Same Day Shipping On 99% Of Orders

Allis Chalmers D12 Tractor Parts

Allis-Chalmers D12 Tractor Parts

About the Allis-Chalmers D12

Allis-Chalmers introduced the D12 in 1959 as part of the new D Series. It was a compact row-crop tractor with a four-cylinder gasoline engine, four-speed transmission, live hydraulics, and a 540-rpm PTO. A D12 High Clearance version was also offered for cultivation work where extra clearance mattered.

The D12 stayed in production through 1968 and went through Series I, Series II, and Series III updates during that run. Early and later tractors can therefore differ in engine parts, air-cleaner parts, electrical equipment, and other details, even when both are called a D12. The serial number is the best starting point when checking parts.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. The engine serial number is on the rear left-hand side of the engine block behind the carburetor.

The table below shows the beginning tractor serial number for each Model D12 year and series:

 

1959-1961
Model D12 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1961 - Series II 3,001
1962-1964
Model D12 year Beginning serial number
1962 - Series II 3,638
1963 - Series II 5,501
1964 - Series II 6,012
1964 - Series III 9,001
1965-1968
Model D12 year Beginning serial number
1965 - Series III 9,192
1966 - Series III 9,508
1967 - Series III 9,830
1968 - Series III 9,979

Total production: About 4,070 Model D12 tractors.

Allis-Chalmers D12 Paint Reference

For restoration planning, the Allis-Chalmers D12 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D12 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Cork / Rubber Rollpack Gasket Material, cylindrical rolled gasket with cork and rubber composition for industrial sealing applications.

    Cork / Rubber Rollpack Gasket Material

    Allis-Chalmers
    $14.00
    AB-1830D
    Cork / Rubber Rollpack Gasket Material for making multi-purpose gaskets. USA made and sold as a 12" x 24" sheet.Part Number: AB-1830DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn...
  • Allis-Chalmers Pre-cleaner Cap Assembly - AB-470D, black and transparent pre-cleaner cap for industrial equipment, with mounting base and adjustable clamp.

    Pre-cleaner Cap Assembly AB-470D

    Allis-Chalmers
    $45.95
    AB-470D
    Product OverviewPre-cleaner cap assembly AB-470D for selected tractors and equipment. Only models with 3" ID base and 7" bowl are listed.Note: Replacement numbers are listed below for reference...
  • Allis-Chalmers REAR SPINOUT (Power Shift) RIM 13 X 28 - WH-008D

    Allis-Chalmers Rear Spinout Rim 13 x 28

    Allis-Chalmers
    $749.75
    WH-008D
    Rear spinout (Power Shift) wheel rim, 13 x 28. 4 rails with stop adjustment holes drilled 90 degrees perpendicular to the side of the rim, not 90 degrees to the rail. USA made.To determine rim width,...
  • A metal cover plate with a rectangular slot and three mounting holes, designed for use as a throttle governor control lever cover on Allis-Chalmers D10 III and D12 III farm tractors.

    Allis-Chalmers Throttle Governor Control Lever Cover D10 III D12 III

    Allis-Chalmers
    $31.50
    DJS1210C
    Throttle governor control lever cover for Allis-Chalmers tractors. Mostly found on D10 and D12 Series III tractors.Part Number: DJS1210CFitsAllis Chalmers D10 IIIAllis Chalmers D12 IIINotesCan be...
  • A brass oil gauge adapter or filter base adapter with threaded ends, designed for Allis-Chalmers farm tractors.

    Oil Gauge Adapter / Filter Base Adapter

    Allis-Chalmers
    $10.50
    5220K61
    Oil gauge adapter / filter base adapter for models using a 1/8" oil line.Part Number: 5220K61FitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsFord - various modelsIH...
  • Four sets of piston rings for an Allis-Chalmers 4-cylinder farm tractor, arranged in a grid on a white background. Each set contains black and silver split rings and a corrugated metallic oil ring; a DJSTractorParts.com watermark crosses the image.

    Piston Ring Set 4-Cylinder - Allis-Chalmers

    Allis-Chalmers
    $58.50
    AB-2070D
    Piston ring set for select 4-cylinder engines with 3-3/8" overbore. Measure before ordering, and rings cannot be returned if opened.Part Number: AB-2070DFitsAllis Chalmers - B, C, CA, IB, RC (with...
  • Allis-Chalmers Pre Cleaner Cap Assembly AB-383D, black and transparent plastic pre cleaner cap with mounting features for agricultural machinery.

    Pre Cleaner Cap Assembly AB-383D

    Allis-Chalmers
    $85.50
    AB-383D
    Pre Cleaner Cap Assembly AB-383DPre cleaner cap assembly for tractors with a 2-1/4" ID base. See listed fitment and replacement numbers below.FitsAllis Chalmers: variousCase: 450 Dsl, 530 Dsl, 570...
  • Allis-Chalmers D10 D12 Right Hand Side Panel, red metal tractor replacement part with multiple holes for mounting.

