Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers D Series 7/16 inch Snap-In Hole Plug 9563K84, metal hole plug with snap-in design for machinery maintenance and repair.

    Allis-Chalmers D Series 7/16" Snap-In Hole Plug 9563K84

    Allis-Chalmers
    $1.00
    9563K84
    Nickel-plated 7/16" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for headlight switch use.Part Number: 9563K84FitsAllis-Chalmers D Series TractorsSpecsSize: 7/16 inchNotesHeadlight...
  • A sediment bowl filter for Allis-Chalmers farm tractors, featuring a tall bowl assembly with a filter element inside. The filter has a metal body, a glass bowl for sediment collection, and a brass shut-off valve at the side. The image notes that the product is for illustrative purposes and the sediment bowl assembly is not included.

    Sediment Bowl Filter for Tall Bowl Assemblies

    Aftermarket
    $12.25
    DJS3039
    Fuel filter only. Sediment bowl not included. This fits our sediment bowl assembly ACR2406 and also fits replacement glass bowl
  • Black-and-white seat-back cushion for an Allis-Chalmers farm tractor, with black vinyl side panels and a white center panel.

    Black & White Seat Back Cushion on Wood - Allis Chalmers

    Allis-Chalmers
    $78.00
    ACR0853
    Black & white vinyl seat back cushion on wood for listed Allis Chalmers models.Part Number: ACR0853FitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210,...
  • Gray round-body muffler for an Allis-Chalmers farm tractor, shown with a black mounting bracket and metal clamp.

    Allis Chalmers Thru Hood Round Body Muffler

    Allis-Chalmers
    $77.50
    ACR1049
    Thru hood round body muffler for Allis Chalmers tractors.Part Number: ACR1049FitsAllis Chalmers: B, IB, C, CA (1938-1957)Allis Chalmers: D10, D12, D14, D15 Gas (up to sn 9001)Replaces / Cross...
  • Front crankshaft seal for Allis-Chalmers D10, D12, D14, D15, and late WD45 farm tractors; a dark circular seal with a gray inner ring.

    Allis Chalmers Front Crankshaft Seal - D10, D12, D14, D15, Late WD45

    Allis-Chalmers
    $19.00
    70226620
    Allis Chalmers front crankshaft seal for the listed D10, D12, D14, D15, and Late WD45 applications.Part Number: 70226620FitsD10D12D14D15 (up to 9001; 138 & 149 CID Gas)WD45 engine # 45-16650 &...
  • Close-up of a diamond-shaped silver Allis-Chalmers tractor emblem with a Persian orange sunburst, large white “A-C” letters, “ALLIS-CHALMERS” lettering, and a mounting hole at each side.

    Allis-Chalmers Persian Orange #2 Emblem

    Allis-Chalmers
    $34.00
    A9902
    Persian Orange #2 emblem for select Allis-Chalmers tractors, combines, and lawn and garden models.Part Number: A9902FitsAllis Chalmers: ED40, D10, D12, D14 (sn 19001 and up), D15, D17 (sn 24001 and...
  • Side view of a black, round 12V sealed-beam combo tail light assembly for an Allis-Chalmers farm tractor, with a clear ribbed lens, mounting stem, and red wire.

    Allis Chalmers 12V Sealed Beam Combo Tail Light Assembly

    Allis-Chalmers
    $116.75
    AC-355D
    Allis Chalmers 12V sealed beam combo tail light assembly in black with a 4-3/4" diameter.Part Number: AC-355DFitsAllis Chalmers: 190XT (up to SN 19000), D10, D12, D15 (SN 9001 & up), D17 (SN 42001 &...
  • Allis-Chalmers four-position ignition switch for farm tractors, shown with two keys attached; the switch has a metal cylindrical body and black terminal housing.

    4 Position Ignition Switch with 2 Keys

    Allis-Chalmers
    $19.75
    AB-400D
    4-position ignition switch for AG and light industrial equipment.Includes 2 keys.Part Number: AB-400DFitsAllis ChalmersAveryCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonMassey...
  • A silver bullet-shaped 12-volt tail light for an Allis-Chalmers farm tractor, with a red lens at the rear, a threaded mounting stud, and a white wire.

    Allis-Chalmers 12 Volt Bullet Tail Light

    Allis-Chalmers
    $47.75
    AC-264V12D
    12 volt bullet tail light for select Allis-Chalmers tractors. It includes a 12-volt bulb and a red glass lens.Part Number: AC-264V12DFitsAllis Chalmers: B, C, CA, G, WD, WD45, D10 (up to sn 9001),...
  • Black three-spoke steering wheel for an Allis-Chalmers farm tractor, with a ribbed grip around sections of the rim and a square center hub with a splined mounting hole.

