Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

1959-1961

Model D10 yearBeginning serial number
1959 - Series I1,001
1960 - Series I1,950
1961 - Series I2,801

1962-1964

Model D10 yearBeginning serial number
1962 - Series I4,511
1963 - Series II6,801
1964 - Series II7,675
1964 - Series III9,001

1965-1968

Model D10 yearBeginning serial number
1965 - Series III9,204
1966 - Series III9,486
1967 - Series III9,795
1968 - Series III9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers 3" O.D. RAINCAP Zinc PLATED

    3 in. O.D. Raincap Zinc-Plated

    Allis-Chalmers
    $44.75
    RC-015D
    Part Number: RC-015D3" O.D. Raincap Zinc-PlatedFits straight chrome pipe on listed applications. Zinc-plated with 3" O.D.FitsAllis Chalmers BAllis Chalmers IBAllis Chalmers CAllis Chalmers CAAllis Chalmers RCAllis Chalmers D10Allis Chalmers D12Allis...
  • Allis-Chalmers 1ST PINION SHAFT GEAR | Allis Chalmers CA D10 D12 D14 D15 | 70228296 70225835

    Allis Chalmers 1st Pinion Shaft Gear CA D10 D12 D14 D15

    Allis-Chalmers
    $133.75
    70228296
    1st pinion shaft gear for Allis Chalmers CA, D10, D12, D14, and D15 tractors.50 teeth.Part Number: 70228296FitsAllis Chalmers CA (13291 & up)Allis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Replaces / Cross...
  • Allis-Chalmers D10 D12 Series 3 Operators Instructions Manual, orange cover manual with tractor illustration and manufacturer details

    Allis-Chalmers D10 D12 Series 3 Operators Instructions Manual

    Allis-Chalmers
    $20.00
    MAND10D12
    Allis-Chalmers D10 and D12 Series 3 operators instructions manual. Reprint. New condition.Part Number: MAND10D12FitsAllis Chalmers D10 9001 and upAllis Chalmers D12 9001 and upSpecs49 pagesNotesOperator's manual (reprint).Sometimes referred to as the...
  • Allis-Chalmers Tachometer for D10, D12 9000 & Up, round analog automotive tachometer with black and white dial, yellow needle, and digital display for hours at 1650 RPM.

    Allis-Chalmers Tachometer for D10, D12 9000 & Up

    Allis-Chalmers
    $148.00
    AC-311RT
    Tachometer for Allis-Chalmers D10 and D12 tractors.Part Number: AC-311RTFitsD10 serial number 9000 & upD12 serial number 9000 & upReplaces / Cross Reference7024172724172770242750NotesOnly models equipped with high / low range transmission
  • Allis-Chalmers Collar, Pinion Shaft 2nd & 3rd Gear (8 Tooth) | Allis Chalmers CA D10 D12 D14 D15 | 70228291

    Allis Chalmers Collar, Pinion Shaft 2nd & 3rd Gear (8 Tooth)

    Allis-Chalmers
    $212.50
    70228291
    Collar, Pinion Shaft 2nd & 3rd Gear for Allis-Chalmers CA, D10, D12, D14, and D15 applications.Part Number: 70228291FitsAllis Chalmers CA (SN 13291 and up)Allis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Replaces / Cross...
  • Allis-Chalmers D10 1961-1963 Series II Vinyl Cut Decal Set, vintage tractor decal set for Allis-Chalmers D10 tractor from 1961 to 1963.

    Allis Chalmers D10 1961-1963 Series II Vinyl Cut Decal Set

    Allis-Chalmers
    $65.00
    DJS304
    Allis Chalmers D10 1961-1963 Series II vinyl cut decal set. Equipped with metal nameplate. Metal nameplate not included.Part Number: DJS304FitsAllis Chalmers D10 1961-1963 Series IINotesEquipped with metal nameplate.Nameplates not included.No refunds on...
  • Allis-Chalmers RAINCAP 3" - 3 3/16" I.D. - RC-009D

    Raincap 3 in. 3 3/16 in. I.D.

    Allis-Chalmers
    $16.00
    RC-009D
    Part Number: RC-009DRaincapRaincap with a 3" - 3 3/16" inside diameter.FitsAllis ChalmersCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonOliverSpecs3" - 3 3/16" I.D.
  • Allis-Chalmers Clutch Disc 9" 24 Spline  Allis Chalmers D10 D12  70237137

    Allis-Chalmers D10 D12 Clutch Disc 9" 24 Spline

    Allis-Chalmers
    $242.00
    70237137
    Woven clutch disc for Allis-Chalmers D10 and D12.Part Number: 70237137Replaces / Cross Reference70237137, 237137SpecsDiameter: 9"Spline: 24Hub: 1-1/4"FitsAllis-Chalmers D10 (SN 3501 & UP)Allis-Chalmers D12 (SN 3001 & UP)
  • Allis-Chalmers D10 D12 Series III Left Hand Side Panel, tractor side panel in black with mounting holes.

