Same Day Shipping On 99% Of Orders

Allis Chalmers WD Tractor Parts

About the Allis-Chalmers WD

The WD brought Allis-Chalmers' two-clutch Power Control system to the row-crop tractor market when it was introduced in 1948. The foot clutch handled the main drive, while the hand-operated wet clutch let the PTO keep turning when the tractor slowed or stopped.

Built through 1953, the WD also introduced power-shifted rear wheels and used a four-speed transmission. The WD was followed by the higher-powered WD45.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left brake cover or the left rear of the axle housing. The engine serial number is on the left-hand side of the engine near the carburetor.

The table below shows the beginning tractor serial number for each Model WD year:

 

1948-1949
Model WD year Beginning serial number
1948 7
1949 9,250
1950-1951
Model WD year Beginning serial number
1950 35,445
1951 72,328
1952-1953
Model WD year Beginning serial number
1952 105,182
1953 131,243

Total production: 146,125 Model WD tractors.

Allis-Chalmers WD Paint Reference

For restoration planning, the Allis-Chalmers WD is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers WD paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • A gasket for the governor front cover of Allis-Chalmers farm tractors, specifically for models WC, WD, WD45, and D17. The gasket is gray, with four holes for bolts and a large opening to fit around the governor.

    Governor Front Cover Gasket for Allis-Chalmers WC WD WD45 D17

    Allis-Chalmers
    $8.25
    70233215
    Governor Front Cover Gasket for select Allis-Chalmers tractors.Part Number: 70233215FitsAllis Chalmers - WC, WD, WD45, WD45 Diesel, D17 (Gas & LP)Replaces / Cross...
  • Allis-Chalmers Allis Chalmers WD45 WD WC D17 Manifold 70224782 70229416 70226350

    Allis Chalmers WD WC WD45 D17 Manifold

    Allis-Chalmers
    $199.75
    AC-004D
    Replacement manifold for Allis-Chalmers WC, WD, WD45, and D17 gas models up to SN 32000.Preserves the original design and appearance noted in the product data.Part Number: AC-004DFitsAllis Chalmers...
  • Brass Allis-Chalmers carburetor fuel bowl or LP regulator drain cock, part number 70915514, with a threaded body, hex nut, and flat metal wing handle.

    Carburetor Fuel Bowl Drain Cock, LP Regulator Drain Cock for Allis-Chalmers 70915514

    Allis-Chalmers
    $7.75
    70915514
    Carburetor fuel bowl drain cock and LP regulator drain cock for listed Allis-Chalmers models. Includes 1/8" NPT and replacement 70915514.Part Number: 70915514FitsAllis Chalmers WC (Zenith & Marvel...
  • Allis-Chalmers Spark Plug Wiring Set with 90 Degree Boots - FD-149D, black spark plug wires with 90 degree boots, includes four wire connectors and six brass terminals.

    Spark Plug Wiring Set w/90 Degree Boots - FD-149D

    Allis-Chalmers
    $18.00
    FD-149D
    Spark plug wiring set with 90 degree boots. Cut-to-length wires with copper core construction, aluminum coating for corrosion resistance, and waterproof neoprene boots. This set is listed for many...
  • Allis-Chalmers Economy Carburetor Repair Kit for Marvel Schebler Allis-Chalmers, assortment of gaskets, screws, and small parts for carburetor maintenance.

    Economy Carburetor Repair Kit for Marvel Schebler Allis-Chalmers

    Allis-Chalmers
    $24.75
    AB-220D
    Economy carburetor repair kit for Marvel Schebler carbs. Fits the listed Marvel Schebler carburetor manufacturer numbers and includes the parts needed for a carburetor repair.Part Number:...
  • A set of small bowl Marvel Schebler carburetor gaskets and o-rings for Allis-Chalmers farm tractors, including a large flexible gasket, a smaller gasket, and three small o-rings of different sizes.

    Carburetor Gasket Kit - Small Bowl Marvel Schebler

    Allis-Chalmers
    $6.75
    AB-3233D
    Carburetor Gasket Kit - Small Bowl Marvel ScheblerNew gasket kit with broad tractor application coverage and multiple listed replacement numbers.Part Number: AB-3233DFitsAllis Chalmers: B, C, CA,...
  • Rectangular brown cork pushrod side cover gasket with rounded inner corners and six bolt holes, for Allis-Chalmers WC, WD, and WF farm tractors.

    Allis Chalmers WC WD WF Pushrod Side Cover Gasket

    Allis-Chalmers
    $12.75
    AC-2055D
    Pushrod side cover gasket for select Allis Chalmers equipment. Fits WC, WD, and WF tractors, plus listed power unit and motor grader applications.Part Number: AC-2055DFitsAllis Chalmers WCAllis...
  • A brass fuel line compression fitting designed for Allis-Chalmers farm tractors. It connects a 5/16 inch fuel line to a 1/8 inch pipe, suitable for various model tractors.

