Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers farm tractor starter drive assembly (Bendix), shown on a white background with a heavy coil spring, toothed gear, and shaft.

    Starter Drive Assembly (Bendix) Allis Chalmers D14 WC WD WD45 G D10 D12

    Allis-Chalmers
    $49.95
    AB-458D
    Starter drive assembly (Bendix) for listed tractor applications.Part Number: AB-458DFitsAllis Chalmers - D14, WC, WD, WD45 (W/starter numbers: 1107017, 1107951, 1107474, 1107466, 1107962), G...
  • Flat, dark Allis-Chalmers water pump mounting gasket with three bolt holes and a large central opening, shown on a white background.

    Allis Chalmers Water Pump Mounting Gasket B C CA IB D10 D12 D14 D15

    Allis-Chalmers
    $5.75
    70234382
    Water pump mounting gasket for Allis Chalmers tractors listed below.Condition: NewPart Number: 70234382FitsAllis Chalmers BAllis Chalmers CAllis Chalmers CAAllis Chalmers IBAllis Chalmers D10Allis...
  • Black Allis-Chalmers tractor control knob with a rounded dome top and ridged band around its middle, shown against a white background. Fits D10, D12, D14, D15, and D17 farm tractors.

    OEM Choke Knob, Hydraulic Knob, Fuel Shut Off for Allis-Chalmers D10, D12, D14, D15, D17

    Allis-Chalmers
    $10.00
    70234686
    OEM Choke Knob, Hydraulic Knob, Fuel Shut Off for select Allis-Chalmers tractors.Part Number: 70234686FitsAllis Chalmers - D10 (as a choke knob), D12 (as choke knob), D14, D15 (as hydraulic spool...
  • A circular black metal thrust washer for Allis-Chalmers farm tractors, specifically a spindle thrust washer.

    Spindle Thrust Washer for Allis Chalmers Tractors

    Allis-Chalmers
    $7.50
    70218762
    Spindle thrust washer for select Allis Chalmers tractors.Part Number: 70218762FitsWDWD45WD45 DieselD10D12D14D15D19175180185190200D17 (early models with 5 bolt hub)170 (late models)6060 (with 96"...
  • Orange Allis-Chalmers tractor clutch cover plate with a rounded metal body, two raised mounting points, and bent mounting tabs, shown on a white background.

    Allis Chalmers B IB C CA D10 D12 D17 D19 Clutch Cover Plate

    Allis-Chalmers
    $19.75
    AC-189D
    Clutch Inspection Cover Plate for Allis Chalmers tractors.Includes integral spring steel clips.Part Number: AC-189DFitsBIBCCAD10D12D17D19Replaces / Cross Reference70208465208465
  • Allis-Chalmers farm tractor oil pump repair kit arranged on a white background, with metal parts, springs, and several shaped gaskets.

    Allis Chalmers Oil Pump Repair Kit

    Allis-Chalmers
    $149.75
    AC-3420D
    Allis Chalmers oil pump repair kit for listed tractors, forklifts, combines, power units, and a loader.Kit includes a rotor blade set, rotor blade springs, rotor blade shaft, and gaskets. Some...
  • Black cast rocker arm support stand for Allis-Chalmers D10, D12, D14, and D15 farm tractors, shown upright with a large central opening and a smaller hole at the top.

    Cast Rocker Arm Support Stand Allis Chalmers D10 D12 D14 D15

    Allis-Chalmers
    $37.75
    AC-1196D
    Cast rocker arm support stand for Allis Chalmers gas and LP models. Sold individually, 4 used per tractor.Part Number: AC-1196DFitsAllis Chalmers Gas / LP - D10, D12, D14, D15, I40, I60, I400, I600,...
  • Two brass fuel line adapter fittings with threaded ends, designed for Allis-Chalmers farm tractors, not made for automobiles.

    Fuel Line Adapter Fitting

    Allis-Chalmers
    $5.00
    AB-4285D
    Fuel Line Adapter Fitting for tractors and equipment using 5/16" fuel line.Part Number: AB-4285DFitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsInternational :...
  • Allis-Chalmers Tie Rod Boot FD-337D, black rubber protective cover for tie rod.

    Allis-Chalmers Tie Rod Boot FD-337D

    Allis-Chalmers
    $4.95
    FD-337D
    OverviewUniversal tie rod boot FD-337D for Allis-Chalmers and other tractor applications. This black rubber protective boot is listed with multiple brand and model fitments...
  • Allis-Chalmers Electrical Outlet Socket, metallic electrical outlet with mounting base and screw terminals for device connection.

