Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

1959-1961

Model D10 yearBeginning serial number
1959 - Series I1,001
1960 - Series I1,950
1961 - Series I2,801

1962-1964

Model D10 yearBeginning serial number
1962 - Series I4,511
1963 - Series II6,801
1964 - Series II7,675
1964 - Series III9,001

1965-1968

Model D10 yearBeginning serial number
1965 - Series III9,204
1966 - Series III9,486
1967 - Series III9,795
1968 - Series III9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers D10 Series III PTO Guard Shield, metal protective cover and mounting plate for tractor PTO safety.

    Allis Chalmers D10 Series III PTO Guard Shield

    Allis-Chalmers
    $105.00
    70241783
    New reproduction PTO guard shield for Allis Chalmers D10 Series III and D12 Series III. It comes primered.Part Number: 70241783FitsAllis Chalmers D10 Series IIIAllis Chalmers D12 Series IIIReplaces / Cross Reference24178370241783NotesPTO Guard, Power...
  • Allis-Chalmers D10 D12 Front Wheel Bearing Kit, collection of wheel bearing components including bearings, washers, and a felt filter.

    Allis Chalmers D10 D12 Front Wheel Bearing Kit

    Allis-Chalmers
    $59.75
    D10D12II
    Front wheel bearing kit for Allis Chalmers D10 Series II and D12 Series II tractors.Includes bearings, cups, felt seal, and retainer.Part Number: D10D12IIFitsD10 Series II SN 3501-9001D12 Series II SN 3001-9000 (Only)Replaces / Cross Reference70222214...
  • Allis-Chalmers Piston Ring Set (4-Cylinder) Allis Chalmers B C CA D10 D12 IB RC

    Piston Ring Set (4-Cylinder) - Allis Chalmers B C CA

    Allis-Chalmers
    $125.75
    AB-2072D
    Piston ring set for select 4-cylinder engines with 3-7/16" bore and (2) oil rings. Measure before ordering, and rings can not be returned if opened.Part Number: AB-2072DFitsAllis Chalmers - B, C, CA, D10, D12 (To Sn# 3500), IB, RCCase - 300, 310, 310B,...
  • Allis-Chalmers 9" 4 Button Spring Loaded Rockford Clutch Disc Allis Chalmers D10 D12 70248239

    9" 4 Button Spring Loaded Rockford Clutch Disc for Allis Chalmers D10, D12

    Allis-Chalmers
    $278.25
    70248239
    9" 4 button spring loaded Rockford clutch disc for listed Allis Chalmers applications. New part.Part Number: 70248239FitsAllis Chalmers D10 (SN 3502 & Up)Allis Chalmers D12 (SN 3002 & Up)Allis Chalmers Some HD3Allis Chalmers H3Replaces /...
  • Allis-Chalmers Clutch Pilot Bushing Allis Chalmers D10 D12 70236056

    Allis Chalmers D10 D12 Clutch Pilot Bushing

    Allis-Chalmers
    $54.50
    70236056
    Clutch pilot bushing for Allis Chalmers D10 and D12 tractors. Includes the listed serial ranges and replacement numbers below.Part Number: 70236056FitsAllis Chalmers D10 (SN 3501 & up)Allis Chalmers D12 (SN 3001 & up)Replaces / Cross...
  • Allis-Chalmers PRECLEANER KIT JD-741D 1306480, 249888, 70249888, green and clear dust pre-cleaner with yellow text and a brass knob on top.

    Precleaner Kit JD-741D 1306480 249888 70249888

    Allis-Chalmers
    $104.50
    JD-741D
    Precleaner Kit JD-741DPart number: JD-741DReplacement numbers: 1306480, 249888, 70249888Metal precleaner kit with metal lid and base. Fits models with a 3" ID base and 7" bowl. Measure before ordering.FitsAllis-Chalmers: 170, 175, 180, 185,...
  • Allis-Chalmers Wiring Harness Kit (Tractors with 1 Wire Alternator)  Allis Chalmers D10 D12 Series III

    Allis Chalmers D10 D12 Series III Wiring Harness Kit

    Allis-Chalmers
    $319.00
    DJS1036-1
    Wiring Harness Kit for tractors with a 1-wire alternator.Built for Allis Chalmers D10 and D12 Series III applications.Part Number: DJS1036-1FitsAllis Chalmers D10 (SN 9001 & UP, Series III)Allis Chalmers D12 (SN 9001 & UP, Series III)
  • Allis Chalmers Seat Shock Absorber with Spring, display model in orange color with coil spring and mounting hardware.

    Allis Chalmers Seat Shock Absorber with Spring (Display)

    $89.50
    432
    Seat shock absorber with spring for listed Allis-Chalmers tractor models. Replacement numbers 227917 (spring) and 227916 (shock) are provided. Part Number: AC-219D Fits Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT,...
  • 1 Wire Mini Alternator with Pulley 35 Amp, electrical component with pulley and wiring attached, used for automotive or generator applications.

