Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers Battery Cable 9" Non-Insulated Ground Cable AB-411D, a braided metal ground cable with a ring terminal at one end for battery connections.

    Battery Cable 9" Non-Insulated Ground Cable AB-411D

    Allis-Chalmers
    $18.75
    AB-411D
    Battery Cable 9" Non-Insulated Ground CableHeavy-duty 2 gauge battery cable with straight terminals. This 9" non-insulated ground cable is listed for select tractor applications.FitsAllis Chalmers -...
  • Red Allis-Chalmers hydraulic and transmission oil dipstick cap with a flat metal dipstick extending to the right, shown on a white background.

    Allis-Chalmers Hydraulic and Transmission Oil Dipstick Cap

    Allis-Chalmers
    $27.75
    AC-302D
    Hydraulic and transmission oil dipstick cap for select Allis-Chalmers tractors.Cap and dipstick all in one.Part Number: AC-302DFitsCAWDWD45D10D12Replaces / Cross Reference70224611acs302
  • Rectangular metal grill screen with a dark frame and fine horizontal mesh for Allis-Chalmers D10, D12, D14, D15, D17, and D19 farm tractors.

    Grill Screen for Allis-Chalmers D10 D12 D14 D15 D17 D19

    Allis-Chalmers
    $87.50
    ATC9918
    Grill screen for Allis-Chalmers D Series tractors. Can be used for replacing 100 and 200 Series grill screens.Part Number: ATC9918FitsAllis Chalmers: D Series (Late), D10, D12, D14, D15, D17,...
  • Allis-Chalmers side nameplate fastener set for farm tractors, with silver dome-head rivets and black steel clips arranged on a white background.

    Allis-Chalmers Side Nameplate Rivets & Steel Clips Set

    Allis-Chalmers
    $19.75
    DJS015
    Part Number: DJS015Allis-Chalmers Side Nameplate Rivets & Steel Clips SetSet includes 14 aluminum rivets and 14 steel clips. For select Allis-Chalmers tractor side nameplates...
  • A square-shaped gasket with rounded edges and six holes, likely for mounting, designed for Allis-Chalmers CA D10 D12 Hydraulic Pump Opening Cover.

    Allis-Chalmers CA D10 D12 Hydraulic Pump Opening Cover Gasket

    Allis-Chalmers
    $9.00
    70225194
    Hydraulic pump opening cover gasket for Allis-Chalmers CA, D10, and D12 models.Use for the pump body to reservoir connection.Part Number: 70225194FitsAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers...
  • Allis-Chalmers Water Temperature Gauge, industrial water temperature meter with 130-280 degree range, with metal mounting and coiled sensor cable.

    Allis-Chalmers Water Temperature Gauge 130-280 Degree Range

    Allis-Chalmers
    $26.75
    UTG25
    Part Number: UTG25OverviewWater temperature gauge with a 130-280 degree range. Dash mount design with block fitting and chrome bezel included.Specs130-280 degree rangeDash mountIncludes block...
  • Chrome bullet-style 12-volt tail light assembly for Allis-Chalmers farm tractors, with a red lens, mounting stud, and two black wires.

    Allis-Chalmers 12 Volt Chrome Bullet Style Tail Light Assembly

    Allis-Chalmers
    $29.00
    AC-099D
    12 volt chrome bullet style tail light assembly for select Allis-Chalmers and John Deere models. It is a 1 wire 12 volt chrome bullet style tail light assembly with a plastic lens.Part Number:...
  • Black curved lower water pipe for Allis-Chalmers D10, D12, D14, and D15 farm tractors, with a small brass-colored fitting near the bend.

    Allis-Chalmers Lower Water Pipe for D10 D12 D14 D15 | AC-249D

    Allis-Chalmers
    $39.75
    AC-249D
    Lower water pipe for Allis-Chalmers D10, D12, D14, and D15. Fits gas and LP models. SKU AC-249D.Part Number: AC-249DFitsAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers D14Allis-Chalmers...
  • Allis-Chalmers Viton needle float valve kit C102V for farm tractors, shown with a brass threaded valve seat, brass needle valve with black Viton tip, reddish-brown sealing washer, and metal retaining clip on a white background.

    Allis-Chalmers Viton Needle Float Valve C102V

    Allis-Chalmers
    $15.50
    C102V
    Viton needle float valve for Allis-Chalmers tractors. Fits multiple models and replaces Zenith 70233914.Part Number: C102VFitsAllis-Chalmers BAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers...
  • Allis-Chalmers Delco Starter Commutator Brush Band Cover, metallic band with mounting screw for engine starter repair.

