Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson, display showing a metallic bolt with a hexagonal head, screw threads, and a tapered end.

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson (Display)

    Allis-Chalmers
    $7.00
    662
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini. Use with parallel or 90 degree...
  • Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21, metallic hood latch snap fitting on brown background

    Hood Latch Snap Latch for Allis Chalmers D10 D12 D14 D15 D17 D19 D21 (Display)

    Allis-Chalmers
    $9.50
    650
    Part Number: CH4000 Hood Latch Snap Latch Hood latch snap latch for select Allis Chalmers tractors, bale throwers, balers, and some Gleaner combines. Strike not included. Fits ALLIS CHALMERS - D10,...
  • Allis Chalmers D10 D12 D14 D15 D17 D19 D21 Hood Latch, used display part for tractor hood latch replacement.

    Allis Chalmers D10 D12 D14 D15 D17 D19 D21 Hood Latch (Display)

    Allis-Chalmers
    $9.50
    649
    Part Number: CH4009 Allis Chalmers Hood Latch Loop-style snap hood latch for the Allis Chalmers tractors and Gleaner combines listed below. Fits Allis Chalmers D10 Allis Chalmers D12 Allis Chalmers...
  • 12 Volt Voltage Regulator for Allis-Chalmers WD45, D15, D17 Diesel, used parts display.

    12 Volt Voltage Regulator for Allis-Chalmers WD45 D15 D17 Diesel (Display)

    Allis-Chalmers
    $30.50
    635
    12 volt voltage regulator for select Allis-Chalmers and other tractor applications. This is a 12 V voltage regulator saddle mount. Part Number: ACR6368 Fits Allis Chalmers - [WD45 Diesel, D15...
  • Universal Oil Pressure Gauge, black dial with white markings and needle indicating pressure, mounted in a silver metal casing.

    Universal Oil Pressure Gauge 0-50 LB (Display)

    Allis-Chalmers
    $17.50
    622
    Universal oil pressure gauge with a 0-50 LB range and the applications listed below. Black face with white letters, chrome bezel, and no logo. Part Number: AB-082D Fits Allis Chalmers - WD45 Dsl,...
  • Allis-Chalmers Oil Pressure Gauge 0-80 PSI AC-262D, analog display with needle indicating normal oil pressure.

    Allis-Chalmers Oil Pressure Gauge 0-80 PSI AC-262D (Display)

    Allis-Chalmers
    $25.50
    615
    Allis-Chalmers Oil Pressure Gauge 0-80 PSI Part Number: AC-262D This 0-80 PSI oil pressure gauge is listed for the models below. It has 1/8" male pipe threads. Fits Allis Chalmers: A, D15 (DSL), D17...
  • Allis Chalmers Amp Gauge 60-0-60 70254407, display of a round amp gauge with a needle, black casing, and a white faceplate marked with ampere measurements.

    Allis Chalmers Amp Gauge 60-0-60 70254407 (Display)

    Allis-Chalmers
    $35.50
    628
    Aftermarket 60-0-60 gauge made just like the original ones that came on the tractor when new. Made to give it that original look. Part Number: DJS70254407 Fits Allis Chalmers D10 Allis Chalmers...
  • Ammeter 60-0-60 AMP Gauge 2-inch Diameter (Display), round analog current meter for measuring electrical current with black face and red needle.

    Ammeter 60-0-60 AMP Gauge 2" Dia (Display)

    Allis-Chalmers
    $18.50
    627
    Universal 60-0-60 AMP ammeter gauge with a 2" dia. hole fitment. Condition: New. Part Number: AMG60 Fits Allis Chalmers - 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 2RCP, 4650, 4660,...
  • Allis-Chalmers Oil Pressure Switch / Sensor 70240150, display showing a used part on a brown background with a label indicating part number 607 and usage as used parts or display.

    Allis-Chalmers Oil Pressure Switch / Sensor 70240150 (Display)

    Allis-Chalmers
    $20.00
    607
    Part Number: 70240150 Allis-Chalmers Oil Pressure Switch / Sensor Oil pressure switch / sensor for the listed Allis-Chalmers tractor applications. Fits Allis-Chalmers D17 IV Allis-Chalmers...
  • Cigarette Lighter for Allis Chalmers, Case, Cockshutt, IH, John Deere, used parts display, showing a metal lighter with a black cap labeled 'LIGHTER' on a cardboard background.

