Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Sort By:

Display Type:
Filters
  • Allis-Chalmers Raincap 3 in. 3 3/16 in. I.D., a durable metallic rain cap with mounting plate for protection and weather resistance in agricultural machinery.

    Raincap 3 in. 3 3/16 in. I.D.

    Allis-Chalmers
    $16.00
    RC-009D
    Part Number: RC-009DRaincapRaincap with a 3" - 3 3/16" inside diameter.FitsAllis ChalmersCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonOliverSpecs3" - 3 3/16" I.D.
  • Allis-Chalmers 1 Wire Mini Alternator with Pulley 35 Amp 1/2 Pulley

    1 Wire Mini Alternator with Pulley 35 Amp

    Allis-Chalmers
    $199.50
    AB-535D
    1 wire mini alternator with pulley, 35 amp. Used to convert 6 volt systems to 12 volt systems on negative ground systems only. Preferred for tractors requiring a smaller diameter alternator for...
  • Allis-Chalmers ALTERNATOR PULLEY 2-1/2" OD 5/8" belt width

    Allis-Chalmers Alternator Pulley 2-1/2" OD 5/8" Belt Width

    Allis-Chalmers
    $23.95
    AB-495D
    Alternator pulley for the listed tractor applications. Same applications as part number AB-418D alternator.Part Number: AB-495DFitsAllis ChalmersCaseCockshuttFordIH / FarmallJohn DeereMassey...
  • Allis-Chalmers Universal Alternator Mounting Bracket Kit

    Universal Alternator Mounting Bracket Kit

    Allis-Chalmers
    $44.75
    AB-404D
    Universal alternator mounting bracket kit for switching from a generator to an alternator. May have to be drilled or modified for your application.Part Number: AB-404DFitsAllis...
  • Allis-Chalmers Raincap 1 1/4" - 1 7/16" I.D., a metal raincap with bolts and a latch for secure fit.

    Allis Chalmers Raincap 1 1/4" - 1 7/16" I.D.

    Allis-Chalmers
    $9.50
    RC-002D
    Part Number: RC-002DOverviewRaincap with 1 1/4" - 1 7/16" I.D. for the listed tractor applications.FitsAllis ChalmersCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonOliverSpecsInside...
  • Allis-Chalmers Raincap 2 1/2" - 2 11/16" I.D., metallic raincap with mounting bracket and hinges.

    Allis-Chalmers Raincap 2 1/2" - 2 11/16" I.D.

    Allis-Chalmers
    $11.25
    ACR1802
    Raincap with 2 1/2" - 2 11/16" I.D. Listed for select Allis-Chalmers and other tractor brands below.Part Number: ACR1802FitsAllis ChalmersCaseCockshutt: CO-OP E4, E5Cockshutt 40, 50, 560, 570 GOLDEN...
  • Allis-Chalmers RAINCAP 2-1/2 in OD Zinc-Plated, metal rain cap for industrial or agricultural applications.

    RAINCAP 2-1/2 in OD Zinc-Plated

    Allis-Chalmers
    $34.50
    RC-014D
    RAINCAP with 2-1/2" OD zinc-plated construction.Fits straight chrome pipe applications.Part Number: RC-014DFitsAllis ChalmersFordIH / FarmallJohn DeereStraight chrome pipeSpecs2-1/2" ODZinc-plated
  • Allis-Chalmers Oil Fill Breather Cap Without Clip, close-up of the black metal breather cap showing its internal structure and vent holes.

    Oil Fill Breather Cap Without Clip

    Allis-Chalmers
    $42.50
    AC-178D
    Oil fill breather cap without clip. Includes a copper filter element, has "OIL" stamped into the top, and is e-coated in black. Made in the USA.Part Number: AC-178DFitsAllis-Chalmers BAllis-Chalmers...
  • Allis-Chalmers Oil Fill Breather Cap With Clip for Allis-Chalmers, IH/Farmall, black metal, round with small openings and clip on top.

    Oil Fill Breather Cap With Clip for Allis-Chalmers, IH/Farmall

    Allis-Chalmers
    $42.25
    IH-406D
    Oil fill breather cap with clip. Includes an embossed "OIL" top and a copper filter element. E-coated in black and made in the USA.Part Number: IH-406DFitsAllis Chalmers: B, IB, C, CA, Late WD, WF...
  • Allis-Chalmers Headlight Assembly 6 Volt for Allis Chalmers D15, D17 Gas, gray metal with a clear lens and mounting hardware.

