Same Day Shipping On 99% Of Orders

Allis Chalmers IB Tractor Parts

About the Allis-Chalmers IB

The IB was Allis-Chalmers' industrial version of the Model B. It kept the compact four-cylinder layout but added a heavier frame and front axle, along with a foot throttle for industrial work.

IB tractors built before 1946 shared the serial-number sequence used by the farm Model B. From 1946 onward, the IB used its own IB-prefixed serial numbers, and the model continued into the 1950s.

Serial Number Reference

Serial number locations: The tractor serial number is stamped behind the gear shift lever on top of the transmission case. The engine serial number is on the rear left-hand side of the engine between the carburetor and fuel filter.

The table below shows the beginning tractor serial number for each Model IB year:

 

1938-1943
Model IB year Beginning serial number
1938 - Shared with Model B 97
1939 - Shared with Model B 11,800
1940 - Shared with Model B 33,502
1941 - Shared with Model B 49,721
1942 - Shared with Model B 56,782
1943 - Shared with Model B 64,501
1944-1948
Model IB year Beginning serial number
1944 - Shared with Model B 65,502
1945 - Shared with Model B 70,210
1946 - IB serial prefix IB1001
1947 - IB serial prefix IB1003
1948 - IB serial prefix IB1010
1949-1953
Model IB year Beginning serial number
1949 - IB serial prefix IB1282
1950 - IB serial prefix IB1556
1951 - IB serial prefix IB1879
1952 - IB serial prefix IB2219
1953 - IB serial prefix IB2570

Total production: 2,850 Model IB tractors.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Sediment Bowl Gasket 2"

    Sediment Bowl Gasket 2"

    Allis-Chalmers
    $2.25
    AB-039D
    Sediment Bowl Gasket 2" for the listed tractor models. Part Number: AB-039D Fits Allis Chalmers: B, C, CA, G, D10, D12, D14, D15 (Gas To Sn# 9000), D17 (Gas To Sn# 42000), I40, I400, I60, I600, 170,...
  • Allis-Chalmers Main Nozzle for Marvel Schebler Carburetor, metallic precision-engineered fuel nozzle component.

    Main Nozzle for Marvel Schebler Carburetor

    Allis-Chalmers
    $24.75
    AB-1156D
    Main nozzle for Marvel Schebler carburetor with fitment listed for Allis Chalmers, Ford, and IH / Farmall applications.Part Number: AB-1156DFitsAllis Chalmers: B, IB, C, RCFord: NAA, 600, 700IH /...
  • Allis-Chalmers Throttle Butterfly Disc for Marvel Schebler Carburetor, metal circular disc with two holes for installation.

    Throttle Butterfly Disc for Marvel Schebler Carburetor

    Allis-Chalmers
    $6.00
    AB-1159D
    Throttle butterfly disc for Marvel Schebler carburetor. Aluminum disc measuring 1.105" outside diameter.Fits the listed Allis Chalmers, Ford, International, John Deere, and Minneapolis Moline...
  • Allis-Chalmers Starter Switch Allis Chalmers B C CA G IB RC WC WD WD45 WF

    Starter Switch for Allis-Chalmers B C CA G IB RC WC WD WD45 WF

    Allis-Chalmers
    $12.75
    AB-012D
    Part Number: AB-012DStarter Switch for Allis-Chalmers B C CA G IB RC WC WD WD45 WFManual foot / lever starter switch with saddle mount. Does not fit Autolite starter applications.FitsAllis-Chalmers:...
  • Allis-Chalmers Governor Rod Linkage Spring B IB C CA D10 D12 D14 D15 RC, mechanical spring with loops at both ends for engine governor linkage adjustment.

    Allis Chalmers Governor Rod Linkage Spring B IB C CA D10 D12 D14 D15 RC

    Allis-Chalmers
    $11.75
    AC-304D
    Governor rod linkage spring for Allis Chalmers tractors and equipment. For distributor or magneto ignition.Part Number: AC-304DFitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers...
  • Allis-Chalmers G Choke Rod, AC-344D, 70800118, a metallic rod with a loop at one end for engine control.

