Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Sort By:

Display Type:
Filters
  • Allis-Chalmers Magneto PUSH-PULL Ignition Switch Allis Chalmers OEM

    Magneto PUSH-PULL Ignition Switch for Allis Chalmers

    Allis-Chalmers
    $26.75
    AB-489D
    Magneto PUSH-PULL Ignition Switch for Allis Chalmers and other listed applications. This switch has 1 screw type terminal and a threaded stem measuring 3/8 - 32 UNEF.Part Number: AB-489DFitsAllis...
  • Allis-Chalmers Plastic Sediment Bowl Screen

    Plastic Sediment Bowl Screen

    Allis-Chalmers
    $4.75
    AB-534D
    Plastic sediment bowl screen for Allis-Chalmers and other tractor applications. Sold individually.Part Number: AB-534DFitsAllis-Chalmers - 190XT, B, C, CA, G, D10, D12, D14, D15, D17, D19, D21, IB,...
  • Allis-Chalmers Gasket Paper Roll, 98 inches long, flat roll of gasket paper material

    Gasket Paper Roll 98" Long

    Allis-Chalmers
    $18.75
    AB-1844D
    Gasket paper roll for making general purpose gaskets. Not for high temperature applications.Part Number: AB-1844DFitsAllis Chalmers: VariousAvery: VariousCase: VariousCockshutt: VariousFord:...
  • Allis-Chalmers Gasket Paper Roll 108 Inches Long, plain brown gasket paper roll for industrial sealing applications.

    Gasket Paper Roll 108" Long

    Allis-Chalmers
    $26.75
    AB-1846D
    Gasket paper roll for making general purpose gaskets. Not for high temperature applications.Part Number: AB-1846DFitsAllis Chalmers: VariousAvery: VariousCase: VariousCockshutt: VariousFord:...
  • Allis-Chalmers Sediment Glass Bowl Only, clear glass sediment bowl with metal rim for industrial or agricultural equipment.

    Sediment Glass Bowl Only

    Allis-Chalmers
    $4.00
    AB-123D
    Replacement sediment glass bowl only for listed tractor applications. Fits multiple Allis-Chalmers, Case, Ford, International, John Deere, Massey Ferguson, Oliver, and White models.Part Number:...
  • Allis-Chalmers Tachometer Tach Cable Allis Chalmers D17 diesel D19 diesel

    Allis Chalmers Tachometer Tach Cable for D17 Diesel, D19 Diesel

    Allis-Chalmers
    $52.75
    AC-1230D
    Tachometer Tach Cable for Allis Chalmers tractors.Fits D17 Diesel and D19 Diesel models.Part Number: AC-1230DFitsD17 DieselD19 DieselReplaces / Cross Reference2300637023006370261604 (cable)70261608...
  • Allis-Chalmers Allis Chalmers D15 Diesel D17 D21 190 190XT Tachometer Tach Cable

    Allis Chalmers D15 Diesel D17 D21 190 190XT Tachometer Tach Cable

    Allis-Chalmers
    $36.75
    JD-790D
    Part Number: JD-790DOverviewTachometer tach cable for Allis Chalmers tractors. Fits D15 Diesel, D17, D21, 190, and 190XT applications listed below.FitsAllis Chalmers D15 (Diesel)Allis Chalmers D17...
  • Allis-Chalmers Sediment Bowl Assembly Allis Chalmers B C CA RC IB D14 D15 D17 D19

    Sediment Bowl Assembly Allis Chalmers B C CA IB RC D14 D15 D17 D19

    Allis-Chalmers
    $27.75
    ACR2404
    Sediment bowl assembly with broad equipment coverage across several brands and models.Part Number: ACR2404FitsAllis Chalmers BAllis Chalmers CAllis Chalmers CAAllis Chalmers I40Allis Chalmers...
  • Allis-Chalmers Allis Chalmers Lever Knob G CA WD WD45 D10 D12 D14 D15 D17 180 185 190 190XT 200 210 220

    Allis Chalmers Lever Knob G CA WD WD45 D10 D12 D14 D15 D17 180 185 190 190XT 200 210 220

    Allis-Chalmers
    $7.75
    AC-184D
    Allis Chalmers lever knob for hydraulic lever, snap coupler lever, drawbar coupler lever, and seat base applications.Part Number: AC-184DFitsHydraulic Lever Knob: CA, G, D17Snap Coupler Lever Knob:...
  • Allis-Chalmers Fuel Bail Assembly (Short Bowl), metal fuel bail with handle, used for agricultural machinery.