    Allis-Chalmers D10 D12 Right Hand Side Panel

    Allis-Chalmers
    $56.25
    ACR4420
    Part Number: ACR4420Right Hand Side PanelRight hand side panel for listed Allis-Chalmers D10 and D12 tractors.FitsAllis-Chalmers D10 - up to serial number 3500Allis-Chalmers D12 - up to serial number...
  • Allis-Chalmers CHROME EXHAUST STACK with Bend | Allis Chalmers B IB C CA RC D10 D12 D14 D15

    Chrome Exhaust Stack with Bend for Allis-Chalmers B, IB, C, CA, RC, D10, D12, D14, D15

    Allis-Chalmers
    $229.00
    AC-231D
    Chrome exhaust stack with bend for Allis-Chalmers B, IB, C, CA, RC, D10, D12, D14, and D15 up to SN 9001.Part Number: AC-231DFitsAllis Chalmers: B, IB, C, CA, RC, D10, D12, D14, D15 (up to sn 9001)...
  • Allis-Chalmers Economy Char-lynn Steering Coupler, metal steering coupler with U-joint for tractor steering systems.

    Economy Char-Lynn Steering Coupler AB-497D

    Allis-Chalmers
    $19.75
    AB-497D
    Economy Char-Lynn Steering CouplerThis economy coupler is for tractors with a U-joint at one end of the existing steering shaft.DJS part number: IH-555DFitsAllis Chalmers - variousCase -...
  • Allis-Chalmers Battery Cable 19 in Non-Insulated AB-421D, heavy-duty black braided cable with metal terminal connectors for secure battery connections.

    Battery Cable 19 in Non-Insulated AB-421D

    Allis-Chalmers
    $24.75
    AB-421D
    Battery Cable 19" Non-Insulated AB-421DHeavy duty ground cable. This non-insulated battery cable is 19" long, 2 gauge, and uses straight terminals with a 3/8" eyelet opening.FitsAllis Chalmers -...
  • Allis-Chalmers RAINCAP 2-1/2 in OD Zinc-Plated, metal rain cap for industrial or agricultural applications.

    RAINCAP 2-1/2 in OD Zinc-Plated

    Allis-Chalmers
    $34.50
    RC-014D
    RAINCAP with 2-1/2" OD zinc-plated construction.Fits straight chrome pipe applications.Part Number: RC-014DFitsAllis ChalmersFordIH / FarmallJohn DeereStraight chrome pipeSpecs2-1/2" ODZinc-plated
  • A vinyl decal for Allis-Chalmers farm tractors, specifically showing the shift pattern for the transmission range. The decal features a semi-hexagonal shape with numbers 1 through 8 on the left side and 2 through 6 on the right side, with a horizontal line across the middle labeled "SPEEDS". Beneath the line are the letters R and R, indicating the reverse gear. The text "SHIFT PATTERN" is at the top, and "PRINTED IN U.S.A." is at the bottom.

    Allis Chalmers D17 D10 D12 Range Transmission Shift Pattern Vinyl Cut Decal

    Allis-Chalmers
    $12.00
    DJS2255b
    Vinyl cut decal for the shift pattern on select Allis Chalmers tractors.Part Number: DJS2255bFitsAllis Chalmers D17 (Series I, II, III)Allis Chalmers D10 with a Range TransmissionAllis Chalmers D12...
  • A brown metal 21-tooth reverse idler gear for an Allis-Chalmers farm tractor, shown upright at an angle with its central bore visible.

    Allis Chalmers 21 Teeth Gear, Reverse Idler

    Allis-Chalmers
    $179.00
    70232498
    21 Teeth Gear, Reverse Idler for Allis-Chalmers CA, D10, D12, D14, and D15 applications.Part Number: 70232498FitsAllis Chalmers CAAllis Chalmers D10 (SN 3501 and up)Allis Chalmers D12 (SN 3001 and...
  • Allis-Chalmers Brake Lock Lever Spring, black coiled spring for Allis Chalmers D10 D12 D14 D15 D17 170 175 tractor models.

    Brake Lock Lever Spring for Allis Chalmers D10 D12 D14 D15 D17 170 175

    Allis-Chalmers
    $9.75
    70230364
    Brake lock lever spring for select Allis Chalmers tractors and hydraulic remote adjustment rod applications. Part Number: 70230364Fits Allis Chalmers D10 Allis Chalmers D12 Allis Chalmers D14 Allis...
  • Allis-Chalmers Category 1 Top Link for farm tractors, with a long, yellowish metal bar and a smaller connecting pin.

    Category 1 Top Link for Allis Chalmers and Various Models

    Allis-Chalmers
    $28.00
    FD-023D
    Category 1, Top LinkCat 1 top link with broad model application across multiple tractor brands.Part Number: FD-023DFitsAGCO Tractor: 4650 and other models using CAT 1 three point hitchAllis Chalmers:...