9000Allis-Chalmers D10 up...
    Add to Cart
  • Allis-Chalmers Cap used as radiator cap or fuel cap Allis Chalmers 70207244

    Allis-Chalmers Cap, Radiator or Fuel Cap 70207244

    Allis-Chalmers
    $25.75
    AC-172D
    Allis-Chalmers cap used as either a radiator cap or fuel cap, part number 70207244. OE style and appearance for original equipment applications.Important: This cap is for the original radiator only...
    Add to Cart
  • Allis-Chalmers Delco Distributor Shaft Bushing & Shim Kit

    Delco Distributor Shaft Bushing & Shim Kit for Allis-Chalmers, Avery, Case, Cockshutt, Oliver, John Deere

    Allis-Chalmers
    $25.75
    AB-3007D
    Delco distributor shaft bushing & shim kit for the listed Allis-Chalmers and other equipment applications.Use the included bushing and shims for the applications shown below. The bushing needs to be...
    Add to Cart
  • Allis-Chalmers Economy Carburetor Repair Kit Marvel Schebler Allis Chalmers G TSV13, set of replacement gaskets, seals, spring, screws, and parts for carburetor repair.

    Economy Carburetor Repair Kit Marvel Schebler Allis Chalmers G

    Allis-Chalmers
    $25.75
    AC-051D
    Economy carburetor repair kit for listed Marvel Schebler carburetors.Kit contains: bowl gasket, 2 O-rings, needle valve and seat, float shaft, idle adjustment screw, packings and retainers.Part...
    Add to Cart
  • Allis-Chalmers Universal Top Adjusting Bracket for Alternator or Generator, metal component with mounting holes and adjustable slot.

    Universal Top Adjusting Bracket for Alternator or Generator

    Allis-Chalmers
    $25.75
    AB-529D
    Universal top adjusting bracket for an alternator or generator. It may have to be modified to fit your specific application.Part Number: AB-529DFitsAllis ChalmersAveryCaseCockshuttFordIH /...
    Add to Cart