Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • A gasket designed for Allis-Chalmers farm tractors, specifically for models like D19, D15 Diesel, D17 Diesel. The gasket is flat, rectangular with rounded edges and has multiple holes for mounting and fitting other components.

    Allis Chalmers D19 D15 Diesel D17 Diesel Filter To Block Gasket

    AGCO
    $15.75
    70277112
    Filter to block gasket for Allis Chalmers D19, D15 diesel, and D17 diesel I, II, III models.Part Number: 70277112FitsD19D15 dieselD17 diesel I II IIISpecsFilter to block gasket
  • A circular clutch pressure plate for Allis-Chalmers D17 Series I, II, III farm tractors with various mounting and securing components.

    Allis Chalmers D17 Series I II III 11 Inch Clutch Pressure Plate

    Allis-Chalmers
    $521.00
    70229344
    11-inch clutch pressure plate for Allis Chalmers D17 Series I, II, and III.3 lever design with 1.437" flywheel step.Part Number: 70229344FitsD17 Series I II & III (not Series 4) up to S/N...
  • A metal upper brake pin for Allis-Chalmers D17 Series IV, 170, 175, 180, 185 farm tractors.

    Allis-Chalmers D17 Series IV, 170, 175, 180, 185 Upper Brake Pin

    Allis-Chalmers
    $18.75
    70237217
    Upper Brake Pin for Allis-Chalmers tractors.New part identified as 70237217.Part Number: 70237217FitsAllis-Chalmers D17 Series IVAllis-Chalmers 170Allis-Chalmers 175Allis-Chalmers 180Allis-Chalmers...
  • Metal lower brake pin for Allis-Chalmers farm tractors, compatible with models D17, 170, 175, 180, 185.

    Allis Chalmers Lower Brake Pin for D17, 170, 175, 180, 185

    Allis-Chalmers
    $19.75
    70237216
    Lower Brake Pin for Allis Chalmers tractors.Fits D17 Series IV, 170, 175, 180, and 185 models.Part Number: 70237216FitsD17 Series IV170175180185NotesNo longer available from AGCO.
  • A gasket designed for the distributor drive of Allis-Chalmers farm tractors like WC, WF, WD, WD45, and D17.

    Allis Chalmers WC WF WD WD45 D17 Distributor Drive Gasket

    AGCO
    $10.25
    70233217
    Part Number: 70233217Distributor & Magneto Drive GasketGasket for Allis Chalmers tractors in the listed models below.FitsAllis Chalmers WCAllis Chalmers WFAllis Chalmers WDAllis Chalmers WD45Allis...
  • Image of an Allis-Chalmers Upper Radiator Hose for D17 Diesel and D19 Diesel farm tractors.

    Upper Radiator Hose Allis Chalmers D17 Diesel D19 Diesel 70235361

    Allis-Chalmers
    $22.00
    70235361
    Upper radiator hose for Allis Chalmers D17 Diesel and D19 Diesel.Part Number: 70235361FitsAllis Chalmers D17 Diesel (SN 38964 & UP)Allis Chalmers D19 Diesel with 4-3/4 filler neckReplaces / Cross...
  • A set of bolts including some long and short bolts, likely designed for the head of an Allis-Chalmers D17 tractor engine.

    Allis Chalmers D17 Head Bolt Set Gas LP

    Allis-Chalmers
    $56.50
    D17HEADBOLTS
    Head bolt set for Allis Chalmers D17 Series I, II, III, and IV Gas & LP with 226 engine.Part Number: D17HEADBOLTSFitsAllis Chalmers D17 Series I, II, III, IV Gas & LP with 226 engineSpecsSet of 11...
  • Photo of Allis-Chalmers Nut and Sleeve Kit for a 1/4 inch Steel Hydraulic Line to Traction Booster Gauge, consisting of two metallic parts.

    Nut And Sleeve Kit for 1/4" Steel Hydraulic Line to Traction Booster Gauge

    Allis-Chalmers
    $5.75
    K216-K224
    Nut and sleeve kit for 1/4" steel hydraulic line to the Traction Booster Gauge (AC-124D).Your steel line must be flared using a flaring tool.Part Number: K216-K224FitsAllis Chalmers CAAllis Chalmers...
  • A white amp gauge with black markings, showing a range from 0 to 60 Amperes, used for Allis-Chalmers farm tractors. The gauge has the text "ALLIS-CHALMERS" at the bottom center and "AMPERES" at the top, with a needle pointing to just below 60.

