Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers sediment bowl assembly for farm tractors, shown with metal components, a transparent bowl at the bottom, and an attached valve and brass fittings.

    Sediment Bowl Assembly for Allis-Chalmers B, C, CA, IB, RC, D14, D15, D17, D19

    Allis-Chalmers
    $29.75
    AB-092D
    Sediment Bowl Assembly for Allis-Chalmers B, C, CA, IB, RC, D14, D15, D17, and D19. Confirm the fuel bowl style and outlet before ordering.Includes a shallow bowl with a 90 degree outlet only.Part...
  • A brass fuel line compression fitting designed for Allis-Chalmers farm tractors. It connects a 5/16 inch fuel line to a 1/8 inch pipe, suitable for various model tractors.

    Fuel Line Compression Fitting 5/16" Line to 1/8" Pipe - Various Models

    Allis-Chalmers
    $3.75
    516FITTING
    Fuel line compression fitting for various Allis-Chalmers models. Connects 5/16" line to 1/8" pipe and is used on sediment bowls in most applications.Part Number: 516FITTINGFitsAllis Chalmers -...
  • Allis-Chalmers Dip Stick Gage Bushing for various tractor models including CA B C WC WF WD WD45 D10 D12 D14 D15 D17 D19, designed for farm tractors.

    Dip Stick Gage Bushing - Allis-Chalmers CA B C WC WF WD WD45 D10 D12 D14 D15 D17 D19

    Allis-Chalmers
    $28.75
    70211825
    Dip Stick Gage Bushing for listed Allis-Chalmers and AC Miscellaneous models.Part Number: 70211825FitsAllis Chalmers - CA, B, IB, C, WC, WF, WD, WD45, D10, D12, D14, D15, D17, D19AC Miscellaneous -...
  • Image of a black carburetor designed for Allis-Chalmers farm tractors like WD45 and D17, with multiple fittings and mounting points.

    Allis-Chalmers WD45 D17 Carburetor TSX464 TSX561 TSX773

    Allis-Chalmers
    $349.75
    ACR7934
    Brand new Marvel Schebler style carburetor for Allis-Chalmers WD45 and D17 up to SN 42000. Comes with a mounting gasket and the listed specifications below.Part Number: ACR7934FitsAllis Chalmers...
  • A black or dark-colored metal muffler bracket with a circular hole near the top and a rectangular slot at the bottom, designed for Allis-Chalmers farm tractors such as WC, WD, WD45, and D17.

    Muffler Bracket - Allis-Chalmers WC WD WD45 D17

    Allis-Chalmers
    $9.75
    AC-1762D
    Muffler bracket for Allis-Chalmers Styled WC, WD, WD45, and Early D17 gas.Part Number: AC-1762DFitsAllis Chalmers Styled WCAllis Chalmers WDAllis Chalmers WD45Allis Chalmers Early D17 gasB, C, CA, RC...
  • A removal tool and two bolts designed for Allis-Chalmers farm tractors, specifically the WD, WD45, and D17 models. The tool consists of a metal block with central and side holes, used for brake pin removal.

    Brake Pin Puller Removal Tool for Allis-Chalmers WD, WD45, D17

    Allis-Chalmers
    $78.75
    AC-3558D
    Brake Pin Puller Removal Tool for Allis-Chalmers WD, WD45, WD45 (diesel), and D17 (up to SN: 42000).Part Number: AC-3558DFitsAllis-Chalmers WDAllis-Chalmers WD45Allis-Chalmers WD45...
  • A metal brake band return spring with hooks on both ends, used in Allis-Chalmers farm tractors such as D17, 170, 175, 180, and 185.

    Allis Chalmers D17, 170, 175, 180, 185 Brake Band Return Spring

    Allis-Chalmers
    $7.75
    70250447
    Allis Chalmers D17, 170, 175, 180, 185Brake Band Return SpringPart Number: 70250447FitsD17170175180185Replaces / Cross Reference70250447250447Notes4 used per tractorOrdering NotesCheck
  • A coiled metal brake disc return spring with a hook at one end, designed for Allis-Chalmers farm tractors.

    Allis-Chalmers Brake Disc Return Spring

    Allis-Chalmers
    $7.75
    70250435
    Brake disc return spring for select Allis-Chalmers tractors, AC Gleaner combines, and AC miscellaneous equipment.Part Number: 70250435FitsAllis Chalmers - D17, D19, D21, 170, 175, 180, 185, 190,...
  • Allis-Chalmers Platinum Carburetor Kit for Allis Chalmers WD45 D17, includes various metal components and gaskets arranged on a surface.

    Platinum Carburetor Kit for Allis Chalmers WD45 D17

    Allis-Chalmers
    $62.75
    ACR7823
    Platinum Carburetor Kit for Allis Chalmers WD45 and D17 with Marvel Schebler carburetors.Includes repair components for the listed carburetor applications, with note to reuse the old choke shaft on...
  • A brass nozzle for Allis-Chalmers Marvel Schebler Carburetor, designed for farm tractors like WD45 and D17.

