Same Day Shipping On 99% Of Orders

Allis Chalmers WD45 Tractor Parts

About the Allis-Chalmers WD45

The WD45 replaced the WD in 1953 and gave Allis-Chalmers a stronger four-plow row-crop tractor without losing the WD's live PTO and Snap-Coupler layout. Its 226-cubic-inch gas, tractor-fuel, or LP engine made it noticeably more powerful than the WD.

The WD45 was the first Allis-Chalmers tractor offered with power steering, which became available in 1956. A six-cylinder diesel was added after Allis-Chalmers acquired Buda, and the WD45 remained in production through 1957.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left brake cover or the left rear of the axle housing. The gasoline engine serial number is on the left-hand side of the engine near the carburetor; diesel engine numbers are on the left-hand side of the diesel engine.

The table below shows the beginning tractor serial number for each Model WD45 year:

 

1953-1954
Model WD45 year Beginning serial number
1953 146,607
1954 160,386
1955-1956
Model WD45 year Beginning serial number
1955 190,993
1956 217,992
1957-1957
Model WD45 year Beginning serial number
1957 230,295

Total production: 90,382 Model WD45 tractors (83,536 gasoline and 6,509 diesel; the LP/tractor-fuel total is unknown).

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Dip Stick Gage Bushing - Allis Chalmers CA B C WC WF WD WD45 D10 D12 D14 D15 D17 D19

    Dip Stick Gage Bushing - Allis-Chalmers CA B C WC WF WD WD45 D10 D12 D14 D15 D17 D19

    Allis-Chalmers
    $28.75
    70211825
    Dip Stick Gage Bushing for listed Allis-Chalmers and AC Miscellaneous models.Part Number: 70211825FitsAllis Chalmers - CA, B, IB, C, WC, WF, WD, WD45, D10, D12, D14, D15, D17, D19AC Miscellaneous -...
    Add to Cart
  • Allis-Chalmers CRANKSHAFT PULLEY Allis Chalmers WD WD45 | 70227395

    Crankshaft Pulley for Allis Chalmers WD WD45

    Allis-Chalmers
    $195.00
    AC-069D
    Part Number: AC-069DAllis Chalmers Crankshaft PulleyFor Allis Chalmers WD and WD45 models, with or without power steering.FitsAllis Chalmers WDAllis Chalmers WD45With and without power...
    Add to Cart
  • Allis-Chalmers Heavy Duty Clutch Kit for Allis Chalmers WC, WD, WD45, WF, includes clutch pressure plate, clutch disc, release bearing, and clutch spline.

    Heavy Duty Clutch Kit for Allis Chalmers WC, WD, WD45, WF

    Allis-Chalmers
    $499.75
    AC-2978D
    Heavy duty clutch kit for select Allis Chalmers tractors when a heavy duty pressure plate is required. Includes a new pressure plate, new clutch disc, throw-out bearing, and pilot bearing.Part...
    Add to Cart
  • Allis-Chalmers Front Wheel Hub Cap for Allis-Chalmers WD45, WD, D14, D15, D17, close-up view of a metallic wheel hub cap with a hexagonal center and smooth finish.

    Front Wheel Hub Cap for Allis-Chalmers WD45, WD, D14, D15, D17

    Allis-Chalmers
    $29.75
    AC-5389D
    Front Wheel Hub Cap for Allis-Chalmers WD, WD45, D14, D15, and D17.Threaded front wheel hub cap with the listed measurements below.Part Number: AC-5389DFitsAllis Chalmers WDAllis Chalmers WD45Allis...
    Add to Cart
  • Allis-Chalmers Universal 12V LED Fender & Cab Warning Light, Amber / Red

    Universal 12V LED Fender & Cab Warning Light Amber / Red

    Allis-Chalmers
    $59.75
    AB-3538D
    Universal 12V LED fender and cab warning light with amber and red diodes.Includes mounting stud with nut and washers.Part Number: AB-3538DFitsAllis-Chalmers - various modelsCase - various...
    Add to Cart
  • Allis-Chalmers Allis Chalmers 5 Blade Fan D17 D19 WC WD45 WF 170 175 | 70240973

    Allis Chalmers 5 Blade Fan

    Allis-Chalmers
    $98.50
    70240973
    Allis Chalmers 5 blade fan for listed gas and diesel models.Part Number: 70240973FitsAllis Chalmers D17 (Gas & Dsl)Allis Chalmers D19 (Gas & Dsl)Allis Chalmers WCAllis Chalmers WD45 (Gas & Dsl)Allis...
    Add to Cart
  • Allis-Chalmers Oil Pan Gasket WD45 Diesel D17 Diesel D19 Diesel, black rubber gasket strips for engine oil pan sealing.

