Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Bail Assembly for Retractable Drawbar with product number 70236375, depicted in the image, showing a metal assembly with multiple holes for attachment.

    Bail Assembly for Retractable Drawbar 70236375

    Allis-Chalmers
    $195.00
    70236375
    Bail assembly for retractable drawbar with 3 point hitch for the listed Allis-Chalmers tractors.Part Number: 70236375FitsAllis Chalmers - D10 (SN 3501 & up), D12 (SN 3001 & up)Replaces / Cross...
    Add to Cart
  • Allis-Chalmers D10 D12 Hood with Round Hole, tractor hood replacement part, metal engine cover with round openings for ventilation.

    Allis Chalmers D10 D12 Hood with Round Hole

    Allis-Chalmers
    $465.00
    DJS1012-R
    Hood with Round Hole for select Allis Chalmers D10 and D12 tractors.Made exactly like original hoods are made in the United States.Part Number: DJS1012-RFitsAllis Chalmers D10Allis Chalmers D12...
    Add to Cart
  • Allis-Chalmers Allis Chalmers D10 Series II D12 Series II PTO Guard Shield 236004 70236004

    Allis Chalmers D10 Series II D12 Series II PTO Guard Shield

    Allis-Chalmers
    $105.00
    70236004
    New reproduction PTO guard shield for Allis Chalmers D10 Series II and D12 Series II. It comes primered.Part Number: 70236004FitsAllis Chalmers D10 Series IIAllis Chalmers D12 Series IIReplaces /...
    Add to Cart
  • Allis-Chalmers Battery Cable 10-1/2 inch Insulated AB-407D, with metal clamps and black insulated wire for connecting battery terminals.

    Battery Cable 10-1/2" Insulated AB-407D

    Allis-Chalmers
    $17.00
    AB-407D
    Battery Cable 10-1/2" InsulatedHeavy-duty insulated battery cable with straight terminals. This 10-1/2" cable is 2 gauge with a 3/8" eyelet opening.FitsAllis...
    Add to Cart
  • Allis-Chalmers CA D10 D12 D14 D15 D17 WD WD45 Drawbar Clamp, metal rectangular bracket with two circular holes for mounting.

    Allis Chalmers CA D10 D12 D14 D15 D17 WD WD45 Drawbar Clamp

    Allis-Chalmers
    $28.00
    70224650
    Part Number: 70224650Drawbar ClampFor Allis-Chalmers CA, D10, D12, D14, D15, D17, WD, WD45, WC, and WF models. New condition.FitsAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers...
    Add to Cart
  • Allis-Chalmers Piston Ring Set 4-Cylinder - AB-2086D

    Piston Ring Set 4-Cylinder - Allis-Chalmers B C CA

    Allis-Chalmers
    $125.75
    AB-2086D
    Piston ring set for select 4-cylinder engines with 3-7/16" bore. Measure old rings before ordering, and rings can not be returned if opened.Part Number: AB-2086DFitsAllis Chalmers - B, C, CA, IB, RC...
    Add to Cart
  • A 9-inch pressure plate clutch for Allis-Chalmers farm tractors, designed for several models including B, IB, C, CA, D10, D12, D14, and WF. The clutch assembly is metallic with multiple attachment points and levers for installation.

    9" Pressure Plate Clutch for Allis-Chalmers B, IB, C, CA, D10, D12, D14, WF

    Allis-Chalmers
    $261.00
    70228926
    9" pressure plate clutch for Allis-Chalmers B, IB, C, CA, D10, D12, D14, and WF.Part Number: 70228926FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers D10 (UP to...
    Add to Cart
  • A black metal Snap Coupler Drawbar for Allis-Chalmers farm tractors, with multiple holes for attachment, designed for models CA, D10, and D12.

    Allis-Chalmers Snap Coupler Drawbar CA D10 D12 70226661

    Allis-Chalmers
    $195.00
    70226661
    Allis-Chalmers Snap Coupler Drawbar. Aftermarket part, made in the USA. SKU 70226661.Part Number: 70226661FitsAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers D12Ordering NotesCheck mounting...
    Add to Cart
  • Allis-Chalmers Zenith Style Carburetor for Allis Chalmers D10 D12 70235975, metallic carburetor with attached linkage and a gasket.

