Same Day Shipping On 99% Of Orders

Allis Chalmers WD45 Tractor Parts

About the Allis-Chalmers WD45

The WD45 replaced the WD in 1953 and gave Allis-Chalmers a stronger four-plow row-crop tractor without losing the WD's live PTO and Snap-Coupler layout. Its 226-cubic-inch gas, tractor-fuel, or LP engine made it noticeably more powerful than the WD.

The WD45 was the first Allis-Chalmers tractor offered with power steering, which became available in 1956. A six-cylinder diesel was added after Allis-Chalmers acquired Buda, and the WD45 remained in production through 1957.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left brake cover or the left rear of the axle housing. The gasoline engine serial number is on the left-hand side of the engine near the carburetor; diesel engine numbers are on the left-hand side of the diesel engine.

The table below shows the beginning tractor serial number for each Model WD45 year:

 

1953-1954
Model WD45 year Beginning serial number
1953 146,607
1954 160,386
1955-1956
Model WD45 year Beginning serial number
1955 190,993
1956 217,992
1957-1957
Model WD45 year Beginning serial number
1957 230,295

Total production: 90,382 Model WD45 tractors (83,536 gasoline and 6,509 diesel; the LP/tractor-fuel total is unknown).

Allis-Chalmers WD45 Paint Reference

For restoration planning, the Allis-Chalmers WD45 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers WD45 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • A brass nozzle part for Allis Chalmers farm tractors, specifically models WD45 and D17, displayed on a cardboard background with a white label reading "693 USED PARTS / DISPLAY."

    Marvel Schebler Carburetor Nozzle for Allis Chalmers WD45 D17 (Display)

    Allis-Chalmers
    $19.25
    693
    Marvel Schebler carburetor nozzle for select Allis-Chalmers tractors. Part Number: AC47-449 Fits WD45 D17 (All Series) Marvel Schebler carburetors: TSX561, TSX464, TSX773, TSX871 Replaces / Cross...
  • Needle & Seat Assembly Main Jet for Allis Chalmers WD45 D17, used part displayed on a surface with a label showing part number 692.

    Needle & Seat Assembly Main Jet for Allis Chalmers WD45 D17 (Display)

    Allis-Chalmers
    $25.75
    692
    Needle & seat assembly main jet for select Allis-Chalmers tractors. Part Number: AC43-671 Fits WD45 D17 (All Series) Marvel Schebler carburetors: TSX561, TSX464, TSX773, TSX871 Replaces / Cross...
  • Oil Fill Cap for Allis-Chalmers WD45, 170, 175, used parts display. The image shows a round metallic oil fill cap placed on a brown background with a label underneath.

    Oil Fill Cap for Allis-Chalmers WD45, 170, 175 (Display)

    Allis-Chalmers
    $15.75
    534
    Oil fill cap for gas-only Allis-Chalmers models. Fits WD45, 170, and 175. Part Number: AC-286D Fits Allis Chalmers: GAS ONLY: WD45, 170, 175 Replaces / Cross...
  • Radiator Shutter Crank for Allis Chalmers B, C, CA, IB, used display part with orange painted metal shaft and handle.

    Radiator Shutter Crank for Allis Chalmers B, C, CA, IB (Display)

    Allis-Chalmers
    $29.25
    684
    Radiator shutter crank handle for listed Allis Chalmers tractors and AC power units. Part Number: KI1099 Fits Allis Chalmers: B, C, CA, IB; serviceable for WC, WF, WD, WD45 AC Power Unit: W201,...
  • Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson, display showing a metallic bolt with a hexagonal head, screw threads, and a tapered end.

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson (Display)

    Allis-Chalmers
    $7.00
    662
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini. Use with parallel or 90 degree...
  • Thermostat 160 Degrees for Allis-Chalmers and More, displaying a used metal component with a label indicating it's a display item.

    Thermostat 160 Degrees for Allis-Chalmers and More (Display)

    Allis-Chalmers
    $31.75
    506
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter. Fits the listed tractor applications below. Part Number: IH-913D Fits Allis Chalmers: B (Engine SN: 126210 & up when equipped...
  • Universal Ammeter Gauge (20-0-20), analog display of current in amperes with a needle and a black faceplate with measurement markings.

    Universal Ammeter Gauge (20-0-20) (Display)

    Allis-Chalmers
    $15.75
    630
    Universal ammeter gauge with a 20-0-20 range and chrome bezel. Compatible with Allis-Chalmers, Case, Cockshutt, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver...
  • Universal Ammeter Gauge (20-0-20), display of black meter with white markings and needle indicating current in amperes.

    Universal Ammeter Gauge (20-0-20) (Display)

    Allis-Chalmers
    $15.75
    623
    Universal ammeter gauge with a 20-0-20 range and chrome bezel. Compatible with Allis-Chalmers, Case, Cockshutt, Ford, IH/Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver...
  • Universal Oil Pressure Gauge, black dial with white markings and needle indicating pressure, mounted in a silver metal casing.

    Universal Oil Pressure Gauge 0-50 LB (Display)

    Allis-Chalmers
    $17.50
    622
    Universal oil pressure gauge with a 0-50 LB range and the applications listed below. Black face with white letters, chrome bezel, and no logo. Part Number: AB-082D Fits Allis Chalmers - WD45 Dsl,...
  • Universal Tractor Seat Pan, display image of a purple tractor seat pan with multiple holes for mounting and ventilation.

    Universal Tractor Seat Pan (Display)

    Allis-Chalmers
    $43.75
    443
    Universal tractor seat pan with a 19" diameter, 9-hole pattern, and single-bolt mount. Make sure your application takes a single-bolt seat pan. Some tractors originally used a 21" seat pan, so verify...
  • A rusty, used Allis-Chalmers base oil filter assembly with a long, slender bolt attached, lying on a plain surface. The image highlights the worn and aged condition of the part.

    Used Allis Chalmers Base Oil Filter Assembly ( )

    Allis-Chalmers
    $10.00
    230
    Used Allis Chalmers base oil filter assembly (230) with missing stand pipe.We have new stand pipes available see part # KI1189.Part Number: 230FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers...
  • Allis-Chalmers Used Allis-Chalmers Oil Filter Base, used and weathered oil filter base with mounting bracket and attached hose.

    Used Allis-Chalmers Oil Filter Base

    Allis-Chalmers
    $25.00
    412
    Used Allis-Chalmers oil filter base, part 412.All sales final on used items.Part Number: 412FitsBIBCCAD10D12D14D17WDWD45WCRCWFNotesUsed item.No returns accepted on used items.
  • Zenith Carb Float for Allis-Chalmers WD45, D15, D17, display of used carburetor float with metallic components and mounting clip, on brown background with part label.

    Zenith Carb Float for Allis-Chalmers WD45, D15, D17 (Display)

    Allis-Chalmers
    $19.75
    691
    Zenith carb float for the listed applications. Verify the carburetor manufacturer number before ordering, since fitment depends on the carb MFG number. Part Number: AB-452D Fits Allis-Chalmers: WD45,...
  • Zenith Carburetor Float, used display set of two brass floats for carburetors on a brown background with a label indicating used parts.

    Zenith Carburetor Float (Display)

    Allis-Chalmers
    $27.75
    690
    Zenith Carburetor Float AB-454D. Check the carburetor number carefully before ordering. Fits the listed tractor applications and Zenith carburetor numbers below. Part Number: AB-454D Fits Allis...