    Electrical Outlet Socket

    Allis-Chalmers
    $32.75
    AB-395D
    2-pin electrical outlet socket for ALL implements with lights. Fits Allis-Chalmers, Avery, Case, Cockshutt, Ford, IH / Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver applications...
  • Black, glossy, spherical Allis-Chalmers hydraulic lever brake release knob, shown alone against a white background.

    Allis-Chalmers Hydraulic Lever Brake Release Knob

    Allis-Chalmers
    $5.75
    K21
    Hydraulic lever brake release knob for Allis-Chalmers equipment. Fits various models.Part Number: K21FitsAllis-Chalmers - fits various modelsSpecs3/8" - 24" thread1-3/8" diameter
  • Allis-Chalmers Oil Fill Breather Cap Without Clip, close-up of the black metal breather cap showing its internal structure and vent holes.

    Oil Fill Breather Cap Without Clip

    Allis-Chalmers
    $42.50
    AC-178D
    Oil fill breather cap without clip. Includes a copper filter element, has "OIL" stamped into the top, and is e-coated in black. Made in the USA.Part Number: AC-178DFitsAllis-Chalmers BAllis-Chalmers...
  • Round Allis-Chalmers farm tractor voltage meter with a black dial marked 8–16 volts, white needle near 8, red warning zones, and a chrome bezel.

    Voltage Meter 8 to 16 Volt

    Allis-Chalmers
    $32.75
    VOLT12LT
    Voltage meter with 8 to 16 volt range and illuminated dial.Part Number: VOLT12LTFitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational - variousJohn Deere -...
  • Cream-colored metal 4.25 x 16 front wheel rim for Allis-Chalmers, Cockshutt, and Massey Harris farm tractors, shown face-on with five bolt holes around the center opening.

    4.25 x 16 Front Wheel 5 Hole for Allis-Chalmers, Cockshutt, Massey Harris

    Allis-Chalmers
    $199.75
    AC-009D
    4.25 x 16 front wheel, 5 hole with listed applications below.Not For tubeless applications. Not recommended for tractors with loaders.Part Number: AC-009DFitsAllis Chalmers: D17, D15, D14 (Early w/ 5...
  • Allis-Chalmers 7/8 inch Snap-In Hole Plug, Nickel Plated, 9563K46, image showing front and back views of the nickel-plated metal hole plug with a serrated interior for secure fit.

    Allis-Chalmers 7/8" Snap-In Hole Plug, Nickel Plated - 9563K46

    Allis-Chalmers
    $1.50
    9563K46
    OverviewNickel plated 7/8" snap-in hole plug for Allis-Chalmers D Series tractors and cigarette lighter openings. Part Number: 9563K46.FitsAllis-Chalmers D Series tractorsCigarette lighter...
  • A metallic flexible choke cable with a round black knob at one end, labeled 'CHOKE,' designed for Allis-Chalmers farm tractors.

    Universal Choke Cable 64"

    Allis-Chalmers
    $19.75
    AC-17033019
    Universal Choke Cable with 64" metal sheathed cable length.Part Number: AC-17033019FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousIH / Farmall - Hydro 70, Hydro 86, 300,...
  • Allis-Chalmers Valve Grind Head Gasket Set, engine gasket kit with various gaskets including head gasket, valve seal, and other engine seals for Allis Chalmers D10, D12, D14, D15, H3.

    Allis-Chalmers Valve Grind Head Gasket Set AC-1658D

    Allis-Chalmers
    $49.75
    AC-1658D
    Allis-Chalmers Valve Grind Head Gasket SetPart Number: AC-1658DThis valve grind head gasket set is listed for the Allis-Chalmers tractor and crawler applications below.FitsAllis Chalmers: D10, D12,...
  • Close-up product photo of a black 12-volt, 3-post saddle-mount starter solenoid for an Allis-Chalmers farm tractor. It has two large copper threaded terminals, a smaller control terminal, and metal mounting tabs; labels read “12V” and “733 102.”

    Starter Solenoid 3 Post Saddle Mount 12 Volt

    Allis-Chalmers
    $31.25
    DR1467
    3 post saddle mount starter solenoid for 12 volt systems only. Fits multiple Allis-Chalmers, Case, Cockshutt, International, John Deere, Massey Ferguson, Minneapolis Moline, Oliver, and White...