    1 Wire Mini Alternator with Pulley 35 Amp (Display)

    $159.50
    466
    1 wire mini alternator with pulley, 35 amp. Used to convert 6 volt systems to 12 volt systems on negative ground systems only. Preferred for tractors requiring a smaller diameter alternator for clearance. Part Number: AB-535D Fits Allis-Chalmers...
  • Wire Mini Alternator with Pulley 35 Amp, electrical automotive part with wiring connector in a display box.

    1 Wire Mini Alternator with Pulley 35 Amp (Display)

    $159.50
    465
    1 wire mini alternator with pulley, 35 amp. Used to convert 6 volt systems to 12 volt systems on negative ground systems only. Preferred for tractors requiring a smaller diameter alternator for clearance. Part Number: AB-535DFits Allis-Chalmers...
  • 105 Amp One Wire Alternator with Pulley for 6V to 12V Conversion, metallic alternator on a plain background with an orange tag.

    105 Amp One Wire Alternator with Pulley for 6V to 12V Conversion

    $103.75
    464
    105 amp one wire alternator with pulley, used for converting 6 volt to 12 volt systems. Built-in regulator and 1 wire hook up for 12 volt negative ground systems. Part Number: AB-418D Fits Allis Chalmers: Can be used on IB, B, C, CA, D10, D12, D14 by...
  • 160 Degree Thermostat - Allis Chalmers, Case, Cockshutt, Massey Ferguson display, showing used parts including thermostat components and seals arranged on a brown surface.

    160 Degree Thermostat - Allis Chalmers, Case, Cockshutt, Massey Ferguson (Display)

    $27.75
    507
    160 degree thermostat for select Allis Chalmers, Case, Cockshutt, Massey Ferguson, and Massey Harris models. Part Number: AB-1898D Fits Allis Chalmers - D10, D12, D14, D15 with 4 bolt housing. WD, WD45, D17 with 3 bolt housing, B, C, CA, IB, 170, 175,...
  • 6 Volt Distributor Coil AB-011D, display model of an automotive ignition coil with mounting terminal and electrical connectors.

    6 Volt Distributor Coil AB-011D (Display)

    $22.25
    550
    6 Volt Distributor Coil - AB-011D This 6 volt distributor coil is listed as AB-011D and fits listed tractor applications. It includes multiple cross-reference numbers across several brands. Fits Allis Chalmers - G, B, C, CA, IB, RC, WD45, WD, WC, WF,...
  • Product 63 Amp One Wire Alternator with Pulley for 6V to 12V Conversion, automotive alternator with pulley and metallic finish on a brown surface.

    63 Amp One Wire Alternator with Pulley for 6V to 12V Conversion (Display)

    $103.75
    462
    63 amp one wire alternator with pulley, used for converting 6 volt to 12 volt systems. Built-in regulator and 1 wire hook up for 12 volt negative ground systems. Part Number: AB-418D Fits Allis Chalmers: Can be used on IB, B, C, CA, D10, D12, D14 by...
  • Allis Chalmers B IB C CA D10 D12 D17 D19 Clutch Cover Plate, display of a used pink metal clutch cover plate with signs of wear and paint peeling.

    Allis Chalmers B IB C CA D10 D12 D17 D19 Clutch Cover Plate (Display)

    $15.75
    547
    Clutch Inspection Cover Plate for Allis Chalmers tractors. Includes integral spring steel clips. Part Number: AC-189D Fits B IB C CA D10 D12 D17 D19 Replaces / Cross Reference 70208465 208465 "This part was used as a display piece at tractor shows...
  • Allis Chalmers Cream Emblem Steering Wheel, display of a vintage metal automobile emblem with cream and black coloring, featuring the Allis Chalmers logo.

    Allis Chalmers Cream Emblem Steering Wheel (Display)

    $27.50
    526
    Allis Chalmers Cream Emblem Steering Wheel with die cast, chromed finish and cream painted background. Use this emblem on the steering wheel or front grille nose where applicable. Part Number: A9901 Fits Allis Chalmers: ED40, D10, D12, D14 (sn 19001 and...
  • Allis Chalmers D10 Series II D12 Series II PTO Guard Shield, display image showing a gray protective shield with a numbered orange tag attached.

    Allis Chalmers D10 Series II D12 Series II PTO Guard Shield (Display)

    $84.00
    452
    New reproduction PTO guard shield for Allis Chalmers D10 Series II and D12 Series II. It comes primered. Part Number: 70236004 Fits Allis Chalmers D10 Series II Allis Chalmers D12 Series II Replaces / Cross Reference 236004 70236004 Notes PTO Guard,...
  • Allis Chalmers D10 Series III PTO Guard Shield, display image showing a used metal shield with a price tag of $105.00 and an orange tag attached.

    Allis Chalmers D10 Series III PTO Guard Shield (Display)

    $84.00
    451
    New reproduction PTO guard shield for Allis Chalmers D10 Series III and D12 Series III. It comes primered. Part Number: 70241783 Fits Allis Chalmers D10 Series III Allis Chalmers D12 Series III Replaces / Cross Reference 241783 70241783 Notes PTO...