Same Day Shipping On 99% Of Orders

Allis Chalmers D14 Tractor Parts

About the Allis-Chalmers D14

The D14 opened the Allis-Chalmers D Series in 1957 as a new compact tractor for row-crop and general farm work. Its 149-cubic-inch four-cylinder engine was available for gasoline or LP gas, and the four-speed transmission could be paired with a transfer case for more gear choices. The D14 was equipped with the Power Director hand clutch, which gave the operator live PTO control without stopping the tractor.

Built through 1960, the D14 sits between the older CA and WD-era tractors and the D15 that followed it. The serial number table below can help identify the tractor's year.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left front end of the torque tube. The engine serial number is on the rear left-hand side of the engine, behind the carburetor.

The table below shows the beginning tractor serial number for each Model D14 year:

 

1957-1958
Model D14 year Beginning serial number
1957 1,001
1958 9,400
1959-1959
Model D14 year Beginning serial number
1959 14,900
1960-1960
Model D14 year Beginning serial number
1960 21,800

Total production: 23,050 Model D14 tractors.

Allis-Chalmers D14 Paint Reference

For restoration planning, the Allis-Chalmers D14 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D14 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers D Series 7/16 inch Snap-In Hole Plug 9563K84, metal hole plug with snap-in design for machinery maintenance and repair.

    Allis-Chalmers D Series 7/16" Snap-In Hole Plug 9563K84

    Allis-Chalmers
    $1.00
    9563K84
    Nickel-plated 7/16" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for headlight switch use.Part Number: 9563K84FitsAllis-Chalmers D Series TractorsSpecsSize: 7/16 inchNotesHeadlight...
  • A sediment bowl filter for Allis-Chalmers farm tractors, featuring a tall bowl assembly with a filter element inside. The filter has a metal body, a glass bowl for sediment collection, and a brass shut-off valve at the side. The image notes that the product is for illustrative purposes and the sediment bowl assembly is not included.

    Sediment Bowl Filter for Tall Bowl Assemblies

    Aftermarket
    $12.25
    DJS3039
    Fuel filter only. Sediment bowl not included. This fits our sediment bowl assembly ACR2406 and also fits replacement glass bowl
  • Allis-Chalmers Red Power Director Dash Oil Pressure Warning Light, a small automotive warning light with a red lens and metal mounting base.

    Allis Chalmers Red Power Director Dash Oil Pressure Warning Light

    Allis-Chalmers
    $39.50
    70240837-R
    Allis Chalmers - D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220Part Number: 70240837-RReplaces / Cross Reference70240837, 240837, 70240838, 240838NotesRed Power Director Dash...
  • Black-and-white seat-back cushion for an Allis-Chalmers farm tractor, with black vinyl side panels and a white center panel.

    Black & White Seat Back Cushion on Wood - Allis Chalmers

    Allis-Chalmers
    $78.00
    ACR0853
    Black & white vinyl seat back cushion on wood for listed Allis Chalmers models.Part Number: ACR0853FitsAllis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210,...
  • Allis-Chalmers Thru Hood Round Body Muffler Allis Chalmers B IB C CA D10 D12 D14 D15

    Allis Chalmers Thru Hood Round Body Muffler

    Allis-Chalmers
    $77.50
    ACR1049
    Thru hood round body muffler for Allis Chalmers tractors.Part Number: ACR1049FitsAllis Chalmers: B, IB, C, CA (1938-1957)Allis Chalmers: D10, D12, D14, D15 Gas (up to sn 9001)Replaces / Cross...
  • Front crankshaft seal for Allis-Chalmers D10, D12, D14, D15, and late WD45 farm tractors; a dark circular seal with a gray inner ring.

    Allis Chalmers Front Crankshaft Seal - D10, D12, D14, D15, Late WD45

    Allis-Chalmers
    $19.00
    70226620
    Allis Chalmers front crankshaft seal for the listed D10, D12, D14, D15, and Late WD45 applications.Part Number: 70226620FitsD10D12D14D15 (up to 9001; 138 & 149 CID Gas)WD45 engine # 45-16650 &...
  • Allis-Chalmers Persian Orange #2 Allis Chalmers Steering Wheel Emblem Front Nose Emblem

    Allis-Chalmers Persian Orange #2 Emblem

    Allis-Chalmers
    $34.00
    A9902
    Persian Orange #2 emblem for select Allis-Chalmers tractors, combines, and lawn and garden models.Part Number: A9902FitsAllis Chalmers: ED40, D10, D12, D14 (sn 19001 and up), D15, D17 (sn 24001 and...
  • Allis-Chalmers Raincap 1 3/4" - 1 15/16" I.D.

    Allis-Chalmers Raincap 1 3/4" - 1 15/16" I.D.

