Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Sort By:

Display Type:
Filters
  • Allis-Chalmers Auxiliary Male 2 Pin Connector Plug, metallic connector with two gold pins and hexagonal nut on top, used for electrical connections.

    Auxiliary Male 2 Pin Connector Plug

    Allis-Chalmers
    $29.75
    AB-1868D
    Auxiliary Male 2 Pin Connector Plug with threaded cable grip and plated brass pins.For 12-18 gauge wire. Wires must be soldered or crimped.Part Number: AB-1868DFitsAllis Chalmers - variousCase -...
  • Allis-Chalmers CIGARETTE LIGHTER - IH-949D

    Cigarette Lighter for Allis Chalmers, Case, Cockshutt, IH, John Deere

    Allis-Chalmers
    $30.00
    IH-949D
    Cigarette Lighter with an anodized aluminum knob imprinted with the word "LIGHTER".Part Number: IH-949DFitsAllis Chalmers: D14 (SN: 19001 & up), D17 (12 volt systems)Case: 300B, 320B, 400B, 420B,...
  • Allis-Chalmers Front Weight Anchor Rod, image of a black elongated metal rod with a threaded end and a nut, used for Allis Chalmers D15, D17, D19 tractors.

    Front Weight Anchor Rod for Allis Chalmers D15, D17, D19

    Allis-Chalmers
    $25.75
    AC-239D
    Front weight anchor rod for Allis Chalmers D15, and correct for D17 and D19.Holds up to 4 AC-180D front weights.Part Number: AC-239DFitsAllis Chalmers: D15, CORRECT FOR D17, D19Replaces / Cross...
  • Allis-Chalmers Front Weight Bracket Kit for D15, D17, D19, metal brackets with multiple bolt holes for agricultural tractor front weight attachment.

    Allis Chalmers Front Weight Bracket Kit for D15, D17, D19

    Allis-Chalmers
    $199.50
    AC-238D
    Allis Chalmers front weight bracket kit for D15, D17, and D19.USA made kit with LH & RH front sides and front cross bar. Some models or series may require extra mounting hole added.Part Number:...
  • Allis-Chalmers I&T Shop Service Manual, front cover with tractor illustration and descriptive text.

    Allis Chalmers I&T Shop Service Manual

    Allis-Chalmers
    $41.75
    AC-201M
    Allis Chalmers I&T Shop Service ManualAuthentic tractor manual with information for repairs, restoration, specifications, torques, exploded views, and photos. Offers useful shortcuts that may save...
  • Allis-Chalmers REAR SPINOUT RIM STOP  Allis Chalmers  Ford  Case  Massey Ferguson  JD

    REAR SPINOUT RIM STOP for Allis-Chalmers, Ford, Case, Massey Ferguson, JD

    Allis-Chalmers
    $17.00
    MI-109D
    Rear spinout rim stop for parallel drilled rim rails. For spin out rims using 6 sided stops. Fits all of our spin out rims we sell.Part Number: MI-109DFitsAllis Chalmers: variousCase:...
  • Allis-Chalmers REAR SPINOUT (Power Shift) RIM 13 X 28 - WH-008D

    Allis-Chalmers Rear Spinout Rim 13 x 28

    Allis-Chalmers
    $749.75
    WH-008D
    Rear spinout (Power Shift) wheel rim, 13 x 28. 4 rails with stop adjustment holes drilled 90 degrees perpendicular to the side of the rim, not 90 degrees to the rail. USA made.To determine rim width,...
  • Allis-Chalmers REAR SPINOUT RIM STOP Allis Chalmers Case Ford Massey Ferguson JD

    Rear Spinout Rim Stop for Allis Chalmers, Case, Ford, Massey Ferguson, JD

    Allis-Chalmers
    $16.75
    MI-108D
    Rear spinout rim stop for Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, and Oliver.90 degree drilled rim rail for spinout rims with 4 sided rectangle...
  • Allis-Chalmers Rim Stop Bolt - Allis Chalmers, Case, Ford, JD, Massey Ferguson

    Rim Stop Bolt for Allis Chalmers, Case, Ford, JD, Massey Ferguson

    Allis-Chalmers
    $8.75
    MI-110D
    Rim stop bolt for listed tractor models from Allis Chalmers, Case, Cockshutt, Ford, IH/Farmall, JD, Massey Ferguson, Massey Harris, MM, Oliver, White, and Landini.Use with parallel or 90 degree...
  • Allis-Chalmers REAR TIRE INNER TUBE VALVE - AB-384D

