Same Day Shipping On 99% Of Orders

Allis Chalmers D15 Tractor Parts

About the Allis-Chalmers D15

The D15 replaced the D14 in 1960 and carried the compact D Series design into the 1960s. Early D15 tractors used a four-cylinder engine available in gasoline, LP gas, or diesel versions, with more power and an eight-speed transmission option.

There are two main versions to keep in mind: Series I was built from 1960 through 1962, and Series II from 1963 through 1968. Series II tractors received larger gas and LP engines, a dry air cleaner, headlights moved to the rear fenders, and updated hood decals. These changes are why the model year and serial number should be checked before ordering a D15 part.

Serial Number Reference

Serial number locations: On Series I tractors, the tractor serial number is stamped at the left front end of the torque housing. The gasoline engine serial number is on the rear left-hand side behind the carburetor, and the diesel engine serial number is on the top left-hand side of the engine block. On Series II tractors, the tractor serial number is stamped into the flange where the engine and transmission meet on the left side; gasoline engine numbers are at the rear left-hand side near the carburetor, and diesel numbers are on the top left-hand side of the cylinder block.

The table below shows the beginning tractor serial number for each Model D15 year and series:

 

1960-1962
Model D15 year Beginning serial number
1960 - Series I 1,001
1961 - Series I 1,900
1962 - Series I 6,470
1963-1965
Model D15 year Beginning serial number
1963 - Series II 13,001
1964 - Series II 16,928
1965 - Series II 19,681
1966-1968
Model D15 year Beginning serial number
1966 - Series II 21,375
1967 - Series II 23,734
1968 - Series II 25,127

Total production: 7,169 Model D15 tractors: 6,212 gas/LP and 957 diesel.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Valve Grind Head Gasket Set, engine gasket kit with various gaskets including head gasket, valve seal, and other engine seals for Allis Chalmers D10, D12, D14, D15, H3.

    Allis-Chalmers Valve Grind Head Gasket Set AC-1658D

    Allis-Chalmers
    $49.75
    AC-1658D
    Allis-Chalmers Valve Grind Head Gasket SetPart Number: AC-1658DThis valve grind head gasket set is listed for the Allis-Chalmers tractor and crawler applications below.FitsAllis Chalmers: D10, D12,...
    Add to Cart
  • Allis-Chalmers Starter Solenoid 3 Post Saddle Mount 12 Volt, electrical starter solenoid with black body, metal mounting bracket, and copper terminal posts for connecting wires.

    Starter Solenoid 3 Post Saddle Mount 12 Volt

    Allis-Chalmers
    $31.25
    DR1467
    3 post saddle mount starter solenoid for 12 volt systems only. Fits multiple Allis-Chalmers, Case, Cockshutt, International, John Deere, Massey Ferguson, Minneapolis Moline, Oliver, and White...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Spark Plug Wire Set D10 D12 D14 D15 D17 (Original Style)

    Allis Chalmers D10 D12 D14 D15 D17 Spark Plug Wire Set

    Allis-Chalmers
    $33.25
    DJS1005
    Original-style spark plug wire set for Allis Chalmers D10, D12, D14, D15, and D17 tractors.Made and assembled in the USA to original length and style with original style boots.Part Number:...
    Add to Cart
  • Allis-Chalmers Zenith Carburetor Float - AB-190D

    Zenith Carburetor Float

    Allis-Chalmers
    $16.75
    AB-190D
    Zenith carburetor float for listed applications. Verify your carburetor manufacturer number before ordering.Part Number: AB-190DFitsAllis Chalmers: B, IB, C, CA, WF, RC w/ zenith 9492 or 9507, WC,...
    Add to Cart
  • Allis-Chalmers 1/2 inch Snap-In Hole Plug, Nickel Plated, with one view showing the plug's interior and the other showing the smooth exterior surface.

    Allis-Chalmers 1/2" Snap-In Hole Plug, Nickel Plated

    Allis-Chalmers
    $1.00
    9563K43
    Part Number: 9563K43Product Overview1/2 inch snap-in hole plug with a nickel plated finish for Allis-Chalmers D Series tractors. Intended for belt pulley rod or knob holes.FitsAllis-Chalmers D Series...
    Add to Cart
  • Allis-Chalmers Sleeve Sealing O Rings for D10, D12, D14, D15, H3, I40, round black rubber sealing rings for machinery.

    Allis-Chalmers Sleeve Sealing O Rings for D10, D12, D14, D15, H3, I40

    Allis-Chalmers
    $8.25
    AC-2109D
    Allis-Chalmers Sleeve Sealing O Rings for 1 cylinder applications.Use with the model and serial details listed below. Replacement for 227563 and 70227563.Part Number: AC-2109DFitsD10D12D14D15 — up to...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Governor Gear Bushing B C CA D10 D12 D14 D15 IB RC

    Allis-Chalmers Governor Gear Bushing B C CA D10 D12 D14 D15

    Allis-Chalmers
    $19.75
    AC-3733D
    Governor Gear Bushing for Allis-Chalmers tractors and combines.Part Number: AC-3733DFitsAll gas and LP tractors: B, C, CA, IB, RC, D10, D12, D14, D15, D272Allis Chalmers Combines - 60, 60A, 60H, 66,...
    Add to Cart
  • Allis-Chalmers Allis Chalmers D10 D12 D15 Fan Belt | 70233432

