Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Black circular O-ring for an Allis-Chalmers farm tractor PTO seal aluminum retainer, shown alone against a white background.

    Allis-Chalmers PTO Seal Aluminum Retainer O-Ring

    Allis-Chalmers
    $4.00
    70923583
    Allis-Chalmers PTO seal aluminum retainer O-ring. New part for the applications listed below.Part Number: 70923583FitsAllis Chalmers - D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 6000...
  • Brass Allis-Chalmers carburetor fuel bowl or LP regulator drain cock, part number 70915514, with a threaded body, hex nut, and flat metal wing handle.

    Carburetor Fuel Bowl Drain Cock, LP Regulator Drain Cock for Allis-Chalmers 70915514

    Allis-Chalmers
    $7.75
    70915514
    Carburetor fuel bowl drain cock and LP regulator drain cock for listed Allis-Chalmers models. Includes 1/8" NPT and replacement 70915514.Part Number: 70915514FitsAllis Chalmers WC (Zenith & Marvel...
  • Allis-Chalmers valve train kit components arranged in four groups on a white background, each with two valves, small valve keepers, a pair of valve springs, and two cylindrical valve guides or related parts.

    Valve Train Kit for Allis-Chalmers D17, 170, 175

    Allis-Chalmers
    $144.75
    VTKACD17
    Valve train kit for Allis-Chalmers D17, 170, and 175 applications listed below.Includes valves, guides, springs, and keepers. Retainers are not included.Part Number: VTKACD17FitsAC Combines - [ E,...
  • Brass distributor shaft bushing with six flat shims for an Allis-Chalmers Delco distributor repair kit for farm tractors.

    Delco Distributor Shaft Bushing & Shim Kit for Allis-Chalmers, Avery, Case, Cockshutt, Oliver, John Deere

    Allis-Chalmers
    $25.75
    AB-3007D
    Delco distributor shaft bushing & shim kit for the listed Allis-Chalmers and other equipment applications.Use the included bushing and shims for the applications shown below. The bushing needs to be...
  • Allis-Chalmers wheel bearing sleeve and seal kit, showing a wide silver metal sleeve on the left and a dark circular seal on the right, for compatible D10, D12, D14, D15, D17, D19, 160, 170, 175, 180, 185, 190, and 190XT farm tractors.

    Wheel Bearing Sleeve & Seal Kit for Allis Chalmers D10, D12, D14, D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT

    Allis-Chalmers
    $16.75
    70235120
    Wheel Bearing Sleeve & Seal Kit for Allis Chalmers tractors.Part Number: 70235120FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis Chalmers D17Allis Chalmers D19Allis...
  • Circular clutch input shaft seal for Allis-Chalmers farm tractors, with a brown outer face, black inner sealing lip, and blue outer edge.

    Clutch Input Shaft Seal for Allis Chalmers 170, 175, D17 Series IV

    Allis-Chalmers
    $19.50
    70242499
    Clutch Input Shaft Seal for Allis Chalmers tractors.Part Number: 70242499FitsAllis Chalmers 170Allis Chalmers 175Allis Chalmers D17 Series IVReplaces / Cross Reference70242499242499Specs0.315" thick1...
  • Black 12-volt voltage regulator with metal mounting tabs for Allis-Chalmers WD45, D15, and D17 diesel farm tractors.

    12 Volt Voltage Regulator for Allis-Chalmers WD45 D15 D17 Diesel

    Allis-Chalmers
    $38.00
    ACR6368
    12 volt voltage regulator for select Allis-Chalmers and other tractor applications.This is a 12 V voltage regulator saddle mount.Part Number: ACR6368FitsAllis Chalmers - [WD45 Diesel, D15 Diesel, D17...
  • Close-up of a metal clutch pilot bearing for Allis-Chalmers and other farm tractors, with a silver outer race, dark sealed face, and open center.

    Clutch Pilot Bearing - Allis-Chalmers, International, Massey Harris

    Allis-Chalmers
    $10.00
    AB-2937D
    Clutch pilot bearing for select Allis-Chalmers, International, and Massey Harris applications.This is a sealed bearing. Dimensions are listed below.Part Number: AB-2937DFitsAllis Chalmers - D17, D19,...
  • Four black circular valve cover mounting grommet washers arranged in a two-by-two layout on a white background.