    Allis-Chalmers
    $12.50
    ACR1799
    Part Number: ACR1799Allis-Chalmers RaincapRaincap with a 1 3/4" - 1 15/16" I.D. for the listed applications.FitsAllis ChalmersCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonOliver
  • Allis-Chalmers Ignition Switch 4 Position Key Switch

    4 Position Ignition Switch with 2 Keys

    Allis-Chalmers
    $19.75
    AB-400D
    4-position ignition switch for AG and light industrial equipment.Includes 2 keys.Part Number: AB-400DFitsAllis ChalmersAveryCaseCockshuttDavid BrownFordIH / FarmallJohn DeereMassey FergusonMassey...
  • Allis-Chalmers Allis Chalmers Throttle Quadrant, Governor Control BUSHING 70222447

    Allis Chalmers Steering Shaft Bushing Governor Control Bushing

    Allis-Chalmers
    $19.75
    AC-225D
    Allis Chalmers steering shaft bushing / governor control bushing.Used as lower steering shaft support bushing on D19.Part Number: AC-225DFitsAllis Chalmers D14Allis Chalmers D15Allis Chalmers D17...
  • Allis-Chalmers 12 Volt Bullet Tail Light, compact silver and red automotive lighting with mounting bolt and wiring for tractor or vehicle tail light.

    Allis-Chalmers 12 Volt Bullet Tail Light

    Allis-Chalmers
    $47.75
    AC-264V12D
    12 volt bullet tail light for select Allis-Chalmers tractors. It includes a 12-volt bulb and a red glass lens.Part Number: AC-264V12DFitsAllis Chalmers: B, C, CA, G, WD, WD45, D10 (up to sn 9001),...
  • Allis-Chalmers Allis Chalmers Black Steering Wheel ED40 D10 D12 D14 D15 D17 D19 D21

    Allis Chalmers Black Steering Wheel

    Allis-Chalmers
    $57.50
    AC-134D
    Black steering wheel for listed Allis-Chalmers tractors and combines. Like original and made with all new material.Part Number: AC-134DFitsAllis Chalmers - ED40, D10, D12, D14 (sn 19001 and up), D15,...
  • Allis-Chalmers 4-3/4 Smooth Glass Lens w/Guide Name

    4-3/4" Smooth Glass Lens with Guide Name

    Allis-Chalmers
    $15.50
    AB-388D
    4-3/4" smooth glass lens with a raised guide logo and raised part number cross reference abc388.Part Number: AB-388DFitsAllis Chalmers: B, IB, C, CA, D10, D12, D14, D15 (up to SN 9001), WC, WD, WD45,...
  • Allis-Chalmers Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey, representing a shiny, round metal fuel cap with a textured edge.

    Chrome Fuel Cap for Allis Chalmers, Case, Ford, JD, Massey

    Allis-Chalmers
    $13.00
    AB-003D
    Chrome fuel cap with gasket and vented design for the listed tractor applications.Part Number: AB-003DFitsAllis Chalmers: D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, I-40, I-400, I-60, I-600;...
  • Allis-Chalmers Thermostat 160 Degrees for Allis-Chalmers and More, gold-colored thermostatic valve with a conical top and circular base.

    Thermostat 160 Degrees for Allis-Chalmers and More

    Allis-Chalmers
    $39.75
    IH-913D
    Thermostat 160 degrees with a 2.600" length and 2.510" flange diameter.Fits the listed tractor applications below.Part Number: IH-913DFitsAllis Chalmers: B (Engine SN: 126210 & up when equipped with...
  • A black tension spring for an Allis-Chalmers tractor, with a tightly coiled section, a short curved hook at the left end, and a long straight extension ending in a larger hook at the right. Product 70228219.

    Allis Chalmers Hydraulic / Throttle Control Lever Spring 70228219

    Allis-Chalmers
    $19.95
    70228219
    Allis Chalmers hydraulic / throttle control lever spring for D14, D15, D17, and D19.Part Number: 70228219FitsD14D15D17D19Replaces / Cross Reference70228219NotesUsed on hydraulic and throttle levers.
  • Close-up of a dark metal Allis-Chalmers farm tractor clutch throw-out bearing, a circular component with a wide outer ring and open center, on a white background.

    Clutch Throw Out Bearing (IH Torque Amplifier Release Bearing)

    Allis-Chalmers
    $22.00
    AB-496D
    Clutch throw out bearing, also listed as an IH torque amplifier release bearing. Includes size details and cross references.Part Number: AB-496DFitsAllis Chalmers - 190XT, B, C, CA (W/ 9" Clutch),...
  • Allis-Chalmers INSTRUMENT PANEL GAUGE TRIM Allis Chalmers D14 D15 D17 D19

    Instrument Panel Gauge Trim for Allis-Chalmers D14 D15 D17 D19

    Allis-Chalmers
    $39.75
    DJS353
    Instrument panel gauge trim for Allis-Chalmers D14, D15, D17, and D19. USA made and finished in brushed stainless steel.Part Number: DJS353FitsD14D15D17D19Replaces / Cross...