    Allis Chalmers D10 D12 D15 Fan Belt | 70233432

    Allis-Chalmers
    $14.75
    70233432
    Fan Belt for Allis Chalmers D10, D12, and D15For D10, D12 with fixed water pump pulley, and D15 Gas or LP models.Part Number: 70233432FitsD10D12 with fixed water pump pulleyD15 Gas or LP
    Add to Cart
  • Allis-Chalmers Upper Radiator Hose Allis Chalmers D15 | 70233430

    Allis Chalmers D15 Upper Radiator Hose | 70233430

    Allis-Chalmers
    $18.00
    70233430
    Upper radiator hose for Allis Chalmers D15 tractors. Listed as replacement number 70233430 with short number 233430.Part Number: 70233430FitsAllis Chalmers D15Replaces / Cross...
    Add to Cart
  • Allis-Chalmers 6-inch Battery Cable, heavy-duty braided silver cable with metal terminal end for automotive battery connections.

    6" Battery Cable

    Allis-Chalmers
    $15.75
    AB-401D
    6" ground battery cable, non-insulated, 2 gauge, with heavy duty straight terminals.Part Number: AB-401DFitsAllis Chalmers - D14 (Ground strap), D17 (Ground Strap on Diesel up to SN: 38963 and All...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Amp Gauge (60-0-60) - D10-D21 170-220 70254407 254407

    Allis Chalmers Amp Gauge 60-0-60 70254407

    Allis-Chalmers
    $44.50
    DJS70254407
    Aftermarket 60-0-60 gauge made just like the original ones that came on the tractor when new. Made to give it that original look.Part Number: DJS70254407FitsAllis Chalmers D10Allis Chalmers D12Allis...
    Add to Cart
  • Allis-Chalmers Tie Rod Boot - JD-736D, black rubber automotive part with a wide base and a hollow cylindrical opening.

    Tie Rod Boot JD-736D

    Allis-Chalmers
    $4.95
    JD-736D
    Tie Rod Boot JD-736DNew tie rod boot with the dimensions listed below. Review the fitment and replacement numbers carefully before ordering.FitsListed fitment includes:Allis...
    Add to Cart
  • Allis-Chalmers STEP Allis Chalmers D10 D12 D14 D15

    Allis Chalmers D10 D12 D14 D15 Step

    Allis-Chalmers
    $98.75
    DJS1172D
    Aftermarket step for Allis Chalmers D10, D12, D14, and D15 tractors. It attaches to the existing holes on the platform.Part Number: DJS1172DFitsAllis Chalmers - D10, D12, D14, D15NotesSleek black...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Tachometer Drive Adapter D10 D12 D14 D15 D17 70228768

    Allis Chalmers Tachometer Drive Adapter 70228768

    Allis-Chalmers
    $18.75
    AC-1915D
    Tachometer drive adapter for select Allis Chalmers tractors and industrial models. Use with item # AC-1912D.Part Number: AC-1915DFitsI40I400I60D10D12D14D15 (Gas/LP)D17 (Gas/LP)Backhoe: 615I600...
    Add to Cart
  • Allis-Chalmers Black Tractor Seat Pad Cushion 19"

    Black Tractor Seat Pad Cushion 19"

    Allis-Chalmers
    $39.50
    YF30BLK
    This black tractor seat pad cushion is for tractors with a round pan seat. It fits a 19" to 21" seat pan side to side and uses a drawstring attachment.Part Number: YF30BLKFitsAllis Chalmers - B, C,...
    Add to Cart
  • Allis-Chalmers Allis Chalmers D15 D17 D19 Instrument Panel Trim

    Allis-Chalmers D15 D17 D19 Instrument Panel Trim

    Allis-Chalmers
    $78.75
    AC-353D
    Stainless steel instrument panel trim with a 1/2" swirl, machine turned design.Part Number: AC-353DFitsAllis Chalmers D19Allis Chalmers D17 (SN: 32001 - 75000)Allis Chalmers D15 (SN: 9001 &...
    Add to Cart
  • Allis-Chalmers 11/16 inch Snap-In Hole Plug Nickel Plated Allis Chalmers D Series, product image showing the plug's internal and external views.

    11/16" Snap-In Hole Plug Nickel Plated Allis Chalmers D Series

    Allis-Chalmers
    $1.25
    9563K61
    11/16 inch snap-in hole plug for Allis Chalmers D Series tractors. Nickel plated and described for push button start, fuse holder, and dash light use.Part Number: 9563K61FitsAllis Chalmers D Series...
    Add to Cart
  • Allis-Chalmers Allis Chalmers D15 Carburetor to Air Cleaner Hose 233682 70233682

    Allis-Chalmers D15 Carburetor to Air Cleaner Hose

    Allis-Chalmers
    $25.75
    70233682
    Carburetor to air cleaner hose for Allis-Chalmers D15. Rubber hose replacement with the numbers listed below.Part Number: 70233682FitsAllis-Chalmers D15Replaces / Cross...
    Add to Cart