    Allis-Chalmers D10 D12 Series III Left Hand Side Panel

    Allis-Chalmers
    $59.75
    70241771
    Part Number: 70241771OverviewLeft hand side panel for Allis-Chalmers D10 and D12 Series III tractors. New item with replacement numbers 70241771 and 241771.FitsAllis-Chalmers D10 Series IIIAllis-Chalmers D12 Series IIIReplaces / Cross...
  • Allis-Chalmers New Zenith Carburetor USA  Allis Chalmers D10 D12  70235975

    Zenith Carburetor for Allis-Chalmers D10 and D12

    Allis-Chalmers
    $549.00
    IH-905D
    New Zenith carburetor for Allis-Chalmers D10 and D12.Part Number: IH-905DReplaces / Cross Reference70235975International / Farmall - A, A-21, A-I, A1, AV, AV-1, B, BN, C, Super A, Super C, T4, 100, 130, 140, 200, 230; 3454892R92, 352047R91, 352377R92,...
  • Allis-Chalmers Battery Cable 14-1/2 inches, insulated, with metal terminal and clamp, for tractor battery connections.

    2 Gauge Battery Cable 14-1/2" Insulated AB-413D

    Allis-Chalmers
    $18.75
    AB-413D
    Battery Cable 14-1/2" InsulatedThis 2 gauge insulated battery cable is 14-1/2 inches long and has 90 degree terminal ends with a 3/8" eyelet opening. On some applications, the eyelet hole may have to be drilled bigger.FitsAllis-Chalmers -...
  • Allis-Chalmers Drawbar Guide / Craddle - Allis Chalmers CA, D10, D12 - Ki1107 70226658

    Allis-Chalmers CA, D10, D12 Drawbar Guide / Craddle

    Allis-Chalmers
    $157.50
    Ki1107
    Drawbar Guide / Craddle for Allis-Chalmers CA, D10, and D12 tractors.New part comes primered.Part Number: Ki1107FitsAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers D12Replaces / Cross Reference70226658226658NotesComes primered.
  • Allis-Chalmers FRONT WHEEL CLAMP LOCK NUT - AB-254D

    Front Wheel Clamp Lock Nut for Allis-Chalmers, Avery, Case, Ford, John Deere, Massey Ferguson

    Allis-Chalmers
    $24.25
    AB-254D
    Front wheel clamp lock nut for Allis-Chalmers and other listed tractor models.Check thread size before ordering. For axle shaft and front wheel applications with 3/4" - 16 NF thread. No re-threading necessary on worn shafts.Part Number:...
  • AGCO Timing Gear Cover Gasket Allis Chalmers D10 D12 D14 D15 70277268

    Allis Chalmers Timing Gear Cover Gasket | 70277268

    AGCO
    $13.75
    70277268
    Allis Chalmers Timing Gear Cover GasketPart Number: 70277268FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Replaces / Cross Reference70277268277268NotesCondition: New.
  • Allis-Chalmers TIRE 5.5x16 TRIPLE RIB 6 PLY

    Tire 5.50 x 16 Triple Rib 6 Ply for Allis-Chalmers

    Allis-Chalmers
    $104.75
    WH-047D
    Triple rib 6 ply tire sized 5.50 x 16. Fitment is listed for Allis-Chalmers and several other tractor brands.Part Number: WH-047DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey FergusonMassey HarrisMMOliverReplaces / Cross...
  • Allis-Chalmers Lower Generator Bracket B C CA D10 D12 D14, black metal engine part for tractor generator support.

    Allis Chalmers Lower Generator Bracket B C CA D10 D12 D14

    Allis-Chalmers
    $19.50
    AC-1913D
    Lower generator bracket for select Allis Chalmers tractors and the W226 power unit. Made in the USA with a bare finish.Part Number: AC-1913DFitsBCCAD10 up to SN 3500D12 up to SN 3000D14W226 Power unit, SN 96714 and upReplaces / Cross...
  • Allis-Chalmers Allis Chalmers Work Light / Taillight Bracket

    Allis Chalmers Work Light / Taillight Bracket for D17

    Allis-Chalmers
    $75.00
    DJS1211
    Part Number: DJS1211 Allis Chalmers Work Light / Taillight Bracket Bracket for the Allis Chalmers D17 Series I, II, and III. It can also be added to any D Series seat frame for use with Combo Light AC-355D. Fits Allis Chalmers D17 (Series I, II,...
  • Allis-Chalmers ALLIS CHALMERS D10 D12 Operating Instructions And Parts Illustrations Manual

    Allis-Chalmers D10 D12 Operating Instructions and Parts Illustrations Manual

    Allis-Chalmers
    $39.75
    MAN1012
    Allis-Chalmers D10 and D12 operating instructions and parts illustrations manual. Reprint. New condition.Part Number: MAN1012FitsAllis Chalmers D10 3501 & upAllis Chalmers D12 3001 & upSpecs108 pagesNotesOperators manual (reprint).Sometimes...