Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

1959-1961

Model D10 yearBeginning serial number
1959 - Series I1,001
1960 - Series I1,950
1961 - Series I2,801

1962-1964

Model D10 yearBeginning serial number
1962 - Series I4,511
1963 - Series II6,801
1964 - Series II7,675
1964 - Series III9,001

1965-1968

Model D10 yearBeginning serial number
1965 - Series III9,204
1966 - Series III9,486
1967 - Series III9,795
1968 - Series III9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Flywheel Ring Gear | Allis Chalmers D10 D12 D14 93 Teeth | 233305 70233305

    Allis Chalmers D10 D12 D14 Flywheel Ring Gear 93 Teeth

    Allis-Chalmers
    $124.25
    70233305
    Flywheel ring gear with 93 teeth for listed Allis Chalmers applications.Part Number: 70233305FitsAllis Chalmers D10 (Prior to SN 3501)Allis Chalmers D12 (Prior to SN 3001)Allis Chalmers D14 (Prior to engine SN 19001)Allis Chalmers Auxiliary Motors /...
  • Allis-Chalmers Ammeter Amp Gauge (30-0-30)

    Ammeter Amp Gauge (30-0-30)

    Allis-Chalmers
    $19.75
    AB-109D
    Ammeter amp gauge with a 30-0-30 range, chrome bezel, and 2" diameter hole fitment.Fits the tractor models and applications listed below.Part Number: AB-109DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series I,...
  • Allis-Chalmers Delco Distributor Shaft Bushing & Shim Kit

    Delco Distributor Shaft Bushing & Shim Kit for Allis-Chalmers, Avery, Case, Cockshutt, Oliver, John Deere

    Allis-Chalmers
    $25.75
    AB-3007D
    Delco distributor shaft bushing & shim kit for the listed Allis-Chalmers and other equipment applications.Use the included bushing and shims for the applications shown below. The bushing needs to be sized to the shaft after installation.Part Number:...
  • Allis-Chalmers Distributor Hold Down Clamp - AB-2523D

    Distributor Hold Down Clamp

    Allis-Chalmers
    $7.75
    AB-2523D
    Distributor hold down clamp for Delco distributor applications. Sold individually and used 2 per engine.Part Number: AB-2523DFitsAllis Chalmers - B, C, CA, D10, D12, D14, D15, D17, IB, WC, WD, WD45, WF, 170, 175, Industrial: 500, 510, 512, 610, 612, H3,...
  • Allis-Chalmers Hydraulic and Transmission Oil Dipstick Cap, orange dipstick cap with metal length for measuring oil levels.

    Allis-Chalmers Hydraulic and Transmission Oil Dipstick Cap

    Allis-Chalmers
    $27.75
    AC-302D
    Hydraulic and transmission oil dipstick cap for select Allis-Chalmers tractors.Cap and dipstick all in one.Part Number: AC-302DFitsCAWDWD45D10D12Replaces / Cross Reference70224611acs302
  • Allis-Chalmers Chrome Cover - JD-589CHD

    Allis-Chalmers Chrome Dash Light Cover

    Allis-Chalmers
    $18.99
    JD-589CHD
    Chrome dash light cover for select Allis-Chalmers, John Deere, and MM tractors. This 1-1/4 inch diameter chrome cover is for 2-screw style dash lights.Part Number: JD-589CHDFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, I70, 175, 180, 185, 190,...
  • Allis-Chalmers Allis Chalmers Side Nameplate Rivets & Steel Clips Set - DJS015

    Allis-Chalmers Side Nameplate Rivets & Steel Clips Set

    Allis-Chalmers
    $19.75
    DJS015
    Part Number: DJS015Allis-Chalmers Side Nameplate Rivets & Steel Clips SetSet includes 14 aluminum rivets and 14 steel clips. For select Allis-Chalmers tractor side nameplates.FitsD10D12D14D15D17I40I400I60I600
  • Allis-Chalmers Battery Cable 9 inch, non-insulated, AB-411D, with a braided metal wire and terminal connection for tractor battery installation.

    Battery Cable 9" Non-Insulated Ground Cable AB-411D

    Allis-Chalmers
    $18.75
    AB-411D
    Battery Cable 9" Non-Insulated Ground CableHeavy-duty 2 gauge battery cable with straight terminals. This 9" non-insulated ground cable is listed for select tractor applications.FitsAllis Chalmers - variousCase - variousCockshutt - variousFord -...
  • Allis-Chalmers Grill Screen for Allis-Chalmers D10 D12 D14 D15 D17 D19, square metal grill screen with grid pattern.