    Allis-Chalmers G Choke Rod | AC-344D | 70800118

    Allis-Chalmers
    $24.75
    AC-344D
    Part Number: AC-344DAllis-Chalmers G Choke RodNew choke rod for Allis-Chalmers G tractors. USA made and identified as AC-344D.FitsAllis-Chalmers GReplaces / Cross Reference800118NotesUSA madePRIMER
  • Allis-Chalmers Universal Choke Cable 72"

    Universal Choke Cable 72"

    Allis-Chalmers
    $14.75
    AB-423D
    Universal choke cable with a 72" metal sheathed length.Cut to length. Can also be used as a stop cable for diesel engines. Various tractors, forklifts, and other applications using 72" or less cable...
  • Allis-Chalmers Metal Sheathed Choke Cable 47"

    Metal Sheathed Choke Cable 47"

    Allis-Chalmers
    $22.75
    JD-718D
    Metal sheathed choke cable with a 47" length and plastic knob.Cut to length. Thread length where it goes through the dash is 3/8".Part Number: JD-718DFitsAllis Chalmers - various modelsAvery -...
  • Aftermarket Top Link, industrial mechanical linkage component for heavy machinery or agricultural equipment, shown with a rod and mounting eye

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT...
  • Aftermarket 3 PT Lynch Pin, metallic pin with a circular ring for securing attachments in farming equipment.

    3 PT Lynch Pin

    Aftermarket
    $2.00
    MI-119D
    3 PT Lynch Pin for 3-point equipped tractors and implements using 7/16" diameter pins.Part Number: MI-119DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey...
  • Allis-Chalmers Universal Oil Pressure Gauge (0-30 LB) - AB-004D

    Universal Oil Pressure Gauge 0-30 LB

    Allis-Chalmers
    $21.75
    AB-004D
    Universal oil pressure gauge with a 0-30 LB range for the applications listed below. Includes verified Allis-Chalmers and John Deere fitment and replacement numbers.Part Number: AB-004DFitsAllis...
  • Allis-Chalmers Oil Pressure Gauge Copper Line Kit

    Oil Pressure Gauge Copper Line Kit

    Allis-Chalmers
    $29.75
    AB-523D
    Oil pressure gauge copper line kit for the applications listed below. Includes 6 FT of 1/8" copper line and the fittings listed in the kit contents.Part Number: AB-523DFitsAllis...
  • Allis-Chalmers Temperature Gauge Red Needle, circular water temperature gauge with temperature markings from 120 to 220 degrees Fahrenheit, green, white, and red color zones indicating safe, warning, and freezing temperatures.

    Allis-Chalmers Temperature Gauge Red Needle

    Allis-Chalmers
    $32.75
    AC-064D
    Part Number: AC-064DAllis-Chalmers Temperature GaugeThis water temperature gauge has a white face, red needle, and the Allis-Chalmers name. It screws into the radiator neck and is like original...
  • Allis-Chalmers AMMETER (AMP) GAUGE, 60-0-60 - AB-466D

    AMMETER (AMP) GAUGE, 60-0-60

    Allis-Chalmers
    $19.75
    AB-466D
    Ammeter (amp) gauge with a 60-0-60 range, chrome bezel, and no logo.Fits most tractors equipped with an alternator and a 2" diameter hole.Part Number: AB-466DFitsAllis ChalmersAveryCaseCockshuttFord
  • Allis-Chalmers Allis Chalmers Oil Pressure Gauge B IB C CA G RC WC WF WD WD45

    Allis Chalmers Oil Pressure Gauge

    Allis-Chalmers
    $32.75
    AC-159D
    Allis Chalmers oil pressure gauge for the listed models and applications.Features a 0 - 30 PSI range, chrome bezel, and engine mounted design.Part Number: AC-159DFitsAllis Chalmers: B, IB, C, CA, G,...
  • Aftermarket In-Line Fuel Filter AB-490D

    In-Line Fuel Filter for Various Models

    Aftermarket
    $12.95
    AB-490D
    In-line fuel filter for various models using 3/8" fuel lines. Includes hose and clamps.Use to help keep rust and dirt out of the carburetor.Part Number: AB-490DFitsAllis...
  • Allis-Chalmers Universal Ammeter (Amp) Gauge (20-0-20)

    Universal Ammeter Gauge (20-0-20)

    Allis-Chalmers
    $19.75
    AB-016D
    Universal ammeter gauge with a 20-0-20 range and chrome bezel.Compatible with Allis-Chalmers, Case, Cockshutt, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver...
  • Allis-Chalmers Brass Sediment Bowl Screen, metallic brass disc with a fine mesh pattern for filtering sediment.

    Brass Sediment Bowl Screen

    Allis-Chalmers
    $3.75
    AB-229D
    Brass sediment bowl screen for listed tractors and combines.Part Number: AB-229DFitsAllis Chalmers - 190XT, B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, I40, I400, I60, I600, IB, RC, U, UC, WC,...