Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers Left Side Hood Latch Bracket Allis Chalmers D10 D12

    Left Side Hood Latch Bracket Allis Chalmers D10 D12

    Allis-Chalmers
    $18.00
    D10D12L
    Left side hood latch bracket for Allis Chalmers D10 and D12 tractors.Bolts to the side of the radiator housing. Sold individually.Part Number: D10D12LFitsAllis Chalmers D10Allis Chalmers D12NotesThis...
    Add to Cart
  • Allis-Chalmers Light Ring 4-3/4 inch, black circular light ring with mounting hardware for agricultural equipment.

    Light Ring 4-3/4"

    Allis-Chalmers
    $15.75
    IH-353BD
    Light ring 4-3/4" with black finish.Interchangeable with original.Part Number: IH-353BDFitsAllis-Chalmers B, IB, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45AveryCase VA, VAC, VAH (All up...
    Add to Cart
  • Allis-Chalmers Light Terminal, industrial black metal component with mounting screws and a metal bracket for electrical connection.

    Light Terminal

    Allis-Chalmers
    $6.75
    IH-475D
    Light terminal for listed tractor models.Part Number: IH-475DFitsAllis-Chalmers B, C, CA, D10, D12, D14, D15 (up to sn 9001), WC, WD, WD45, WF, RCAveryCase LA, SC, DC, 600, 900, 700, 800, 400, 500,...
    Add to Cart
  • Image of a Zenith Carburetor designed for Allis-Chalmers farm tractors including models B, C, CA, RC, D10, D12.

    Zenith Carburetor for Allis-Chalmers B, C, CA, RC, D10, D12

    Allis-Chalmers
    $386.00
    1603-0002
    Zenith style replacement carburetor for Allis-Chalmers tractors. Bolt spacing is 2 5/16" C to C and it can be used with or without cable choke.Part Number: 1603-0002FitsAllis Chalmers - IB, RC, B, C,...
    Add to Cart
  • Allis-Chalmers D-Series Seat Bumper for Deluxe Seats, black rubber bumper with a brass threaded screw for attachment.

    Allis Chalmers D-Series Seat Bumper for Deluxe Seats

    Allis-Chalmers
    $16.00
    70231982
    Seat bumper for deluxe seats on listed Allis Chalmers D-Series tractors.Part Number: 70231982FitsAllis Chalmers D10Allis Chalmers D12 Series IIIReplaces / Cross Reference7031982231982Specs5/16" -16...
    Add to Cart
  • Allis-Chalmers Right Hand Side Hood Latch Bracket Allis Chalmers D10 D12

    Right Hand Side Hood Latch Bracket Allis Chalmers D10 D12

    Allis-Chalmers
    $18.00
    D10D12R
    Right hand side hood latch bracket for Allis Chalmers D10 and D12 tractors.Bolts to the side of the radiator housing. Sold individually.Part Number: D10D12RFitsAllis Chalmers D10Allis Chalmers...
    Add to Cart
  • Allis-Chalmers Front Wheel Bearing Kit, set including bearings and seals for Allis Chalmers D10, D12, D15, D17 models, part number 70247801.

    Front Wheel Bearing Kit Allis Chalmers D10 D12 D15 D17

    Allis-Chalmers
    $63.00
    70247801
    Front wheel bearing kit for select Allis Chalmers models with the listed hub and axle configurations.Part Number: 70247801FitsAllis Chalmers - D10 (High Clearance sn 9001 & up), D10 (H.D. front axle...
    Add to Cart
  • Allis-Chalmers Oil Seal for Allis-Chalmers, Case, Ford, IH, John Deere - close-up view of oil seal with black rubber inner ring and yellow-brown outer ring for machinery lubrication.

    Oil Seal for Allis-Chalmers, Case, Ford, IH, John Deere

    Allis-Chalmers
    $15.75
    AB-1543D
    Oil seal for the listed Allis-Chalmers, Case, Ford, IH/Farmall, and John Deere applications. Verify fitment by model and notes before ordering.Part Number: AB-1543DFitsAllis Chalmers: PTO output...
    Add to Cart
  • Allis-Chalmers Battery Cable 13" (Non-Insulated) AB-405D, a braided metallic battery cable with eyelet connectors on both ends for tractor battery connection.