    Grill Screen for Allis-Chalmers D10 D12 D14 D15 D17 D19

    Allis-Chalmers
    $87.50
    ATC9918
    Grill screen for Allis-Chalmers D Series tractors. Can be used for replacing 100 and 200 Series grill screens.Part Number: ATC9918FitsAllis Chalmers: D Series (Late), D10, D12, D14, D15, D17, D19NotesCan be used for replacing 100 and 200 Series grill...
  • Allis-Chalmers Hydraulic Pump Opening Cover Gasket / Pump Body to Reservoir  Allis Chalmers CA D10 D12 70225194

    Allis-Chalmers CA D10 D12 Hydraulic Pump Opening Cover Gasket

    Allis-Chalmers
    $9.00
    70225194
    Hydraulic pump opening cover gasket for Allis-Chalmers CA, D10, and D12 models.Use for the pump body to reservoir connection.Part Number: 70225194FitsAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers D12Replaces / Cross Reference70225194225194
  • Allis-Chalmers Battery Cable 21" (Insulated) - AB-417D, black insulated battery cable with metal terminal end for connecting to batteries.

    Battery Cable 21" Insulated AB-417D

    Allis-Chalmers
    $19.75
    AB-417D
    Battery Cable 21" Insulated - AB-417D21-inch insulated battery cable with heavy-duty straight terminals and 2 gauge construction.Replacement for AM349T.FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational -...
  • Allis-Chalmers Water Temperature Gauge - UTG25

    Allis-Chalmers Water Temperature Gauge 130-280 Degree Range

    Allis-Chalmers
    $26.75
    UTG25
    Part Number: UTG25OverviewWater temperature gauge with a 130-280 degree range. Dash mount design with block fitting and chrome bezel included.Specs130-280 degree rangeDash mountIncludes block fittingIncludes chrome bezelNotesPart Number: UTG25
  • Allis-Chalmers LOWER WATER PIPE | Allis Chalmers D10 D12 D14 D15

    Allis-Chalmers Lower Water Pipe for D10 D12 D14 D15 | AC-249D

    Allis-Chalmers
    $39.75
    AC-249D
    Lower water pipe for Allis-Chalmers D10, D12, D14, and D15. Fits gas and LP models. SKU AC-249D.Part Number: AC-249DFitsAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers D14Allis-Chalmers D15NotesBrand not specified. New part.
  • Allis-Chalmers Delco Starter Commutator (Brush) Band Cover - AB-1203D

    Delco Starter Commutator Brush Band Cover

    Allis-Chalmers
    $19.75
    AB-1203D
    Delco starter commutator (brush) band cover for select Allis-Chalmers and other tractor models.Made in the USA. Comes complete as shown, with screw and nut.Part Number: AB-1203DFitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers CAAllis...
  • Allis-Chalmers Transmission Side Cover / Control Cover Gasket  Allis Chalmers CA D10 D12 ED40 70225433

    Allis-Chalmers Transmission Side Cover / Control Cover Gasket

    Allis-Chalmers
    $13.75
    70225433
    Transmission side cover / control cover gasket for Allis-Chalmers tractors. Fits the models listed below.Part Number: 70225433FitsAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers ED40Replaces / Cross...
  • Allis-Chalmers Viton Needle Float Valve Allis Chalmers C102V 70233914

    Allis-Chalmers Viton Needle Float Valve C102V

    Allis-Chalmers
    $15.50
    C102V
    Viton needle float valve for Allis-Chalmers tractors. Fits multiple models and replaces Zenith 70233914.Part Number: C102VFitsAllis-Chalmers BAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers RCAllis-Chalmers WCAllis-Chalmers WFAllis-Chalmers...
  • Allis-Chalmers Air Cleaner Oil Cup Clamp, black metal oil cup clamp with screw mechanism for securing air cleaner oil cup on Allis Chalmers tractors B, IB, C, CA, RC G.

    Air Cleaner Oil Cup Clamp for Allis-Chalmers B IB C CA RC G / IH IH-181D

    Allis-Chalmers
    $10.75
    IH-181D
    Air cleaner oil cup clamp for Allis-Chalmers B, IB, C, CA, RC, and G tractors.New replacement part with the key reference numbers preserved: AC 225817, IH 52872D, and IHS181.FitsAllis-Chalmers: B, IB, C, CA, RC, GIH / Farmall: Super AV, Early Super A (up...
  • Allis-Chalmers Steering Wheel Spinner, metallic steering wheel knob and mounting hardware on white background.

    Steering Wheel Spinner

    Allis-Chalmers
    $13.50
    ACR3275
    Ball bearing steering wheel spinner made of aluminum.Part Number: ACR3275FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational - variousJohn Deere - variousMassey Ferguson - variousMassey Harris - variousMinneapolis...