Same Day Shipping On 99% Of Orders

Allis Chalmers D14 Tractor Parts

About the Allis-Chalmers D14

The D14 opened the Allis-Chalmers D Series in 1957 as a new compact tractor for row-crop and general farm work. Its 149-cubic-inch four-cylinder engine was available for gasoline or LP gas, and the four-speed transmission could be paired with a transfer case for more gear choices. The D14 was equipped with the Power Director hand clutch, which gave the operator live PTO control without stopping the tractor.

Built through 1960, the D14 sits between the older CA and WD-era tractors and the D15 that followed it. The serial number table below can help identify the tractor's year.

Serial Number Reference

Serial number locations: The tractor serial number is stamped at the left front end of the torque tube. The engine serial number is on the rear left-hand side of the engine, behind the carburetor.

The table below shows the beginning tractor serial number for each Model D14 year:

 

1957-1958
Model D14 year Beginning serial number
1957 1,001
1958 9,400
1959-1959
Model D14 year Beginning serial number
1959 14,900
1960-1960
Model D14 year Beginning serial number
1960 21,800

Total production: 23,050 Model D14 tractors.

Allis-Chalmers D14 Paint Reference

For restoration planning, the Allis-Chalmers D14 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D14 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47, two metallic gold-colored hole plugs with a smooth and textured surface, one with a snap-in design and the other plain.

    Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47

    Allis-Chalmers
    $1.50
    9563K47
    Nickel-plated 1" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for key ignition switch use.Part Number: 9563K47FitsAllis-Chalmers D Series TractorsSpecsSize: 1 inchNotesKey ignition...
    Add to Cart
  • Allis-Chalmers Ammeter Gauge (30-0-30) - A0NN10670A

    Ammeter Gauge (30-0-30)

    Allis-Chalmers
    $10.00
    A0NN10670A
    Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series l, 190XT Series II, 200, 210, 220, 220FWA, I-40, I-400, I-60, I-600Avery: variousCase: C, CC, D, DC, DI, DO,...
    Add to Cart
  • Allis-Chalmers Nut And Sleeve Kit for 1/4" Steel Hydraulic Line to Traction Booster Gauge, metallic components with threaded ends.

    Nut And Sleeve Kit for 1/4" Steel Hydraulic Line to Traction Booster Gauge

    Allis-Chalmers
    $5.75
    K216-K224
    Nut and sleeve kit for 1/4" steel hydraulic line to the Traction Booster Gauge (AC-124D).Your steel line must be flared using a flaring tool.Part Number: K216-K224FitsAllis Chalmers CAAllis Chalmers...
    Add to Cart
  • Allis-Chalmers Flywheel Ring Gear Allis Chalmers D10 D12 D14 D15 70233196

    Allis-Chalmers Flywheel Ring Gear 116 Teeth

    Allis-Chalmers
    $44.00
    AC-206D
    Flywheel ring gear for listed Allis-Chalmers tractors.116 teeth.Part Number: AC-206DFitsAllis Chalmers: D10 (sn 3501 and up), D12 (sn 3001 and up), D14 (sn 19001 and up), D15 GAS, I60, I500,...
    Add to Cart
  • Allis-Chalmers Complete Seat Assembly, black and white cushioned seat for tractor or equipment.

    Allis Chalmers Complete Seat Assembly

    Allis-Chalmers
    $365.00
    DJS221
    Complete seat assembly for select Allis Chalmers tractors. Includes a metal seat pan and seat cushions with wood backing.This seat assembly is a great seat option at a fraction of the cost.Part...
    Add to Cart
  • Allis-Chalmers Clutch Alignment Tool for Allis-Chalmers B, C, CA, IB, D10, D12, D14, D15, black metal tool used for aligning clutches during assembly or maintenance.

    Clutch Alignment Tool for Allis-Chalmers B, C, CA, IB, D10, D12, D14, D15

    Allis-Chalmers
    $18.75
    1212-1600
    Clutch alignment tool for Allis-Chalmers B, C, CA, IB, D10, D12, D14, and D15. 10 spline.Part Number: 1212-1600FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers...
    Add to Cart
  • Allis-Chalmers Clutch Pilot Bushing Allis Chalmers D10 D12 D14 70228188

    Clutch Pilot Bushing for Allis-Chalmers D10, D12, D14

    Allis-Chalmers
    $13.50
    70228188
    Clutch pilot bushing for Allis-Chalmers tractors. Check the fitment details below to confirm your application.Part Number: 70228188FitsAllis Chalmers D10 (Up to SN 3501)Allis Chalmers D12 (Up to SN...
    Add to Cart
  • Allis-Chalmers In-line Fuel Filter

    Inline Fuel Filter 33033

    Allis-Chalmers
    $8.75
    33033
    Part Number: 33033Inline Fuel FilterIn-line fuel filter for use with 3/8" fuel lines. Includes hose and clamps and is Used to help keep rust and dirt out of the carburetor.FitsAllis Chalmers -...
    Add to Cart
  • Allis-Chalmers Tube 4.00, 5.00, 5.50 X 15" tire tube, black rubber inner tube for tractor or machinery wheel.

