Same Day Shipping On 99% Of Orders

Allis Chalmers 175 Tractor Parts

About the Allis-Chalmers 175

The Allis-Chalmers 175 arrived in 1970 as a larger member of the company's Hundred series. It used a four-cylinder engine, live PTO, hydrostatic power steering, and an eight-speed partial power-shift transmission for field work.

The 175 was available with gasoline or diesel power through 1980. The early Perkins diesel was used through serial number 1458, and the larger 4.248 diesel began at serial number 1459. That change makes the serial number especially useful when checking diesel engine parts.

Serial Number Reference

Serial number locations: The tractor serial number is on the left front side of the torque housing. The gasoline engine serial number is on the left side of the cylinder block behind the carburetor. A diesel engine serial number may be on the front right side of the cylinder block near the alternator or on the front left side above the injection pump.

The table below shows the beginning tractor serial number for each Model 175 year:

 

1970-1973
Model 175 year Beginning serial number
1970 1,001
1971 1,477
1972 1,624
1973 1,740
1974-1977
Model 175 year Beginning serial number
1974 2,153
1975 3,255
1976 3,754
1977 4,809
1978-1980
Model 175 year Beginning serial number
1978 5,670
1979 6,321
1980 6,999

Total production: 6,494 Model 175 tractors: 5,485 diesel and 1,009 gasoline.

Allis-Chalmers 175 Paint Reference

For restoration planning, the Allis-Chalmers 175 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers 175 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1961 through 1977 Persian Orange 2 Cream Cream, Aluminum Persian Orange 2 Persian Orange 2

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers tractor seat rod hardware kit displayed on a white background, with two bronze-colored round washers, six split roll pins, and two silver three-pronged retaining clips.

    Allis Chalmers Seat Rod Hardware Kit

    Allis-Chalmers
    $12.75
    SEAT001
    Allis Chalmers seat rod hardware kit for select tractor models. Includes stainless washers, split retaining rings, and stainless roll pins.Part Number:...
  • Allis-Chalmers tractor water pump with a dark cast-metal housing, round pulley hub with four threaded holes, and a separate mounting gasket, for D17, 170, and 175 farm tractors.

    Water Pump for Allis-Chalmers D17, 170, 175

    Allis-Chalmers
    $118.75
    AC-2799D
    Water pump for Allis-Chalmers D17, 170, and 175 with late 226 cubic inch gas and LP engines.Includes fixed cast iron pulley, backing plate, and gasket.Part Number: AC-2799DFitsAllis Chalmers - D17,...
  • Long orange metal toolbox with a hinged lid and front latch, for Allis-Chalmers D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 210, and 220 farm tractors. Shown against a white background.

    Toolbox for Allis-Chalmers D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 210, 220

    Allis-Chalmers
    $59.75
    AC-144D
    Toolbox for Allis-Chalmers D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 210, and 220 models.Part Number: AC-144DFitsAllis Chalmers - D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 210, 220Replaces...
  • Tachometer drive gear assembly for Allis-Chalmers farm tractors, shown with a black oval housing, brass mounting plate, black fitting, and two screws. Fits models 190, 190XT, 200, 210, and 220.

    Tachometer Tach Drive Gear Assembly for Allis-Chalmers 190, 190XT, 200, 210, 220

    Allis-Chalmers
    $44.00
    70246764-A
    Tachometer Tach Drive Gear Assembly for Allis-Chalmers tractors with generator or alternator driven tachometer.Part Number: 70246764-AFitsAllis Chalmers - D21, 170, 175, 180, 185, 190, 190XT, 200,...
  • Allis-Chalmers farm tractor cap screw bolt and rectangular block, part 70202132. The long threaded screw has a slotted head and tapered end; the flat block has a central hole.

    Allis-Chalmers Cap Screw Bolt & Block 70202132

    Allis-Chalmers
    $13.75
    70202132 (009)
    Cap screw, bolt, and block for fuel tank and radiator straps. Sold individually and supplied as 1 screw and 1 mounting block.Part Number: 70202132 (009)FitsAllis Chalmers - D10, D12, D14, D15, D17,...
  • Allis-Chalmers tractor cap screw and rectangular block, part number 70202132. The long threaded screw has a tapered end and slotted head; the flat block has a centered hole.

    Allis-Chalmers Cap Screw Bolt & Block 70202132

    Allis-Chalmers
    $13.75
    70202132
    Cap screw, bolt, and block for fuel tank and radiator straps. Sold individually and supplied as 1 screw and 1 mounting block.Part Number: 70202132FitsAllis Chalmers - B (prior to SN B-58401), IB, C,...
  • Allis-Chalmers farm tractor tachometer drive gear assembly kit, with black housing, threaded drive, separate gear, two screws, and gasket, shown on a white background.

    Allis-Chalmers Tachometer Drive Gear Assembly

    Allis-Chalmers
    $44.00
    70246764-B
    Tachometer drive gear assembly for the listed applications below. Note: 70246764-B is made for Aftermarket AlternatorsPart Number: 70246764-BFitsAllis Chalmers - D21, 170, 175, 180, 185, 190, 190XT,...
  • Allis-Chalmers Clutch Throw Out Bearing, a metallic automotive clutch component.

    Allis-Chalmers Clutch Throw Out Bearing

    Allis-Chalmers
    $24.75
    AB-2501D
    Sealed bearing, no need to grease. Use the fitment and cross references below to confirm application.Part Number: AB-2501DFitsAllis Chalmers - D17 (SN: 75001 and up), 170, 175, 210, 220, 7000Case -...
  • Allis-Chalmers Carburetor Gasket Kit for Big Bowl Marvel Scheblers, featuring several gasket parts and small O-rings for carburetor repair.