    Fuel Line Compression Fitting 5/16" Line to 1/8" Pipe - Various Models

    Allis-Chalmers
    $3.75
    516FITTING
    Fuel line compression fitting for various Allis-Chalmers models. Connects 5/16" line to 1/8" pipe and is used on sediment bowls in most applications.Part Number: 516FITTINGFitsAllis Chalmers -...
  • A sediment bowl filter for Allis-Chalmers farm tractors, featuring a tall bowl assembly with a filter element inside. The filter has a metal body, a glass bowl for sediment collection, and a brass shut-off valve at the side. The image notes that the product is for illustrative purposes and the sediment bowl assembly is not included.

    Sediment Bowl Filter for Tall Bowl Assemblies

    Aftermarket
    $12.25
    DJS3039
    Fuel filter only. Sediment bowl not included. This fits our sediment bowl assembly ACR2406 and also fits replacement glass bowl
  • Two blue water pump gaskets for Allis-Chalmers WC, WD, WD45, and WF farm tractors: a large circular gasket with a wide center opening and several bolt holes, and a smaller triangular gasket with an oval opening and three bolt holes, shown on a white background.

    Water Pump Gasket Set for Allis Chalmers WC, WD, WD45, WF

    Allis-Chalmers
    $6.75
    70203061
    Water pump gasket set for Allis Chalmers tractors. Kit contains 2 water pump gaskets.Part Number: 70203061FitsAllis Chalmers WCAllis Chalmers WDAllis Chalmers WD45Allis Chalmers WFAllis Chalmers...
  • Silver cast-metal thermostat housing cover for Allis-Chalmers WC, WD, and WF farm tractors, with a raised round neck and three mounting tabs with bolt holes.

    Allis Chalmers WC WD WF Thermostat Housing Cover

    Allis-Chalmers
    $69.75
    AC-1219D
    Thermostat Housing Cover for Allis Chalmers WC, WD, and WF tractors.Replaces 70231441 and 70262805.If you need the gasket, order AC-1571D.Part Number: AC-1219DFitsWCWDWFReplaces / Cross...
  • Two curved metal connecting rod bearing shells for Allis-Chalmers farm tractors, shown separately against a white background.

    Connecting Rod Bearing .010 Undersize for Allis-Chalmers D17, WD, WD45, 170, 175, WC, WF

    Allis-Chalmers
    $15.75
    AC-2493D
    Connecting rod bearing .010 undersize for the Allis-Chalmers applications listed below. Sold per journal.Part Number: AC-2493DFitsAllis Chalmers D17, WD, WD45, 170, 175 (Gas, LP with G201, G226...
  • Allis-Chalmers Lights Knob, only for Allis Chalmers tractors, black plastic knob with 'LIGHTS' text in white.

    Lights Knob Only for Allis Chalmers

    Allis-Chalmers
    $5.75
    AB-425D
    Part Number: AB-425DLights Knob OnlyKnob Only ("Lights") for listed applications. Thread size is 10-32.FitsAllis Chalmers: B, C, CA, G, WC, WD, WD45Case: VAC, VAH, VAI, VAO (all up to sn...
  • Allis-Chalmers Air Cleaner Cap 70208222, black round tractor air filter cap with a smooth surface.

    Allis-Chalmers Air Cleaner Cap 70208222

    Allis-Chalmers
    $21.75
    ACR0576
    Part Number: ACR0576 Allis-Chalmers Air Cleaner Cap Replacement air cleaner cap for Allis-Chalmers WC, WD, WF, WD45, and D15 tractors. Part number 70208222. New replacement part. Specs: I.D. 1-3/4",...
  • Two gray semicircular Allis-Chalmers connecting rod bearing shells, .020-inch undersize, shown on a white background for D17, WD, WD45, 170, 175, WC, and WF farm tractors.

    Connecting Rod Bearing .020 Undersize for Allis-Chalmers D17, WD, WD45, 170, 175, WC, WF

    Allis-Chalmers
    $15.00
    AC-2562D
    Connecting rod bearing .020" undersize for the Allis-Chalmers applications listed below. Sold per journal.Part Number: AC-2562DFitsAllis Chalmers D17, WD, WD45, 170, 175 (gas, LP with G201, G226...
  • Allis-Chalmers Ignition Switch 4 Position Key Switch

    4 Position Ignition Switch with 2 Keys

    Allis-Chalmers
    $19.75
    AB-400D
    4-position ignition switch for AG and light industrial equipment.Includes 2 keys.Part Number: AB-400DFitsAllis ChalmersAveryCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonMassey...
  • Allis-Chalmers Allis Chalmers Throttle Quadrant, Governor Control BUSHING 70222447

    Allis Chalmers Steering Shaft Bushing Governor Control Bushing

    Allis-Chalmers
    $19.75
    AC-225D
    Allis Chalmers steering shaft bushing / governor control bushing.Used as lower steering shaft support bushing on D19.Part Number: AC-225DFitsAllis Chalmers D14Allis Chalmers D15Allis Chalmers D17...
  • Allis-Chalmers Belt Allis Chalmers WF WD WD45 WC 70209824

    Allis-Chalmers Belt 70209824

    Allis-Chalmers
    $15.75
    AB-010D
    Replacement belt with listed applications across multiple equipment brands. Size is 5/8" wide x 46-1/2" long.Part Number: AB-010DFitsAllis Chalmers: WF, WD, WD45 Gas, WC (as a fan belt), 840B with 30...