    Marvel Schebler Carburetor Nozzle for Allis Chalmers WD45 D17

    Allis-Chalmers
    $24.00
    AC47-449
    Marvel Schebler carburetor nozzle for select Allis-Chalmers tractors.Part Number: AC47-449FitsWD45D17 (All Series)Marvel Schebler carburetors: TSX561, TSX464, TSX773, TSX871Replaces / Cross...
  • A brass needle and seat assembly with a main jet, designed for Allis-Chalmers farm tractors such as WD45 and D17.

    Needle & Seat Assembly Main Jet for Allis Chalmers WD45 D17

    Allis-Chalmers
    $32.25
    AC43-671
    Needle & seat assembly main jet for select Allis-Chalmers tractors.Part Number: AC43-671FitsWD45D17 (All Series)Marvel Schebler carburetors: TSX561, TSX464, TSX773, TSX871Replaces / Cross...
  • A black gasket designed for Allis-Chalmers farm tractors, not for automobiles, suitable for brands like Allis Chalmers, International, John Deere, Massey Harris, and Minneapolis Moline.

    Gasket for Allis Chalmers, International, John Deere, Massey Harris, Minneapolis Moline

    Allis-Chalmers
    $4.00
    AB-3352D
    Gasket for select Allis-Chalmers, International, John Deere, Massey Harris, and Minneapolis Moline applications.Part Number: AB-3352DFitsAllis Chalmers - B, C, CA, D14, D17, U, WC, WD, WF (Auxiliary...
  • Dark, rusted metal flywheel ring gear for Allis-Chalmers D17, 170, and 175 farm tractors, shown as a large circular ring with teeth around its outer edge.

    Allis Chalmers Flywheel Ring Gear D17 170 175

    Allis-Chalmers
    $56.50
    70226830
    Part Number: 70226830Product OverviewFlywheel ring gear for the Allis Chalmers models listed below.FitsAllis Chalmers D17 (All Gas Models)Allis Chalmers 170 (All Gas Models)Allis Chalmers 175 (All...
  • Allis-Chalmers inner axle pinion shaft seal for D17, 170, and 175 farm tractors, part number 70232173. The round seal has a tan fibrous face, a dark central opening, and a red-brown outer rim.

    Allis-Chalmers D17 170 175 Inner Axle Pinion Shaft Seal 70232173

    Allis-Chalmers
    $31.25
    70232173
    Part Number: 70232173Inner Axle Pinion Shaft SealInner axle pinion shaft seal for listed Allis-Chalmers models.FitsAllis-Chalmers D17Allis-Chalmers 170Allis-Chalmers 175Replaces / Cross...
  • Close-up of a short, hollow bronze-colored cylindrical bushing for an Allis-Chalmers farm tractor, shown at an angle with its open end visible.

    Allis Chalmers Steering Wheel Shaft Support / Clutch Pilot Bushing

    Allis-Chalmers
    $13.50
    70228255
    Steering wheel shaft support and clutch pilot bushing for select Allis Chalmers tractors. Includes the listed applications and size specifications.Part Number: 70228255FitsAllis Chalmers - D21...
  • Circular Allis-Chalmers tractor axle seal, part 70271736, shown on a white background. The dark brown seal has a broad outer ring with a reddish edge and a recessed inner sealing lip.

    Allis-Chalmers Axle Seal Out Board of Bull Gear - 70271736

    Allis-Chalmers
    $43.75
    70271736
    Axle seal out board of bull gear for select Allis-Chalmers tractors.Part Number: 70271736FitsAllis-Chalmers D17Allis-Chalmers 170Allis-Chalmers 175Allis-Chalmers 180Allis-Chalmers 185Replaces / Cross...
  • Front crankshaft seal for Allis-Chalmers D17, 170, and 175 farm tractors. The circular seal has a red outer edge, gold-colored metal face, and black inner sealing lip.

    Front Crankshaft Seal for Allis-Chalmers D17 170 175

    Allis-Chalmers
    $11.25
    70229229
    Part Number: 70229229Front Crankshaft SealFront crankshaft seal for the listed Allis-Chalmers tractors.FitsAllis-Chalmers D17Allis-Chalmers 170Allis-Chalmers 175Replaces / Cross...
  • Flat dark gray Marvel-Schebler carburetor bowl gasket for Allis-Chalmers WD45 and D17 tractors, with a large center opening, several small holes, and a tabbed lower cutout.

    Marvel Schebler Bowl Gasket for Allis-Chalmers WD45, D17

    Allis-Chalmers
    $3.00
    70226452
    Marvel Schebler Bowl Gasket for select Allis-Chalmers and Ford carburetors.Part Number: 70226452FitsAllis Chalmers - WD45, D17Ford - 801, 901, 4000 (1958-1964)Replaces / Cross...