Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

1959-1961

Model D10 yearBeginning serial number
1959 - Series I1,001
1960 - Series I1,950
1961 - Series I2,801

1962-1964

Model D10 yearBeginning serial number
1962 - Series I4,511
1963 - Series II6,801
1964 - Series II7,675
1964 - Series III9,001

1965-1968

Model D10 yearBeginning serial number
1965 - Series III9,204
1966 - Series III9,486
1967 - Series III9,795
1968 - Series III9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Zenith Main Jet Adjusting Needle Assembly | NEW Improved Design

    Zenith Main Jet Adjusting Needle Assembly

    Allis-Chalmers
    $28.00
    CT71-21
    Zenith main jet adjusting needle assembly with a new improved design and adjustable packing gland.Part Number: CT71-21FitsAllis Chalmers - Some WC, WF, WD, D10, D12Case - Some C, CC, D, DC, DI, DO, DV, R, RC, S, SC, SI, SO, VA, VAC, VAI, VAO,...
  • Allis-Chalmers Allis Chalmers D10 D12 D15 Fan Belt | 70233432

    Allis Chalmers D10 D12 D15 Fan Belt | 70233432

    Allis-Chalmers
    $14.75
    70233432
    Fan Belt for Allis Chalmers D10, D12, and D15For D10, D12 with fixed water pump pulley, and D15 Gas or LP models.Part Number: 70233432FitsD10D12 with fixed water pump pulleyD15 Gas or LP
  • Allis-Chalmers Sleeve Sealing O Rings for D10, D12, D14, D15, H3, I40, round black rubber sealing rings for machinery.

    Allis-Chalmers Sleeve Sealing O Rings for D10, D12, D14, D15, H3, I40

    Allis-Chalmers
    $8.25
    AC-2109D
    Allis-Chalmers Sleeve Sealing O Rings for 1 cylinder applications.Use with the model and serial details listed below. Replacement for 227563 and 70227563.Part Number: AC-2109DFitsD10D12D14D15 — up to SN: 9000H3 — up to SN: 6959I40 — All Gas, LP with G138...
  • Allis-Chalmers Clutch Throw Out Bearing - Allis Chalmers, International

    Clutch Throw Out Bearing - Allis Chalmers, International

    Allis-Chalmers
    $47.75
    AB-1928D
    Clutch throw out bearing for select Allis Chalmers and International applications, with listed dimensions preserved exactly as supplied.Part Number: AB-1928DFitsAllis Chalmers - B, IB (Using 8 1/2" Clutch), D10 (SN: 3502 & up), D12 (SN: 3002...
  • Allis-Chalmers Allis Chalmers Amp Gauge (60-0-60) - D10-D21 170-220 70254407 254407

    Allis Chalmers Amp Gauge 60-0-60 70254407

    Allis-Chalmers
    $44.50
    DJS70254407
    Aftermarket 60-0-60 gauge made just like the original ones that came on the tractor when new. Made to give it that original look.Part Number: DJS70254407FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis Chalmers D17Allis...
  • Allis-Chalmers STEP Allis Chalmers D10 D12 D14 D15

    Allis Chalmers D10 D12 D14 D15 Step

    Allis-Chalmers
    $98.75
    DJS1172D
    Aftermarket step for Allis Chalmers D10, D12, D14, and D15 tractors. It attaches to the existing holes on the platform.Part Number: DJS1172DFitsAllis Chalmers - D10, D12, D14, D15NotesSleek black finishNo drilling or modifications requiredCondition: New
  • Allis-Chalmers Tie Rod Boot - JD-736D, black rubber automotive part with a wide base and a hollow cylindrical opening.

    Tie Rod Boot JD-736D

    Allis-Chalmers
    $4.95
    JD-736D
    Tie Rod Boot JD-736DNew tie rod boot with the dimensions listed below. Review the fitment and replacement numbers carefully before ordering.FitsListed fitment includes:Allis ChalmersCaseCockshuttFordIH / Farmall: Cub, Cub LoBoy, Super A, Super AV, C,...
  • Allis-Chalmers Allis Chalmers Tachometer Drive Adapter D10 D12 D14 D15 D17 70228768

    Allis Chalmers Tachometer Drive Adapter 70228768

    Allis-Chalmers
    $18.75
    AC-1915D
    Tachometer drive adapter for select Allis Chalmers tractors and industrial models. Use with item # AC-1912D.Part Number: AC-1915DFitsI40I400I60D10D12D14D15 (Gas/LP)D17 (Gas/LP)Backhoe: 615I600 (Gas/LP)Replaces / Cross Reference70228768Specs1.561 O/A...
  • Allis-Chalmers Black Tractor Seat Pad Cushion 19"

    Black Tractor Seat Pad Cushion 19"

    Allis-Chalmers
    $39.50
    YF30BLK
    This black tractor seat pad cushion is for tractors with a round pan seat. It fits a 19" to 21" seat pan side to side and uses a drawstring attachment.Part Number: YF30BLKFitsAllis Chalmers - B, C, CA, D10, D12, D14, D15, D17, D19, G, I40,...
  • Allis-Chalmers 11/16" Snap-In Hole Plug "Nickel Plated" - 9563K61