    Carburetor Gasket Kit for Big Bowl Marvel Scheblers

    Allis-Chalmers
    $6.75
    AB-2275D
    Carburetor gasket kit for Big Bowl Marvel Scheblers applications across multiple tractor brands.Part Number: AB-2275DFitsAllis Chalmers: 170, 175, 180, 185 (D Grader), D15, D17, WD45Case: 530, 531,...
  • Allis-Chalmers Choke or Fuel Shut Off Cable Clip, metallic hardware part used for engine control cable management.

    Choke or Fuel Shut Off Cable Clip

    Allis-Chalmers
    $6.75
    AB-2426D
    Choke or fuel shut off cable clip for listed Allis-Chalmers, Avery, Case, International, and John Deere applications.Part Number: AB-2426DFitsAC Combines - Industrial: 60 (for choke cable bracket...
  • Allis-Chalmers 2-Piece Rear Crankshaft Main Seal, black gasket ring for Allis Chalmers 170 175 D17 tractor.

    2-Piece Rear Crankshaft Main Seal - Allis Chalmers 170 175 D17

    Allis-Chalmers
    $11.75
    AC-2388D
    2-piece rear crankshaft main seal for the listed Allis Chalmers and other applications.Part Number: AC-2388DFitsAllis Chalmers: 170, 175, D17 (with 226" gas/LP)Combines: E, E3, K (with 226"...
  • Two gray semicircular Allis-Chalmers connecting rod bearing shells, .020-inch undersize, shown on a white background for D17, WD, WD45, 170, 175, WC, and WF farm tractors.

    Connecting Rod Bearing .020 Undersize for Allis-Chalmers D17, WD, WD45, 170, 175, WC, WF

    Allis-Chalmers
    $15.00
    AC-2562D
    Connecting rod bearing .020" undersize for the Allis-Chalmers applications listed below. Sold per journal.Part Number: AC-2562DFitsAllis Chalmers D17, WD, WD45, 170, 175 (gas, LP with G201, G226...
  • Two curved metal connecting rod bearing shells for Allis-Chalmers farm tractors, shown separately against a white background.

    Connecting Rod Bearing .010 Undersize for Allis-Chalmers D17, WD, WD45, 170, 175, WC, WF

    Allis-Chalmers
    $15.75
    AC-2493D
    Connecting rod bearing .010 undersize for the Allis-Chalmers applications listed below. Sold per journal.Part Number: AC-2493DFitsAllis Chalmers D17, WD, WD45, 170, 175 (Gas, LP with G201, G226...
  • Two silver-gray halves of a standard connecting rod bearing for Allis-Chalmers farm tractors, shown separated and curved into open semicircles.

    Standard Connecting Rod Bearing for Allis-Chalmers D17, WD, WD45, 170, 175, WC, WF

    Allis-Chalmers
    $14.25
    AC-2490D
    Standard connecting rod bearing for Allis-Chalmers applications listed below. Sold per journal.Part Number: AC-2490DFitsAllis Chalmers D17, WD, WD45, 170, 175 (gas, LP with G201, G226 engines)Allis...
  • A single long, black Allis-Chalmers tractor engine pushrod with a narrow cylindrical shaft and a wider rounded cap at one end, shown diagonally on a white background.

    Pushrod for Allis-Chalmers D17, WC, WD, WD45, WF, 170, 175

    Allis-Chalmers
    $29.75
    AC-2415D
    Pushrod sold individually for Allis-Chalmers D17, WC, WD, WD45, WF, 170, 175.Also used on Combines, Cotton Pickers, Motor Graders, Loaders, Speed Patrol, and Power Units listed below.Part Number:...
  • Two black sleeve-sealing O-rings for Allis-Chalmers WD, WD45, WF, WC, D17, 170, and 175 farm tractors, overlapping on a white background.

    Allis-Chalmers Sleeve Sealing O Rings for WD, WD45, WF, WC, D17, 170, 175

    Allis-Chalmers
    $8.25
    AC-2113D
    Allis-Chalmers Sleeve Sealing O Rings for 1 cylinder applications.Fits the models and engine applications listed below. Replacement for 70207436 and 70227500.Part Number: AC-2113DFits170175D17WC — SN...
  • Allis-Chalmers 4-cylinder tractor piston ring set, with 16 dark metal rings arranged in four columns of four on a white background.

    Allis-Chalmers Piston Ring Set 4-Cylinder

    Allis-Chalmers
    $79.75
    AB-2090D
    Part Number: AB-2090DAllis-Chalmers Piston Ring SetFor select Allis-Chalmers, Case, and International 4-cylinder applications. Measure old rings before ordering to confirm the correct set.FitsAllis...
  • Illustrative image of assorted dark and silver piston rings arranged in several overlapping stacks. Text on image reads “FOR ILLUSTRATIVE PURPOSES ONLY.” Product: Allis-Chalmers four-cylinder piston ring set for some 170, 175, D17, WC, WD, WD45, and WF farm tractors.

    Allis-Chalmers Piston Ring Set 4-Cylinder SOME 170, 175, D17, WC, WD, WD45, WF

    Allis-Chalmers
    $146.75
    AB-2082D
    Part Number: AB-2082DAllis-Chalmers Piston Ring SetFor select Allis-Chalmers, Case, International, and Massey Harris applications with 4" bore. Includes the listed compression and oil ring dimensions...