    Headlight Assembly 6 Volt for Allis Chalmers D15, D17 Gas

    Allis-Chalmers
    $52.50
    FD-192D
    6 volt headlight assembly. Mounts to side of grille, not fender. Bulbs listed will not fit original lights for Allis.Condition: New. If you need a bulb, see AB-450D 5 3/4" sealed beam style.Part...
  • Allis-Chalmers Headlight Assembly 12 Volt  FD-193D

    Headlight Assembly 12 Volt for Allis-Chalmers and Ford

    Allis-Chalmers
    $54.50
    FD-193D
    12 volt headlight assembly for select Allis-Chalmers and Ford models. Mounts to the side of the grille, not the fender. OD is 5-3/4" with a 1/2"-13 stud. Part Number: FD-193D Fits Allis Chalmers:...
  • Allis-Chalmers Sealed Beam Bulb 6V - AB-450D

    Allis-Chalmers 6V Sealed Beam Bulb

    Allis-Chalmers
    $17.75
    AB-450D
    6V sealed beam bulb with double contact and a 5.625" diameter.For listed Allis-Chalmers, Ford, and IH/Farmall applications.Part Number: AB-450DFitsAllis Chalmers: D15 (up to sn 9001), D17 Gas (up to...
  • Allis-Chalmers 5-5/8" Sealed Beam Bulb 12 Volt 4419 E4419, close-up of the sealed beam headlight with a reflective interior surface.

    Allis-Chalmers 12V Sealed Beam Bulb 4419

    Allis-Chalmers
    $17.75
    E4419
    12V sealed beam bulb with double contact, 5.625" diameter, and 35 watt output.Fits listed Allis-Chalmers, Ford, International, Massey Ferguson, and Massey Harris applications.Part Number:...
  • Allis-Chalmers Radiator Cap Allis Chalmers Case

    Allis-Chalmers Case Radiator Cap

    Allis-Chalmers
    $24.75
    AC-209D
    Chrome-plated radiator cap for select Allis-Chalmers and Case tractors and equipment. For pressurized systems and listed for the applications below.Part Number: AC-209DFitsAllis Chalmers - CA, D10,...
  • Allis-Chalmers Fuel cap - Says "Buy Clean Fuel - Keep it Clean"

    Buy Clean Fuel Fuel Cap for Allis Chalmers and IH

    Allis-Chalmers
    $11.75
    IH-226D
    Part Number: IH-226DBuy Clean Fuel Fuel CapFuel cap stamped with the message "BUY CLEAN FUEL - KEEP IT CLEAN".FitsAllis Chalmers AAllis Chalmers B up to SN 101, using buy clean fuel capAllis Chalmers...
  • Allis-Chalmers FUEL CAP  Allis Chalmers Case Ford JD Massey

    Fuel Cap for Allis-Chalmers, Case, Ford, JD, and Massey

    Allis-Chalmers
    $9.75
    MH-043D
    Chrome vented fuel cap with gasket for listed tractor models. Includes gasket and measures 2-5/8" O.D. with 1/4" height.Part Number: MH-043DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, 170, 175,...
  • Allis-Chalmers Rubberized Cork Gasket fits Fuel Cap / Radiator Cap

    Rubberized Cork Gasket for Fuel Cap or Radiator Cap

    Allis-Chalmers
    $2.00
    MH-043GKD
    Rubberized cork gasket for fuel cap or radiator cap use on listed tractors. Size is 2-5/8" OD and 1-1/2" ID.Part Number: MH-043GKDFitsAllis Chalmers: B, C, CA, D10, D12, D14, D15, D17, D19, G, I40,...
  • Allis-Chalmers WD WD45 Brake Rod Return Spring, black coiled metal spring with hooks on both ends for brake system support.

    Allis-Chalmers WD WD45 Brake Rod Return Spring

    Allis-Chalmers
    $14.75
    AC-268D
    Part Number: AC-268DBrake Rod Return SpringThis brake rod return spring fits Allis-Chalmers WD and WD45 tractors. It measures 6-5/8" long and is sold individually.FitsAllis-Chalmers: WD, WD45Replaces...