    Fuel Bail Assembly (Short Bowl)

    Allis-Chalmers
    $8.00
    AB-563D
    Fuel Bail Assembly (Short Bowl) for Allis-Chalmers and other listed tractor models. New part.Part Number: AB-563DFitsAllis Chalmers: B, IB, C, CA, D10, D12, D14, D15 Gas (up to sn 9001), D17 Gas (up...
  • Allis-Chalmers Fuel Filter Bail Assembly with Brass Nut, close-up view of metal fuel filter bail assembly featuring a brass nut for secure fitting.

    Fuel Filter Bail Assembly with Brass Nut

    Allis-Chalmers
    $12.75
    AB-236D
    Fuel Filter Bail Assembly with Brass Nut - AB-236D for the listed tractor models. New part.Part Number: AB-236DFitsAllis Chalmers: 190XT, D21, U, UC, 190 (2.315 Tall Glass Bowl), D15 (Gas (SN: 9001 &...
  • Allis-Chalmers Sediment Bowl Gasket 2"

    Sediment Bowl Gasket 2"

    Allis-Chalmers
    $2.25
    AB-039D
    Sediment Bowl Gasket 2" for the listed tractor models. Part Number: AB-039D Fits Allis Chalmers: B, C, CA, G, D10, D12, D14, D15 (Gas To Sn# 9000), D17 (Gas To Sn# 42000), I40, I400, I60, I600, 170,...
  • Allis-Chalmers Universal Choke Cable 72"

    Universal Choke Cable 72"

    Allis-Chalmers
    $14.75
    AB-423D
    Universal choke cable with a 72" metal sheathed length.Cut to length. Can also be used as a stop cable for diesel engines. Various tractors, forklifts, and other applications using 72" or less cable...
  • Allis-Chalmers Metal Sheathed Choke Cable 47"

    Metal Sheathed Choke Cable 47"

    Allis-Chalmers
    $22.75
    JD-718D
    Metal sheathed choke cable with a 47" length and plastic knob.Cut to length. Thread length where it goes through the dash is 3/8".Part Number: JD-718DFitsAllis Chalmers - various modelsAvery -...
  • Aftermarket Top Link, industrial mechanical linkage component for heavy machinery or agricultural equipment, shown with a rod and mounting eye

    Top Link, Category 2

    Aftermarket
    $45.75
    FD-346D
    Top Link, Category 2 for tractors using a Cat 2 three-point hitch.Part Number: FD-346DFitsAllis Chalmers: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 7000; and OTHER MODELS USING CAT 2 THREE POINT...
  • Allis-Chalmers Snap Coupler Latch Repair Kit, image showing springs, bolts, nuts, washers, and pins for tractor coupler repair.

    Allis Chalmers Snap Coupler Latch Repair Kit

    Allis-Chalmers
    $29.75
    AC-347D
    Allis Chalmers Snap Coupler Latch Repair Kit for 190XT, D10, D12, D14, D15, D17, D19, WD, WD45, and 190.2 kits used per tractor; sold individually.Part Number: AC-347DFitsAllis Chalmers - 190XT, D10,...
  • Allis-Chalmers Snap Coupler Latch Spring 70235881, gold-colored coiled metal latch spring with loop ends.

    Allis-Chalmers Snap Coupler Latch Spring 70235881

    Allis-Chalmers
    $8.75
    AC-269D
    Allis Chalmers snap coupler latch spring for the models listed below.3-1/4" overall length. Sold individually. 4 used per tractor. CA used a different spring that is no longer available, but this...
  • Aftermarket 3 PT Lynch Pin, metallic pin with a circular ring for securing attachments in farming equipment.

    3 PT Lynch Pin

    Aftermarket
    $2.00
    MI-119D
    3 PT Lynch Pin for 3-point equipped tractors and implements using 7/16" diameter pins.Part Number: MI-119DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJDMassey FergusonMassey...