    Allis Chalmers Black Steering Wheel

    Allis-Chalmers
    $57.50
    AC-134D
    Black steering wheel for listed Allis-Chalmers tractors and combines. Like original and made with all new material.Part Number: AC-134DFitsAllis Chalmers - ED40, D10, D12, D14 (sn 19001 and up), D15,...
  • Round, clear 4¾-inch glass headlight lens with a grid-textured face and smooth outer rim, for Allis-Chalmers farm tractors.

    4-3/4" Smooth Glass Lens with Guide Name

    Allis-Chalmers
    $15.50
    AB-388D
    4-3/4" smooth glass lens with a raised guide logo and raised part number cross reference abc388.Part Number: AB-388DFitsAllis Chalmers: B, IB, C, CA, D10, D12, D14, D15 (up to SN 9001), WC, WD, WD45,...
  • Allis-Chalmers Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey, representing a shiny, round metal fuel cap with a textured edge.

    Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey

    Allis-Chalmers
    $13.00
    AB-003D
    Chrome fuel cap with gasket and vented design for the listed tractor applications.Part Number: AB-003DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, I-40, I-400, I-60, I-600;...
  • Allis-Chalmers Thermostat 160 Degrees for Allis-Chalmers and More, gold-colored thermostatic valve with a conical top and circular base.

    Thermostat 160 Degrees for Allis-Chalmers and More

    Allis-Chalmers
    $39.75
    IH-913D
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter.Fits the listed tractor applications below.Part Number: IH-913DFitsAllis Chalmers: B (Engine SN: 126210 & up when equipped with...
  • A gasket designed for the back housing to transmission of Allis-Chalmers farm tractors. It is a flat, irregularly rounded shape with multiple bolt holes around the perimeter.

    Back Housing to Transmission Gasket

    Allis-Chalmers
    $14.25
    70225385
    Part Number: 70225385Back Housing to Transmission GasketBack housing to transmission gasket for listed Allis-Chalmers tractors.FitsAllis-Chalmers CAAllis-Chalmers BAllis-Chalmers CAllis-Chalmers...
  • Close-up of a dark metal Allis-Chalmers farm tractor clutch throw-out bearing, a circular component with a wide outer ring and open center, on a white background.

    Clutch Throw Out Bearing (IH Torque Amplifier Release Bearing)

    Allis-Chalmers
    $22.00
    AB-496D
    Clutch throw out bearing, also listed as an IH torque amplifier release bearing. Includes size details and cross references.Part Number: AB-496DFitsAllis Chalmers - 190XT, B, C, CA (W/ 9" Clutch),...
  • A black Flame Thrower Coil with a flame logo in the center, labeled as Pertronix Flame Thrower Coil 40,000 Volts 12V, designed for Allis-Chalmers farm tractors.

    Pertronix Flame Thrower Coil 40,000 Volts 12V

    Pertronix
    $56.50
    ACR3205
    Pertronix Flame Thrower Coil, 40,000 volts, 12V, oil filled, high performance.Heavy duty mount in vertical position. Use with electronic ignition kit.Part Number: ACR3205Specs40,000 volts12VNotesOil...
  • A set of eight metallic screw hardware pieces arranged in two rows, designed for Allis-Chalmers D series farm tractors.

    Allis Chalmers D10, D12, D14, D15, D17, D19, D21 Seat Screw Hardware Kit

    Allis-Chalmers
    $4.75
    70916081
    Allis Chalmers D10, D12, D14, D15, D17, D19, D21Seat Screw Hardware KitPart Number: 70916081FitsD10D12D14D15D17D19D21Replaces / Cross Reference70916081Specs8 piece set of seat cushion screws1/4-
  • Cream-colored 12-volt headlight assembly for Allis-Chalmers and Ford farm tractors, shown at an angle with a clear ribbed glass lens, metal mounting stud, and attached wire.

    Headlight Assembly 12 Volt for Allis-Chalmers and Ford

    Allis-Chalmers
    $54.50
    FD-193D
    12 volt headlight assembly for select Allis-Chalmers and Ford models. Mounts to the side of the grille, not the fender. OD is 5-3/4" with a 1/2"-13 stud. Part Number: FD-193D Fits Allis Chalmers:...