    Delco Starter Commutator Brush Band Cover

    Allis-Chalmers
    $19.75
    AB-1203D
    Delco starter commutator (brush) band cover. Made in the USA and includes a screw and nut. Part Number AB-1203D Specs Bare metal, approximately 1-1/4" wide, for a 4-1/2" OD Delco starter housing...
  • Allis-Chalmers tractor valve train kit arranged in four groups on a white background, each with two metal valves, two coil springs, and two cylindrical valve guides.

    Allis Chalmers Valve Train Kit B C IB RC CA

    Allis-Chalmers
    $124.75
    AC-2129D
    Valve train kit for select Allis Chalmers models. Includes the listed replacement parts and usage notes.Part Number: AC-2129DFitsB, C, IB, RC (with engine serial numbers CE161057 and above)CAD10 (up...
  • A square gasket with rounded edges and multiple bolt holes around its perimeter, designed for Allis-Chalmers farm tractors' transmission side or control cover.

    Allis-Chalmers Transmission Side Cover / Control Cover Gasket

    Allis-Chalmers
    $13.75
    70225433
    Transmission side cover / control cover gasket for Allis-Chalmers tractors. Fits the models listed below.Part Number: 70225433FitsAllis-Chalmers CAAllis-Chalmers D10Allis-Chalmers D12Allis-Chalmers...
  • Polished metal steering wheel spinner for an Allis-Chalmers farm tractor, shown with its mounting brackets and two bolts on a white background.

    Steering Wheel Spinner

    Allis-Chalmers
    $13.50
    ACR3275
    Ball bearing steering wheel spinner made of aluminum.Part Number: ACR3275FitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational - variousJohn Deere - variousMassey...
  • Allis-Chalmers Air Cleaner Oil Cup Clamp for Allis-Chalmers B IB C CA RC G / IH IH-181D, black metal oil cup clamp with screw mechanism for securing air cleaner oil cup.

    Air Cleaner Oil Cup Clamp for Allis-Chalmers B IB C CA RC G / IH IH-181D

    Allis-Chalmers
    $10.75
    IH-181D
    Air cleaner oil cup clamp for Allis-Chalmers B, IB, C, CA, RC, and G tractors.New replacement part with the key reference numbers preserved: AC 225817, IH 52872D, and IHS181.FitsAllis-Chalmers: B,...
  • Allis-Chalmers Light Ring 4-3/4 inch, black circular light ring with mounting hardware for agricultural equipment.

    Light Ring 4-3/4"

    Allis-Chalmers
    $15.75
    IH-353BD
    Light ring 4-3/4" with black finish.Interchangeable with original.Part Number: IH-353BDFitsAllis-Chalmers B, IB, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45AveryCase VA, VAC, VAH (All up...
  • A silver Allis-Chalmers tractor mini alternator with a large black pulley, mounting ears, and visible copper windings. Product listing identifies it as a 1-wire, 35-amp alternator with pulley.

    1 Wire Mini Alternator with Pulley 35 Amp

    Allis-Chalmers
    $199.50
    AB-535D
    1 wire mini alternator with pulley, 35 amp. Used to convert 6 volt systems to 12 volt systems on negative ground systems only. Preferred for tractors requiring a smaller diameter alternator for...
  • Long, narrow yellow-and-cream Allis-Chalmers D Series hydraulic position control vinyl decal with small text and control markings, shown on a white background.

    Allis Chalmers D Series Hydraulic Position Control Vinyl Decal

    Allis-Chalmers
    $11.00
    DJS2496
    Hydraulic position control vinyl decal for listed Allis Chalmers D Series models.Part Number: DJS2496FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis Chalmers...
  • Close-up of a gray cast-metal crankshaft pulley for Allis-Chalmers CA, D14, D10, and D12 farm tractors. The round pulley has a raised central hub with a large bore, three mounting holes, and a small threaded hole.

    Crankshaft Pulley for Allis Chalmers CA D14 D10 D12

    Allis-Chalmers
    $54.75
    AC-089D
    Part Number: AC-089DAllis Chalmers Crankshaft PulleyFor Allis Chalmers CA, D14, D10 (up to sn 35000), and D12 (up to sn 3000). Serviceable for B, C, and IB, but does not have provisions for hand...