    Zenith Style Carburetor for Allis Chalmers D10 D12 70235975

    Allis-Chalmers
    $289.75
    70235975
    Zenith style carburetor for Allis Chalmers D10 and D12 tractors.Includes carburetor mounting gasket. Please verify your carburetor manufacturer number before ordering.Part Number: 70235975FitsAllis...
    Add to Cart
  • Allis-Chalmers D10 Series III PTO Guard Shield, metal protective cover and mounting plate for tractor PTO safety.

    Allis Chalmers D10 Series III PTO Guard Shield

    Allis-Chalmers
    $105.00
    70241783
    New reproduction PTO guard shield for Allis Chalmers D10 Series III and D12 Series III. It comes primered.Part Number: 70241783FitsAllis Chalmers D10 Series IIIAllis Chalmers D12 Series IIIReplaces /...
    Add to Cart
  • A collection of front wheel bearing kit components, including bearings, rings, a felt gasket, and other metal parts designed for Allis-Chalmers D10 D12 farm tractors.

    Allis Chalmers D10 D12 Front Wheel Bearing Kit

    Allis-Chalmers
    $59.75
    D10D12II
    Front wheel bearing kit for Allis Chalmers D10 Series II and D12 Series II tractors.Includes bearings, cups, felt seal, and retainer.Part Number: D10D12IIFitsD10 Series II SN 3501-9001D12 Series II...
    Add to Cart
  • Allis-Chalmers Piston Ring Set (4-Cylinder) Allis Chalmers B C CA D10 D12 IB RC

    Piston Ring Set (4-Cylinder) - Allis Chalmers B C CA

    Allis-Chalmers
    $125.75
    AB-2072D
    Piston ring set for select 4-cylinder engines with 3-7/16" bore and (2) oil rings. Measure before ordering, and rings can not be returned if opened.Part Number: AB-2072DFitsAllis Chalmers - B, C, CA,...
    Add to Cart
  • A circular clutch disc designed for Allis-Chalmers farm tractors, specifically for models D10 and D12. The disc features a central spline with gear-like teeth, surrounded by a black segmented ring with four gold-colored friction pads evenly spaced around the perimeter. The overall diameter is 9 inches, and it appears to be spring-loaded to enhance performance.

    9" 4 Button Spring Loaded Rockford Clutch Disc for Allis Chalmers D10, D12

    Allis-Chalmers
    $278.25
    70248239
    9" 4 button spring loaded Rockford clutch disc for listed Allis Chalmers applications. New part.Part Number: 70248239FitsAllis Chalmers D10 (SN 3502 & Up)Allis Chalmers D12 (SN 3002 & Up)Allis...
    Add to Cart
  • Allis-Chalmers D10 D12 Clutch Pilot Bushing, brass cylindrical component for clutch assembly.

    Allis Chalmers D10 D12 Clutch Pilot Bushing

    Allis-Chalmers
    $54.50
    70236056
    Clutch pilot bushing for Allis Chalmers D10 and D12 tractors. Includes the listed serial ranges and replacement numbers below.Part Number: 70236056FitsAllis Chalmers D10 (SN 3501 & up)Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Snap Coupler Latch Spring Oversized Loops 70235881, a metallic coil spring with large loops and eyelets at both ends for agricultural equipment.

    Allis-Chalmers Snap Coupler Latch Spring Oversized Loops 70235881

    Allis-Chalmers
    $8.75
    AC-269S
    Allis Chalmers snap coupler latch spring for the models listed below. Oversized end loops slip over the existing rivets for fast, hassle‑free installation—no need to pull the old rivets. 3-1/4"...
    Add to Cart
  • Allis-Chalmers Precleaner Kit JD-741D 1306480 249888 70249888, green and clear precleaner assembly for agricultural machinery.

    Precleaner Kit JD-741D 1306480 249888 70249888

    Allis-Chalmers
    $104.50
    JD-741D
    Precleaner Kit JD-741DPart number: JD-741DReplacement numbers: 1306480, 249888, 70249888Metal precleaner kit with metal lid and base. Fits models with a 3" ID base and 7" bowl. Measure before...
    Add to Cart