    Allis Chalmers Oil Pan Gasket WD45 Diesel D17 Diesel D19 Diesel

    Allis-Chalmers
    $14.75
    74501199
    Oil pan gasket for the listed Allis Chalmers diesel applications.Part Number: 74501199FitsAllis Chalmers WD45 Diesel with D230 engineAllis Chalmers D17 Diesel with D262 engineAllis Chalmers D19...
    Add to Cart
  • Allis-Chalmers 4.5" x 16" 6 Lug Front Wheel with 4 Wheel Weight Holes, white, circular steel tractor wheel with bolt holes

    4.5" x 16" 6 Lug Front Wheel with 4 Wheel Weight Holes

    Allis-Chalmers
    $99.75
    WH-022D
    4.5" x 16" 6 Lug Front Wheel with 4 Wheel Weight HolesFor select tractors using a 4 1/2" x 16" 6 lug rim.Part Number: WH-022DFitsAllis Chalmers: ED40, D19, D17 (SN: 75001 and up, 6 Lug), D15 (SN:...
    Add to Cart
  • Allis-Chalmers Washer, Needle & Seat Main Adjustment Allis Chalmers | 70226466

    Washer, Needle & Seat Main Adjustment for Allis-Chalmers

    Allis-Chalmers
    $7.25
    70226466
    Washer for Needle & Seat Main Adjustment for select Allis-Chalmers equipment.Includes 1 washer.Part Number: 70226466FitsAllis Chalmers - WD, WD45, D15, D17, 170, 175AC Combine - EReplaces / Cross...
    Add to Cart
  • Allis-Chalmers Allis Chalmers WD WD45 WC Step

    Allis-Chalmers WD WD45 WC Step

    Allis-Chalmers
    $148.75
    KI1122
    Part Number: KI1122Allis-Chalmers WD WD45 WC StepStep for WD, WD45, and Styled WC tractors. Made in the USA with a primered finish.FitsAllis Chalmers - WD, WD45, Styled WCNotesMounts in the existing...
    Add to Cart
  • Allis-Chalmers Cork / Rubber Rollpack Gasket Material, cylindrical rolled gasket with cork and rubber composition for industrial sealing applications.

    Cork / Rubber Rollpack Gasket Material

    Allis-Chalmers
    $14.00
    AB-1830D
    Cork / Rubber Rollpack Gasket Material for making multi-purpose gaskets. USA made and sold as a 12" x 24" sheet.Part Number: AB-1830DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn...
    Add to Cart
  • Allis-Chalmers Pre-cleaner Cap Assembly - AB-470D, black and transparent pre-cleaner cap for industrial equipment, with mounting base and adjustable clamp.

    Pre-cleaner Cap Assembly AB-470D

    Allis-Chalmers
    $45.95
    AB-470D
    Product OverviewPre-cleaner cap assembly AB-470D for selected tractors and equipment. Only models with 3" ID base and 7" bowl are listed.Note: Replacement numbers are listed below for reference...
    Add to Cart
  • Allis-Chalmers REAR SPINOUT (Power Shift) RIM 13 X 28 - WH-008D

    Allis-Chalmers Rear Spinout Rim 13 x 28

    Allis-Chalmers
    $749.75
    WH-008D
    Rear spinout (Power Shift) wheel rim, 13 x 28. 4 rails with stop adjustment holes drilled 90 degrees perpendicular to the side of the rim, not 90 degrees to the rail. USA made.To determine rim width,...
    Add to Cart
  • Allis-Chalmers Economy Char-lynn Steering Coupler, metal steering coupler with U-joint for tractor steering systems.

    Economy Char-Lynn Steering Coupler AB-497D

    Allis-Chalmers
    $19.75
    AB-497D
    Economy Char-Lynn Steering CouplerThis economy coupler is for tractors with a U-joint at one end of the existing steering shaft.DJS part number: IH-555DFitsAllis Chalmers - variousCase -...
    Add to Cart
  • Allis-Chalmers Pre Cleaner Cap Assembly AB-383D, black and transparent plastic pre cleaner cap with mounting features for agricultural machinery.

    Pre Cleaner Cap Assembly AB-383D

    Allis-Chalmers
    $85.50
    AB-383D
    Pre Cleaner Cap Assembly AB-383DPre cleaner cap assembly for tractors with a 2-1/4" ID base. See listed fitment and replacement numbers below.FitsAllis Chalmers: variousCase: 450 Dsl, 530 Dsl, 570...
    Add to Cart
  • Allis-Chalmers WD WD45 Delco Starter 79004847, industrial tractor starter motor with mounting bracket and gear

    Allis Chalmers WD WD45 Delco Starter 79004847

    Allis-Chalmers
    $399.00
    79004847
    Part Number: 79004847Delco StarterRefurbished Delco starter for Allis Chalmers WD and WD45 Gas models. 6 volt, 10 teeth, CCW.FitsAllis Chalmers WD GasAllis Chalmers WD45 GasReplaces / Cross...
    Add to Cart
  • Allis-Chalmers RAINCAP 2-1/2 in OD Zinc-Plated, metal rain cap for industrial or agricultural applications.

    RAINCAP 2-1/2 in OD Zinc-Plated

    Allis-Chalmers
    $34.50
    RC-014D
    RAINCAP with 2-1/2" OD zinc-plated construction.Fits straight chrome pipe applications.Part Number: RC-014DFitsAllis ChalmersFordIH / FarmallJohn DeereStraight chrome pipeSpecs2-1/2" ODZinc-plated
    Add to Cart
  • Allis-Chalmers Raincap 3-1/2" O.D. for Allis-Chalmers machinery, metal rain cap with durable construction.

    Raincap 3-1/2" O.D. for Allis-Chalmers and More

    Allis-Chalmers
    $47.75
    RC-016D
    Raincap with a 3-1/2" O.D. and zinc plated finish.Fits the listed tractor applications below.Part Number: RC-016DFitsAllis Chalmers: WC, WD, WD45, D17 GAS (EXCEPT SERIES IV) - FITS STRAIGHT CHROME...
    Add to Cart