    Allis-Chalmers Battery Cable 13" Non-Insulated AB-405D

    Allis-Chalmers
    $21.75
    AB-405D
    Battery Cable AB-405DThis 13-inch non-insulated battery cable is a 2-gauge ground cable with straight terminals and 1/2-inch eyelet openings.Keep the important fitment and replacement details below...
    Add to Cart
  • Allis-Chalmers Gasket Paper Roll, 98 inches long, flat roll of gasket paper material

    Gasket Paper Roll 98" Long

    Allis-Chalmers
    $18.75
    AB-1844D
    Gasket paper roll for making general purpose gaskets. Not for high temperature applications.Part Number: AB-1844DFitsAllis Chalmers: VariousAvery: VariousCase: VariousCockshutt: VariousFord:...
    Add to Cart
  • Allis-Chalmers OEM Style Choke Rod Knob for Allis Chalmers D10 D12 D14 D15 D17, black round tractor control knob

    OEM Style Choke Rod Knob for Allis Chalmers D10 D12 D14 D15 D17

    Allis-Chalmers
    $6.75
    70228321
    OEM Style Choke Rod Knob for Allis Chalmers D10, D12, D14, D15, and D17. Verify the application notes and thread size before ordering.Part Number: 70228321FitsD10 (as a choke knob)D12 (as choke...
    Add to Cart
  • Allis-Chalmers Combo Light Switch Knob, black plastic knob only for lighting control.

    Combo Light Switch Knob (Knob Only)

    Allis-Chalmers
    $7.95
    AB-536D
    Combo light switch knob only for multiple tractor applications. Preserves the original handle-style knob requirement where noted.Part Number: AB-536DFitsAllis-Chalmers: 190, D21, D19, D17 (SN: 42001...
    Add to Cart
  • Allis-Chalmers Seat Shock Absorber Fits Monroe Seat, black automotive shock absorber for seat suspension.

    Seat Shock Absorber Fits Monroe Seat

    Allis-Chalmers
    $48.75
    IH-329D
    The only newly manufactured oil-filled seat shock available. Competing products use air shocks built for automotive suspension, not tractors.Direct-fit rear seat shock absorber for tractors equipped...
    Add to Cart
  • Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47, two metallic gold-colored hole plugs with a smooth and textured surface, one with a snap-in design and the other plain.

    Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47

    Allis-Chalmers
    $1.50
    9563K47
    Nickel-plated 1" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for key ignition switch use.Part Number: 9563K47FitsAllis-Chalmers D Series TractorsSpecsSize: 1 inchNotesKey ignition...
    Add to Cart
  • Allis-Chalmers Ammeter Gauge (30-0-30) - A0NN10670A

    Ammeter Gauge (30-0-30)

    Allis-Chalmers
    $10.00
    A0NN10670A
    Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series l, 190XT Series II, 200, 210, 220, 220FWA, I-40, I-400, I-60, I-600Avery: variousCase: C, CC, D, DC, DI, DO,...
    Add to Cart
  • Photo of Allis-Chalmers Nut and Sleeve Kit for a 1/4 inch Steel Hydraulic Line to Traction Booster Gauge, consisting of two metallic parts.

    Nut And Sleeve Kit for 1/4" Steel Hydraulic Line to Traction Booster Gauge

    Allis-Chalmers
    $5.75
    K216-K224
    Nut and sleeve kit for 1/4" steel hydraulic line to the Traction Booster Gauge (AC-124D).Your steel line must be flared using a flaring tool.Part Number: K216-K224FitsAllis Chalmers CAAllis Chalmers...
    Add to Cart
  • Allis-Chalmers Flywheel Ring Gear Allis Chalmers D10 D12 D14 D15 70233196

    Allis-Chalmers Flywheel Ring Gear 116 Teeth

    Allis-Chalmers
    $44.00
    AC-206D
    Flywheel ring gear for listed Allis-Chalmers tractors.116 teeth.Part Number: AC-206DFitsAllis Chalmers: D10 (sn 3501 and up), D12 (sn 3001 and up), D14 (sn 19001 and up), D15 GAS, I60, I500,...
    Add to Cart