    Allis-Chalmers Valve Cover Mounting Grommets Washers 70226477

    Allis-Chalmers
    $9.40
    70226477
    Allis Chalmers - B, IB, C, CA, RC, WD, WD45, WC, WF, D10, D12, D14, D15, D17, 170, 175 Part Number: 70226477 Replaces / Cross Reference 226477 70226477 Notes Contains: 4 Valve Cover Mounting...
  • Allis-Chalmers tractor ammeter gauge with a black 30-0-30 amp dial, chrome-colored bezel, and separate gold-tone mounting bracket.

    Ammeter Gauge (30-0-30)

    Allis-Chalmers
    $10.00
    A0NN10670A
    Allis Chalmers: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT Series l, 190XT Series II, 200, 210, 220, 220FWA, I-40, I-400, I-60, I-600Avery: variousCase: C, CC, D, DC, DI, DO,...
  • Cylindrical air filter element with white pleated media, a diamond-patterned metal mesh exterior, and dark rubber end caps, for Allis-Chalmers D17 Diesel, D19, and HD6 tractors.

    Air Filter - Allis Chalmers D17 Diesel, D19, HD6

    Allis-Chalmers
    $38.00
    AF1606
    Allis Chalmers - D17 Diesel (All Series), D19 (Gas & LP), HD6 (Gas & Diesel)Part Number: AF1606Replaces / Cross ReferenceTrac Brand replacement Air Filter AF160670235449235449
  • Cylindrical dry air filter for an Allis-Chalmers D17 farm tractor, with white pleated filter media, a silver diamond-mesh outer wrap, and black rims at both ends.

    Allis Chalmers D17 Dry Air Filter 70237395 237395

    Allis-Chalmers
    $36.50
    70237395
    Dry air filter for Allis Chalmers D17 tractors. Fits D17 all-series gas and LP applications.Condition: NewPart Number: 70237395FitsAllis Chalmers D17 (all series gas & LP)Replaces / Cross...
  • Gray metal step for an Allis-Chalmers D17 farm tractor, with a long angled support and a wide ridged footplate, shown against a white background.

    Allis Chalmers D17 Step

    Allis-Chalmers
    $98.75
    KI1171
    The Allis Chalmers D17 Step fits D17 Series I, II, and III tractors. It mounts to the existing holes on the platform for straightforward installation.Condition: NewPart Number: KI1171FitsAllis...
  • A short, hollow cylindrical steel bushing for an Allis-Chalmers farm tractor seat shock, shown at an angle on a white background.

    Allis Chalmers Seat Shock Steel Bushing

    Allis-Chalmers
    $5.95
    70226045
    Seat shock steel bushing for listed Allis-Chalmers tractor models.Part Number: 70226045FitsAllis Chalmers - B, IB, C, CA, RC, WC, WD, WD45, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190,...
  • Black Allis-Chalmers 10-spline clutch alignment tool for farm tractors, with a splined central shaft and circular handle.

    10 Spline Clutch Alignment Tool Allis Chalmers

    Allis-Chalmers
    $22.50
    AB-3113D
    10 spline clutch alignment tool for Allis Chalmers tractors and combines, plus select IH, John Deere, Minneapolis Moline, and Oliver models.Use the spline and pilot dimensions below to verify fit...
  • Close-up of an Allis-Chalmers D17 farm tractor fuel gauge, with a silver dial marked E, F, 1/4, 1/2, and 3/4 in an orange four-hole mounting plate.

    Allis Chalmers D17 Fuel Gauge 70229188

    Allis-Chalmers
    $79.99
    AC-2651D
    Allis Chalmers D17 fuel gauge for Series I, II, III, and IV gas or diesel models.Complete with gasket and 4 screws. Gauge face is the same as original.Part Number: AC-2651DFitsAllis Chalmers D17...
  • Circular Allis-Chalmers tractor engine clutch shaft seal retainer for a transmission input shaft, with a bronze-colored outer face, black inner seal, and blue outer rim.

    Allis-Chalmers Engine Clutch Shaft Seal Retainer, Transmission Input Shaft

    Allis-Chalmers
    $12.00
    70256909
    Allis Chalmers - D14, D15, D17 (Series I, II, III), D19, 180, 185, 190, 190XT, 190XT III, 200Part Number: 70256909Replaces / Cross Reference70256909, 256909, 70242624, 70228192Specs0.305" thick, 1...