Same Day Shipping On 99% Of Orders

Allis Chalmers D15 Tractor Parts

About the Allis-Chalmers D15

The D15 replaced the D14 in 1960 and carried the compact D Series design into the 1960s. Early D15 tractors used a four-cylinder engine available in gasoline, LP gas, or diesel versions, with more power and an eight-speed transmission option.

There are two main versions to keep in mind: Series I was built from 1960 through 1962, and Series II from 1963 through 1968. Series II tractors received larger gas and LP engines, a dry air cleaner, headlights moved to the rear fenders, and updated hood decals. These changes are why the model year and serial number should be checked before ordering a D15 part.

Serial Number Reference

Serial number locations: On Series I tractors, the tractor serial number is stamped at the left front end of the torque housing. The gasoline engine serial number is on the rear left-hand side behind the carburetor, and the diesel engine serial number is on the top left-hand side of the engine block. On Series II tractors, the tractor serial number is stamped into the flange where the engine and transmission meet on the left side; gasoline engine numbers are at the rear left-hand side near the carburetor, and diesel numbers are on the top left-hand side of the cylinder block.

The table below shows the beginning tractor serial number for each Model D15 year and series:

 

1960-1962
Model D15 year Beginning serial number
1960 - Series I 1,001
1961 - Series I 1,900
1962 - Series I 6,470
1963-1965
Model D15 year Beginning serial number
1963 - Series II 13,001
1964 - Series II 16,928
1965 - Series II 19,681
1966-1968
Model D15 year Beginning serial number
1966 - Series II 21,375
1967 - Series II 23,734
1968 - Series II 25,127

Total production: 7,169 Model D15 tractors: 6,212 gas/LP and 957 diesel.

Allis-Chalmers D15 Paint Reference

For restoration planning, the Allis-Chalmers D15 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D15 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Tie Rod Boot FD-337D, black rubber protective cover for tie rod.

    Allis-Chalmers Tie Rod Boot FD-337D

    Allis-Chalmers
    $4.95
    FD-337D
    OverviewUniversal tie rod boot FD-337D for Allis-Chalmers and other tractor applications. This black rubber protective boot is listed with multiple brand and model fitments...
  • Two brass fuel line adapter fittings with threaded ends, designed for Allis-Chalmers farm tractors, not made for automobiles.

    Fuel Line Adapter Fitting

    Allis-Chalmers
    $5.00
    AB-4285D
    Fuel Line Adapter Fitting for tractors and equipment using 5/16" fuel line.Part Number: AB-4285DFitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsInternational :...
  • Black, glossy, spherical Allis-Chalmers hydraulic lever brake release knob, shown alone against a white background.

    Allis-Chalmers Hydraulic Lever Brake Release Knob

    Allis-Chalmers
    $5.75
    K21
    Hydraulic lever brake release knob for Allis-Chalmers equipment. Fits various models.Part Number: K21FitsAllis-Chalmers - fits various modelsSpecs3/8" - 24" thread1-3/8" diameter
  • Allis-Chalmers Electrical Outlet Socket, metallic electrical outlet with mounting base and screw terminals for device connection.

    Electrical Outlet Socket

    Allis-Chalmers
    $32.75
    AB-395D
    2-pin electrical outlet socket for ALL implements with lights. Fits Allis-Chalmers, Avery, Case, Cockshutt, Ford, IH / Farmall, John Deere, Massey Ferguson, Massey Harris, MM, and Oliver applications...
  • Allis-Chalmers Cast Rocker Arm Support Stand for D10, D12, D14, D15 models, black metal tractor engine component.

    Cast Rocker Arm Support Stand Allis Chalmers D10 D12 D14 D15

    Allis-Chalmers
    $37.75
    AC-1196D
    Cast rocker arm support stand for Allis Chalmers gas and LP models. Sold individually, 4 used per tractor.Part Number: AC-1196DFitsAllis Chalmers Gas / LP - D10, D12, D14, D15, I40, I60, I400, I600,...
  • Round Allis-Chalmers farm tractor voltage meter with a black dial marked 8–16 volts, white needle near 8, red warning zones, and a chrome bezel.

    Voltage Meter 8 to 16 Volt

    Allis-Chalmers
    $32.75
    VOLT12LT
    Voltage meter with 8 to 16 volt range and illuminated dial.Part Number: VOLT12LTFitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational - variousJohn Deere -...
  • Allis-Chalmers Oil Fill Breather Cap Without Clip, close-up of the black metal breather cap showing its internal structure and vent holes.

    Oil Fill Breather Cap Without Clip

    Allis-Chalmers
    $42.50
    AC-178D
    Oil fill breather cap without clip. Includes a copper filter element, has "OIL" stamped into the top, and is e-coated in black. Made in the USA.Part Number: AC-178DFitsAllis-Chalmers BAllis-Chalmers...
  • Allis-Chalmers 7/8 inch Snap-In Hole Plug, Nickel Plated, 9563K46, image showing front and back views of the nickel-plated metal hole plug with a serrated interior for secure fit.

