Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • A brass oil gauge adapter or filter base adapter with threaded ends, designed for Allis-Chalmers farm tractors.

    Oil Gauge Adapter / Filter Base Adapter

    Allis-Chalmers
    $10.50
    5220K61
    Oil gauge adapter / filter base adapter for models using a 1/8" oil line.Part Number: 5220K61FitsAllis Chalmers - various modelsCase - various modelsCockshutt - various modelsFord - various modelsIH...
  • A metallic cylindrical tube with knurled grip at one end and a small hole drilled near the end, designed for Allis-Chalmers farm tractors, product number 70203899.

    Allis-Chalmers Oil Filter Tube Element Stand Pipe 70203899

    Allis-Chalmers
    $19.75
    KI1189
    Allis-Chalmers oil filter tube element stand pipe for the listed Allis-Chalmers and AC Misc. applications.Part Number: KI1189FitsAllis Chalmers - G, B, C, CA, IB, RC, WC, WF, WD, WD45, D10, D12, D14,...
  • A wiring harness kit with multiple colored wires for Allis-Chalmers D17 Diesel and D19 Diesel tractors.

    Wiring Harness Kit for Allis-Chalmers D17 Diesel and D19 Diesel

    Allis-Chalmers
    $282.00
    DJS1017
    Wiring Harness Kit for Allis-Chalmers D17 Series IV Diesel and D19 Diesel.Includes headlight wires and wiring instructions. Terminals are soldered and sealed.Part Number: DJS1017FitsAllis Chalmers...
  • A wiring harness kit with multiple color-coded wires and labeled connectors, designed for Allis-Chalmers D17 Gas Series III farm tractor.

    Wiring Harness Kit for Allis-Chalmers D17 Gas Series III

    Allis-Chalmers
    $279.00
    DJS1040
    Wiring Harness Kit for Allis-Chalmers D17 Gas Series III.Includes headlight wires and wiring instructions. Terminals are soldered and sealed.Part Number: DJS1040FitsAllis Chalmers D17 Gas, Series III...
  • Rust-colored camshaft gear with evenly spaced teeth around the outer edge, a central hole, and three smaller holes nearby, designed for Allis-Chalmers farm tractors.

    Allis Chalmers Camshaft Gear for WD45 D17 170 175 70227038

    Allis-Chalmers
    $199.75
    AC-2515D
    Camshaft gear for Allis-Chalmers WD45, D17, 170, and 175 with listed gas and LP engine applications. Also fits selected combines and miscellaneous equipment.Part Number: AC-2515DFitsAllis Chalmers -...
  • A large gear with evenly spaced teeth around the circumference and a hollow center, designed for use with Allis-Chalmers farm tractors.

    Allis Chalmers WD45 D17 170 175 Crankshaft Gear 70230217

    Allis-Chalmers
    $118.75
    AC-2631D
    Crankshaft gear for Allis-Chalmers applications including WD45, D17, 170, and 175. Also listed for Allis Combines and AC Miscellaneous equipment.Part Number: AC-2631DFitsAllis Chalmers - WD45 (Gas;...
  • A kit of pistons, sleeves, rings, and small engine parts specifically designed for Allis-Chalmers farm tractors like the WD45 and D17. The kit includes four pistons, sleeves, rings, and other components, with a note indicating it is for illustrative purposes only.

    Pistons Sleeves and Rings Kit for Allis-Chalmers WD45 D17

    Allis-Chalmers
    $445.00
    ACR1968
    Piston, sleeves, and rings kit for Allis-Chalmers WD45 and D17. Features 4-1/8" (4.125") over bore with cupped (dished) pistons.Part Number: ACR1968FitsAllis Chalmers - WD45, D17Replaces / Cross...
  • Diamond-shaped Allis-Chalmers tractor emblem with a silver background, Persian orange gear-shaped center, raised silver “A-C” and “ALLIS-CHALMERS” lettering, and a mounting hole on each side.

    Persian Orange #1 Emblem for Allis-Chalmers Steering Wheel and Front Nose

    Allis-Chalmers
    $34.00
    A9900
    Persian Orange #1 Emblem for Allis-Chalmers steering wheel and front nose applications.Die cast, chromed, painted Persian #1 background.Part Number: A9900FitsAllis Chalmers - ED40, D10, D12, D14,...
  • A front hub with 6 lug design specifically for Allis-Chalmers farm tractors, compatible with various models including D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, and 7000.

    Allis-Chalmers Front Hub 6 Lug for D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000

    Allis-Chalmers
    $94.50
    70261418
    Front Wheel Hub 6 Lug for listed Allis-Chalmers tractors and AC miscellaneous applications.Includes a 6" bolt circle and 4.620" pilot hole. For use with threaded hub cap.Part Number:...
  • A set of six metal oil pan gasket clips designed for Allis-Chalmers farm tractors, including models WC, WD, WD45, D17, 170, and 175.