    Tube 4.00, 5.00, 5.50 x 15 for Allis-Chalmers

    Allis-Chalmers
    $18.00
    WH-053D
    New tube for 4.00, 5.00, 5.50 x 15" tires. Fitment is listed for Allis-Chalmers and several other tractor brands.Part Number: WH-053DFitsAllis ChalmersAveryCaseCockshuttIH / FarmallJohn DeereMassey...
    Add to Cart
  • Allis-Chalmers Pinion Shaft 3rd Gear CA D10 D12 D14 D15, metal gear component for agricultural machinery.

    Allis Chalmers Pinion Shaft 3rd Gear CA D10 D12 D14 D15

    Allis-Chalmers
    $199.75
    AC-285D
    Pinion shaft 3rd gear for late Allis Chalmers CA, D10, D12, D14, and D15 tractors.For tractors below the serial numbers listed, you must also order AC-282D reverse gear.Part Number: AC-285DFitsLate...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Metal Seat Pan - D10 D12 D14 D15 D17 D19 D21 170 175 180 185 190 190XT 210 220

    Allis Chalmers Metal Seat Pan for D10, D12, D14, D15, D17, D19, D21

    Allis-Chalmers
    $188.00
    KM7539
    Allis Chalmers metal seat pan for select tractor models. Made in the USA with a steel frame and restoration-quality construction.Part Number: KM7539FitsD10D12D14D15D17D19D21Also fits 170, 175, 180,...
    Add to Cart
  • Allis-Chalmers Rear Crankshaft Seal D10 D12 D14 D15, image of a black rubber rear crankshaft seal for Allis-Chalmers tractors.

    Allis Chalmers Rear Crankshaft Seal D10 D12 D14 D15

    Allis-Chalmers
    $24.75
    AB-2000D
    Rear crankshaft seal for listed Allis Chalmers tractor and equipment applications.Part Number: AB-2000DFitsAllis Chalmers - D10, D12, D14, D15, I40, I400, I60 (Gas & LP), Crawler: H3 (Gas & LP),...
    Add to Cart
  • Allis-Chalmers HOT Coil, 55000-Volts, 12V high-voltage coil for industrial or agricultural equipment, shown with mounting bolts on a beige top plate.

    Allis-Chalmers HOT Coil 55000-Volts 12V AB-348D

    Allis-Chalmers
    $59.75
    AB-348D
    Allis-Chalmers HOT Coil 55000-Volts 12V AB-348D12V high-voltage coil for applications listed below. For faster starting, reduced plug fouling, and longer plug life.Important: Must use with AB-366D...
    Add to Cart
  • Allis-Chalmers OEM 3 piece Rear Hydraulic Ram Seal Assembly Allis Chalmers D14 D15 70229709

    Allis Chalmers D14 D15 3-Piece Rear Hydraulic Ram Seal Assembly

    Allis-Chalmers
    $37.50
    70229709
    Allis Chalmers D14, D153-Piece Rear Hydraulic Ram Seal AssemblyInternal in Rear Axle HousingPart Number: 70229709FitsD14D15Replaces / Cross Reference70229709229709Ordering NotesMatch the gasket or...
    Add to Cart
  • Pertronix Electronic Ignition Conversion Kit 12V Allis Chalmers 170 175 D14 D17 12V- Ground Delco 1112463 1112688

    Electronic Ignition Conversion Kit 12V - Allis Chalmers D14, D17, 170, 175

    Pertronix
    $183.00
    ACR3894
    Part Number: ACR3894 Electronic Ignition Conversion Kit Ignitor Delco fits 4 cylinder applications with 12 volt negative ground. This electronic ignition conversion kit replaces points and condenser...
    Add to Cart
  • Allis-Chalmers Universal Oil Pressure Gauge (0-50 LB) - AB-082D

    Universal Oil Pressure Gauge 0-50 LB

    Allis-Chalmers
    $21.75
    AB-082D
    Universal oil pressure gauge with a 0-50 LB range and the applications listed below. Black face with white letters, chrome bezel, and no logo.Part Number: AB-082DFitsAllis Chalmers - WD45 Dsl, D10,...
    Add to Cart
  • Allis-Chalmers Torque Housing To Transmission Gasket Allis Chalmers D14 D15 70250607

    Allis-Chalmers Torque Housing to Transmission Gasket D14 D15

    Allis-Chalmers
    $26.00
    70250607
    Part Number: 70250607Torque Housing to Transmission GasketTorque housing to transmission gasket for Allis-Chalmers tractors. Fits the models listed below and includes the numbers shown with the item...
    Add to Cart
  • Allis-Chalmers OIL GAUGE FITTING

    OIL GAUGE FITTING

    Allis-Chalmers
    $13.75
    5220K31
    Oil gauge fitting for the applications listed below. Brass fitting for models using 1/8" oil line and made in the USA.Part Number: 5220K31FitsAllis ChalmersCaseCockshuttFordIH / FarmallJohn De
    Add to Cart