    Allis-Chalmers 7/8" Snap-In Hole Plug, Nickel Plated - 9563K46

    Allis-Chalmers
    $1.50
    9563K46
    OverviewNickel plated 7/8" snap-in hole plug for Allis-Chalmers D Series tractors and cigarette lighter openings. Part Number: 9563K46.FitsAllis-Chalmers D Series tractorsCigarette lighter...
  • Allis-Chalmers Viton Needle Float Valve Allis Chalmers Marvel Schebler B C CA D14 D15 G IB RC WC WD WF 70244912

    Viton Needle Float Valve Allis Chalmers Marvel Schebler

    Allis-Chalmers
    $8.00
    AB-230D
    Viton needle float valve for Marvel Schebler carburetors.Viton needle and seat helps stop carb flooding. The orifice measures .070" diameter and the thread is 3/8"-27.Part Number: AB-230DFitsAllis...
  • Allis-Chalmers 4.25 X 16 Front Wheel 5 Hole

    4.25 x 16 Front Wheel 5 Hole for Allis-Chalmers, Cockshutt, Massey Harris

    Allis-Chalmers
    $199.75
    AC-009D
    4.25 x 16 front wheel, 5 hole with listed applications below.Not For tubeless applications. Not recommended for tractors with loaders.Part Number: AC-009DFitsAllis Chalmers: D17, D15, D14 (Early w/ 5...
  • A metallic flexible choke cable with a round black knob at one end, labeled 'CHOKE,' designed for Allis-Chalmers farm tractors.

    Universal Choke Cable 64"

    Allis-Chalmers
    $19.75
    AC-17033019
    Universal Choke Cable with 64" metal sheathed cable length.Part Number: AC-17033019FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousIH / Farmall - Hydro 70, Hydro 86, 300,...
  • Close-up product photo of a black 12-volt, 3-post saddle-mount starter solenoid for an Allis-Chalmers farm tractor. It has two large copper threaded terminals, a smaller control terminal, and metal mounting tabs; labels read “12V” and “733 102.”

    Starter Solenoid 3 Post Saddle Mount 12 Volt

    Allis-Chalmers
    $31.25
    DR1467
    3 post saddle mount starter solenoid for 12 volt systems only. Fits multiple Allis-Chalmers, Case, Cockshutt, International, John Deere, Massey Ferguson, Minneapolis Moline, Oliver, and White...
  • Allis-Chalmers I&T Shop Service Manual, front cover with tractor illustration and descriptive text.

    Allis Chalmers I&T Shop Service Manual

    Allis-Chalmers
    $41.75
    AC-201M
    Allis Chalmers I&T Shop Service ManualAuthentic tractor manual with information for repairs, restoration, specifications, torques, exploded views, and photos. Offers useful shortcuts that may save...
  • Allis-Chalmers Valve Grind Head Gasket Set, engine gasket kit with various gaskets including head gasket, valve seal, and other engine seals for Allis Chalmers D10, D12, D14, D15, H3.

    Allis-Chalmers Valve Grind Head Gasket Set AC-1658D

    Allis-Chalmers
    $49.75
    AC-1658D
    Allis-Chalmers Valve Grind Head Gasket SetPart Number: AC-1658DThis valve grind head gasket set is listed for the Allis-Chalmers tractor and crawler applications below.FitsAllis Chalmers: D10, D12,...
  • One-quart can of Northern Fuel Tank Liner, a gas tank sealer for Allis-Chalmers farm tractors. The can has a blue-and-white label with yellow lettering and a silver metal lid.

    Gas Tank Sealer - 1 Quart Can

    Allis-Chalmers
    $69.99
    ACR2043
    Gas tank sealer in a 1 quart can.Part Number: ACR2043FitsAllis-Chalmers - VariousCase - VariousCockshutt - VariousFord - VariousInternational - VariousJohn Deere - VariousMassey Ferguson -...
  • A brass bushing for Allis-Chalmers farm tractors, specifically the Front Governor Shaft Bushing for models B, C, CA, D10, D12, D14, D15.

    Allis-Chalmers Front Governor Shaft Bushing B C CA D10 D12 D14 D15

    Allis-Chalmers
    $14.75
    AC-3739D
    Front Governor Shaft Bushing for Allis-Chalmers tractors and combines.Part Number: AC-3739DFitsAll the following gas and LP tractors: B, C, CA, D10, D12, D14, D15, D272, IB, RCAllis Chalmers Combines...
  • Allis-Chalmers Delco Distributor Cap Spring Clip With Longer Bracket, automotive ignition distributor part with metal clip, bracket, and screw for engine ignition system repair.

    Delco Distributor Cap Spring Clip With Longer Bracket

    Allis-Chalmers
    $15.00
    AB-488LD
    Part Number: AB-488LDProduct OverviewDistributor cap spring clip with a 1" long bracket, one screw, and two washers. Longer bracket than the bracket in ABC488S.FitsAllis Chalmers: B, IB, C, CA, G,...
  • A set of spark plug wires designed for Allis-Chalmers farm tractors, specifically models D10, D12, D14, D15, and D17.

    Allis Chalmers D10 D12 D14 D15 D17 Spark Plug Wire Set

    Allis-Chalmers
    $33.25
    DJS1005
    Original-style spark plug wire set for Allis Chalmers D10, D12, D14, D15, and D17 tractors.Made and assembled in the USA to original length and style with original style boots.Part Number:...