    Rear Tire Inner Tube Valve for Tractor Tubes with External Threads

    Allis-Chalmers
    $11.75
    AB-384D
    Rear tire inner tube valve for tractor tubes with external threads.Old style air/water valve, sold individually.Part Number: AB-384DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn...
  • Allis-Chalmers Tire Inner Tube Valve Brass Nut

    Tire Inner Tube Valve Brass Nut

    Allis-Chalmers
    $2.00
    AB-385D
    Brass nut for rear tire inner tube valve use. Sold individually.Part Number: AB-385DFitsAllis Chalmers - variousCase - variousCockshutt - variousFord - variousInternational - variousJohn Deere -...
  • Allis-Chalmers Front Wheel Rim 6 x 16 inches, 6 Lug, painted in cream color, designed for vintage or agricultural tractors.

    Front Wheel Rim 6 x 16" 6 Lug

    Allis-Chalmers
    $119.75
    WH-043D
    Front Wheel Rim 6 x 16" 6 LugFor select tractors using a 6 x 16" 6 lug rim. USA made.Part Number: WH-043DFitsAllis Chalmers: Some D17 (SN: 75001 & up), D19, 160, 170, 175, 180, 185, 190, 190XT, 200,...
  • Allis-Chalmers Front Wheel Lug Bolt Rear Rim Lug Bolt

    Front Wheel Lug Bolt Rear Rim Lug Bolt

    Allis-Chalmers
    $3.00
    AB-399D
    Front wheel lug bolt / rear rim lug bolt. New, zinc-coated bolt with listed model applications and replacement numbers below.Part Number: AB-399DFitsAllis Chalmers: B, C, CA, RC, WC, WD, WD45, G,...
  • Allis-Chalmers Front Wheel Clamp Lock Nut for Allis-Chalmers, Avery, Case, Ford, John Deere, Massey Ferguson, showing a metal locking nut with internal gear teeth and a small metal pin.

    Front Wheel Clamp Lock Nut for Allis-Chalmers, Avery, Case, Ford, John Deere, Massey Ferguson

    Allis-Chalmers
    $24.25
    AB-254D
    Front wheel clamp lock nut for Allis-Chalmers and other listed tractor models.Check thread size before ordering. For axle shaft and front wheel applications with 3/4" - 16 NF thread. No re-threading...
  • Allis-Chalmers Front Felt Dust Seal for Crankshaft and Wheels, black circular felt dust seal for machinery

    Front Felt Dust Seal for Crankshaft and Wheels

    Allis-Chalmers
    $6.75
    AB-270D
    Front felt dust seal for crankshaft and wheels, with the listed tractor applications below.Use the measurements and application notes to confirm fit before ordering.Part Number: AB-270DFitsAllis...
  • Allis-Chalmers 4.25 X 16 Front Wheel 5 Hole

    4.25 x 16 Front Wheel 5 Hole for Allis-Chalmers, Cockshutt, Massey Harris

    Allis-Chalmers
    $199.75
    AC-009D
    4.25 x 16 front wheel, 5 hole with listed applications below.Not For tubeless applications. Not recommended for tractors with loaders.Part Number: AC-009DFitsAllis Chalmers: D17, D15, D14 (Early w/ 5...
  • Allis-Chalmers 4.5" x 16" 6 Lug Front Wheel with 4 Wheel Weight Holes, white, circular steel tractor wheel with bolt holes

    4.5" x 16" 6 Lug Front Wheel with 4 Wheel Weight Holes

    Allis-Chalmers
    $99.75
    WH-022D
    4.5" x 16" 6 Lug Front Wheel with 4 Wheel Weight HolesFor select tractors using a 4 1/2" x 16" 6 lug rim.Part Number: WH-022DFitsAllis Chalmers: ED40, D19, D17 (SN: 75001 and up, 6 Lug), D15 (SN:...
  • Allis-Chalmers Tire 6.00 x 16 Triple Rib 4 Ply, black rubber tractor tire with a triple rib tread pattern for Allis-Chalmers equipment.

    Tire 6.00 x 16 Triple Rib 4 Ply for Allis-Chalmers

    Allis-Chalmers
    $119.75
    WH-048D
    Tire only, 6.00 x 16" triple rib 4 ply. Fitment is listed for Allis-Chalmers and several other tractor brands.Part Number: WH-048DFitsAllis ChalmersAveryCaseCockshuttFordIH / FarmallJohn DeereMassey...