    Allis-Chalmers Oil Pan Gasket Clips for WC WD WD45 D17 170 175

    Allis-Chalmers
    $9.95
    70229177
    Part Number: 70229177 Allis-Chalmers Oil Pan Gasket Clips Oil pan gasket clips for the listed Allis-Chalmers tractors. Sold as a set of 6. Fits Allis-Chalmers WC Allis-Chalmers WD Allis-Chalmers...
  • A gasket for the governor front cover of Allis-Chalmers farm tractors, specifically for models WC, WD, WD45, and D17. The gasket is gray, with four holes for bolts and a large opening to fit around the governor.

    Governor Front Cover Gasket for Allis-Chalmers WC WD WD45 D17

    Allis-Chalmers
    $8.25
    70233215
    Governor Front Cover Gasket for select Allis-Chalmers tractors.Part Number: 70233215FitsAllis Chalmers - WC, WD, WD45, WD45 Diesel, D17 (Gas & LP)Replaces / Cross...
  • Two black O-ring bearings labeled as part of a product for Allis-Chalmers farm tractors, specifically for models D17, 170, 175, 180, 185, and N7 Combine.

    O-Ring Bearing Carrier Pair for Allis-Chalmers D17 170 175 180 185 N7 Combine

    AGCO
    $9.50
    70923820
    O-Ring Bearing Carrier sold as a pair for select Allis-Chalmers tractors and combine applications.2 used per tractor.Part Number: 70923820FitsAllis Chalmers - D17, 170, 175, 180, 185, N7 Combine8050...
  • Universal Steering Joints Repair Kit for Allis-Chalmers D14, D15, D17, D19 farm tractors, designed for tractor steering systems not for automobiles.

    Universal Steering Joints Repair Kit for Allis-Chalmers D14 D15 D17 D19

    Allis-Chalmers
    $123.00
    70228906
    Universal Steering Joints Repair Kit for select Allis-Chalmers tractors.Fits 7/8" (0.875) dia shaft both ends and includes yokes, pins, and grease fitting.Part Number: 70228906FitsAllis Chalmers -...
  • Allis-Chalmers Deluxe Steering Wheel Spinner, a tractor accessory designed to be attached to farm tractors, not automobiles. It features a textured, ergonomic knob with a mounting base.

    Deluxe Steering Wheel Spinner

    Allis-Chalmers
    $17.75
    WSDX1
    Deluxe Steering Wheel Spinner for various tractor models.Part Number: WSDX1FitsAllis Chalmers - VariousAvery - VariousCase - VariousCockshutt - VariousFord - VariousIH / Farmall - VariousJohn Deere -...
  • A round, flat washer made of metal, used for Allis-Chalmers farm tractors.

    Washer, Needle & Seat Main Adjustment for Allis-Chalmers

    Allis-Chalmers
    $7.25
    70226466
    Washer for Needle & Seat Main Adjustment for select Allis-Chalmers equipment.Includes 1 washer.Part Number: 70226466FitsAllis Chalmers - WD, WD45, D15, D17, 170, 175AC Combine - EReplaces / Cross...
  • A metal link rod with hooks at both ends, designed for use with Allis-Chalmers farm tractors, specifically as a carburetor to governor link rod.

    Allis Chalmers Carburetor to Governor Link Rod

    Allis-Chalmers
    $27.25
    70237203
    Carburetor to Governor Link Rod for the listed Allis Chalmers Tractors, AC Power Units, and Gleaner models. Part Number: 70237203 Fits Allis Chalmers - WC, WF, WD, WD45, D17 (GAS, LP), (170, 175...
  • A wiring harness designed for Allis-Chalmers D17 Series I & II farm tractors. It is composed of various colorful insulated wires and connectors, arranged in a coil.

    Allis-Chalmers D17 Series I & II Wiring Harness

    Allis-Chalmers
    $289.50
    AC-3850D
    Replacement wiring harness for Allis-Chalmers D17 gas tractors. For original generator systems and supplied with light wires and instructions.Part Number: AC-3850DFitsAllis Chalmers - D17 gas (Series...
  • A set of replacement seals for the Allis-Chalmers external hydraulic lift arm cylinder, including various sizes of rubber and metal rings, arranged on a white background.

    Allis-Chalmers External Hydraulic Lift Arm Cylinder Seal Kit

    Allis-Chalmers
    $45.75
    AC-3761D
    Seal kit for Allis-Chalmers external hydraulic lift arm cylinders. Use the fitment and cylinder measurements below to verify your application before ordering.Part Number: AC-3761DFitsAllis Chalmers -...