    Allis Chalmers Amp Gauge 60-0-60 70254407

    Allis-Chalmers
    $44.50
    DJS70254407
    Aftermarket 60-0-60 gauge made just like the original ones that came on the tractor when new. Made to give it that original look.Part Number: DJS70254407FitsAllis Chalmers D10Allis Chalmers D12Allis...
  • A water temperature gauge for Allis-Chalmers farm tractors. The gauge displays the water temperature with a needle pointing to a position on a dial. The dial has a color-coded section indicating safe (white and green) and warning (red) temperature ranges. The face of the gauge is marked with 'WATER TEMPERATURE' and 'ALLIS-CHALMERS' in the center.

    Allis Chalmers Water Temperature Gauge

    Allis-Chalmers
    $51.50
    DJS70240989
    Aftermarket water temperature gauge made just like the original ones that came on the tractor when new. Made to give it that original look. Part Number: DJS70240989 Fits Allis Chalmers 175...
  • Round Allis-Chalmers tractor fuel gauge with a chrome-colored bezel, white dial marked FUEL LEVEL, E, 1/2, and F, a red low-fuel segment, and a black needle pointing near empty.

    Allis Chalmers Fuel Gauge

    Allis-Chalmers
    $51.50
    DJS70240988
    Aftermarket fuel gauge made just like the original ones that came on the tractor when new. Made to give it that original look. Part Number: DJS70240988 Fits Allis Chalmers D21 Allis Chalmers...
  • A complete seat assembly designed for Allis-Chalmers farm tractors, featuring black and white colored upholstery with a cushioned seat and backrest.

    Allis Chalmers Complete Seat Assembly

    Allis-Chalmers
    $365.00
    DJS221
    Complete seat assembly for select Allis Chalmers tractors. Includes a metal seat pan and seat cushions with wood backing.This seat assembly is a great seat option at a fraction of the cost.Part...
  • Image showing two black gasket strips designed for Allis-Chalmers farm tractors, specifically models WD45 Diesel, D17 Diesel, D19 Diesel, used for oil pan sealing.

    Allis Chalmers Oil Pan Gasket WD45 Diesel D17 Diesel D19 Diesel

    Allis-Chalmers
    $14.75
    74501199
    Oil pan gasket for the listed Allis Chalmers diesel applications.Part Number: 74501199FitsAllis Chalmers WD45 Diesel with D230 engineAllis Chalmers D17 Diesel with D262 engineAllis Chalmers D19...
  • A close-up photograph of an Allis-Chalmers 11-inch clutch disc designed for farm tractors, featuring a central hub with gear-like splines and four attached friction pads at the corners for added grip.

    11-Inch Clutch Disc for Allis Chalmers D17 IV D19 170 175

    Allis-Chalmers
    $224.00
    70247859
    Part Number: 7024785911" 4 Button Spring Loaded Clutch DiscThis clutch disc is listed for specific Allis Chalmers models. Verify fitment and spline details before ordering.FitsD17 Series IV (SN 75001...
  • Allis-Chalmers front hub assembly with 5 lug pattern, designed for farm tractors, not automobiles.

    Allis-Chalmers Front Hub Assembly 5 Lug

    Allis-Chalmers
    $104.50
    70228897
    Front Hub Assembly, 5 Lug. New Allis-Chalmers hub assembly for the listed models and serial ranges.Part Number: 70228897FitsAllis-Chalmers WDAllis-Chalmers WD45Allis-Chalmers D10 (SN 3501 &...
  • A metal clevis pin and R-clip used for Allis-Chalmers farm tractors, specifically for drawbar hanger cradle. The clevis pin is cylindrical with a hole at one end, showing signs of rust and wear. The R-clip is a shiny, curved metal pin that secures the clevis pin in place.

    Allis-Chalmers Clevis Pin & R-Clip for Drawbar Hanger Cradle

    Allis-Chalmers
    $5.75
    70220873
    Clevis Pin & R-Clip for Drawbar Hanger / Draw Bar Cradle. New set for listed Allis-Chalmers applications.Important fitment notes and measurements are preserved below.Part Number:...
  • A metal top link bracket designed for Allis-Chalmers D17 Series I, II, III tractors. It has multiple holes for mounting and an extended arm for attachment.

    Allis-Chalmers D17 Series I, II, III Top Link Bracket

    Allis-Chalmers
    $149.00
    KI1239
    Allis-Chalmers - D17 Series I, II, III (will not work on D17 Series IIII)Top link bracket fits between the seat and the transmission.Part Number: KI1239FitsD17 Series ID17 Series IID17 Series...
  • A black Flame Thrower Coil with a flame logo in the center, labeled as Pertronix Flame Thrower Coil 40,000 Volts 12V, designed for Allis-Chalmers farm tractors.

    Pertronix Flame Thrower Coil 40,000 Volts 12V

    Pertronix
    $56.50
    ACR3205
    Pertronix Flame Thrower Coil, 40,000 volts, 12V, oil filled, high performance.Heavy duty mount in vertical position. Use with electronic ignition kit.Part Number: ACR3205Specs40,000 volts12VNotesOil...