    11/16" Snap-In Hole Plug Nickel Plated Allis Chalmers D Series

    Allis-Chalmers
    $1.25
    9563K61
    11/16 inch snap-in hole plug for Allis Chalmers D Series tractors. Nickel plated and described for push button start, fuse holder, and dash light use.Part Number: 9563K61FitsAllis Chalmers D Series TractorsSpecs11/16 inchNickel platedPush button start /...
  • Allis-Chalmers Rotor (FM Series) - FM147

    Allis-Chalmers FM Series Rotor FM147

    Allis-Chalmers
    $17.75
    FM147
    Allis-Chalmers FM Series Rotor FM147Part Number: FM147Rotor for the FM Series magneto applications listed below. Check the model list carefully to confirm compatibility.FitsAllis Chalmers - Various ModelsMinneapolis Moline - R, Z (using FM-J4, FM-JV4,...
  • Allis-Chalmers Spark Plug Wiring Set w/ Straight Boots

    Spark Plug Wiring Set with Straight Boots

    Allis-Chalmers
    $19.75
    AC-228D
    Part Number: AC-228DSpark Plug Wiring Set with Straight BootsSpark Plug Wiring Set w/ Straight Boots for applications using straight boots. See the fitment list below for the models supplied.FitsAC Combines - E (other models using straight boots)Allis...
  • Allis-Chalmers Unpainted Emblem Steering Wheel  Front Nose  Allis Chalmers ED40 D10 D12 D14 D15 D17 D19 D21

    Allis Chalmers ED40 D10 D12 D14 D15 D17 D19 D21 Steering Wheel Front Nose Emblem

    Allis-Chalmers
    $19.50
    ACR3996
    Unpainted steering wheel front nose emblem for listed Allis Chalmers applications.Part Number: ACR3996FitsAllis Chalmers ED40Allis Chalmers D10Allis Chalmers D12 (SN # 19001 and Up)Allis Chalmers D14Allis Chalmers D15Allis Chalmers D17 (SN#24001 and...
  • Allis-Chalmers Front Hub Oil Seal Kit With Washer And Retainer D10 D12 D14 D15 D17 RC WC WD WD45

    Allis-Chalmers Front Hub Oil Seal Kit With Washer And Retainer

    Allis-Chalmers
    $14.75
    FWSKAC2
    Front hub oil seal kit with washer and retainer for select Allis-Chalmers tractors. New condition.Part Number: FWSKAC2FitsAllis Chalmers D10 (w/ 5 bolt front hub SN: 3501 & up and High Clear up to SN: 3501)Allis Chalmers D12 (w/ 5 bolt front hub SN:...
  • Allis-Chalmers Headlight Lens w / Guide Name (4-3/4")

    Headlight Lens w/ Guide Name 4-3/4"

    Allis-Chalmers
    $15.75
    IH-352D
    Part Number: IH-352DHeadlight Lens w/ Guide NameThis 4-3/4" headlight lens has a "GUIDE" marking near the bottom of the lens and a dimpled outer surface. It is interchangeable with the original.FitsAllis-Chalmers: B, IB, C, CA, D10, D12, D14, D15 (up to...
  • Allis-Chalmers Bottom Seat Cushion for D10 D12 D14 D15 D17 D19 D21, black and white upholstered tractor seat cushion.

    Allis-Chalmers Bottom Seat Cushion for D10 D12 D14 D15 D17 D19 D21

    Allis-Chalmers
    $249.75
    AC-223D
    Restoration quality bottom seat cushion for select Allis-Chalmers tractors. Cushion is embossed like original and made in the USA.Part Number: AC-223DFitsD10D12D14D15D17D19D21170, 175, 180, 185, 190, 190XT, 210, 220 if using 2-piece seat without arm...
  • Pertronix Electronic Ignition Conversion Kit 12V Positive Ground Allis Chalmers B IB C CA D10 D12 D14 D15 D17 G WC WD WD45 WF

    Pertronix Electronic Ignition Conversion Kit 12V Positive Ground for Allis-Chalmers B IB C CA D10 D12 D14 D15 D17 G WC WD WD45 WF

    Pertronix
    $211.00
    ACR5102
    Pertronix Ignitor electronic ignition conversion kit for Delco 4-cylinder applications with 12V positive ground. Replaces points and condenser with a breakerless solid-state ignition system that fits under the stock distributor cap. Use this kit for the...
  • Allis-Chalmers REAR TIRE INNER TUBE VALVE - AB-384D

    Rear Tire Inner Tube Valve for Tractor Tubes with External Threads

    Allis-Chalmers
    $11.75
    AB-384D
    Rear tire inner tube valve for tractor tubes with external threads.Old style air/water valve, sold individually.Part Number: AB-384DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliverReplaces / Cross...