    Cigarette Lighter for Allis Chalmers, Case, Cockshutt, IH, John Deere (Display)

    Allis-Chalmers
    $24.00
    605
    Cigarette Lighter with an anodized aluminum knob imprinted with the word "LIGHTER". Part Number: IH-949D Fits Allis Chalmers: D14 (SN: 19001 & up), D17 (12 volt systems) Case: 300B, 320B, 400B,...
  • Delco Starter Solenoid for Allis-Chalmers D17 180 185 190 190XT 200 7000 7020, display view of the used starter solenoid assembly.

    Delco Starter Solenoid for Allis-Chalmers D17 180 185 190 190XT 200 7000 7020 (Display)

    Allis-Chalmers
    $31.75
    596
    Delco starter solenoid. New 12 volt, 4 terminal unit for 30 and 35 MT series. Fits the listed applications below. Part Number: AB-1366D Fits Allis-Chalmers: D17 DSL (up to sn 38964) (use with...
  • Light Visor for Allis-Chalmers D10 D12 D15 D17 D19, red curved tractor part for display or repair.

    Light Visor for Allis-Chalmers D10 D12 D15 D17 D19 (Display)

    Allis-Chalmers
    $15.75
    575
    Light visor MF-108D for select Allis-Chalmers, Massey Ferguson, and Massey Harris applications. New condition. Part Number: MF-108D Fits Allis Chalmers: D10 (SN: 9001 & up), D12 (SN: 9001 & up), D15...
  • 4409X Sealed Beam Combination Rear Light Bulb 12V, round with reflective surface, for vehicle signaling, on display.

    4409X Sealed Beam Combination Rear Light Bulb 12V (Display)

    Allis-Chalmers
    $16.00
    574
    Part Number: IH-899D Fits Allis Chalmers: D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7040, 7050, 7060, 7080 Avery Case Cockshutt: models with...
  • Bullet Style Tail Light Assembly for Allis-Chalmers D14, D15, D17, used parts display, with black casing and red lens, mounted on a metal bolt with green wiring.

    Bullet Style Tail Light Assembly for Allis-Chalmers D14, D15, D17 (Display)

    Allis-Chalmers
    $55.00
    573
    Bullet style tail light assembly for listed Allis-Chalmers, AC Cotton Picker, John Deere, and JD Lawn & Garden applications. Part Number: AB-3023D Fits Allis Chalmers D14 (SN 19001 and up) Allis...
  • Allis Chalmers 12V Sealed Beam Combo Tail Light Assembly, display image of a round black and clear sealed beam tail light with wiring, used for agricultural or industrial vehicles.

    Allis Chalmers 12V Sealed Beam Combo Tail Light Assembly (Display)

    Allis-Chalmers
    $93.50
    566
    Part Number: AC-355D Fits Allis Chalmers: 190XT (up to SN 19000), D10, D12, D15 (SN 9001 & up), D17 (SN 42001 & up), D19, D21, 190 Minneapolis Moline: JetStar 2, Jetstar 3 Super, M5, M504, M602,...
  • Allis-Chalmers Snap Coupler Latch Spring Oversized Loops 70235881, a metallic coil spring with large loops and eyelets at both ends for agricultural equipment.

    Allis-Chalmers Snap Coupler Latch Spring Oversized Loops 70235881

    Allis-Chalmers
    $8.75
    AC-269S
    Allis Chalmers snap coupler latch spring for the models listed below. Oversized end loops slip over the existing rivets for fast, hassle‑free installation—no need to pull the old rivets. 3-1/4"...
  • Allis Chalmers WD45 Diesel D17 Air Cleaner Cap, display of used tractor air cleaner cap on brown background with barcode label

    Allis Chalmers WD45 Diesel D17 Air Cleaner Cap(Display)

    Allis-Chalmers
    $26.50
    519
    Air cleaner cap for Allis Chalmers WD45 diesel and D17 applications. Includes a 2.275" I.D. inlet base and a 4.94" diameter cap. Part Number: AC-226D Fits Allis Chalmers WD45 Dsl Allis Chalmers D17...
  • Allis Chalmers B IB C CA D10 D12 D17 D19 Clutch Cover Plate, used display image of a pinkish clutch cover plate with two metal protrusions on a brown background.

    Allis Chalmers B IB C CA D10 D12 D17 D19 Clutch Cover Plate (Display)

    Allis-Chalmers
    $15.75
    547
    Clutch Inspection Cover Plate for Allis Chalmers tractors. Includes integral spring steel clips. Part Number: AC-189D Fits B IB C CA D10 D12 D17 D19 Replaces / Cross...