Same Day Shipping On 99% Of Orders

Allis Chalmers D10 Tractor Parts

Allis-Chalmers D10 tractor in a field

About the Allis-Chalmers D10

The Allis-Chalmers D10 was introduced in 1959 as one of the smaller tractors in the D Series. It followed the Model B and gave smaller farms a newer row-crop tractor with more power, a four-speed transmission, and an adjustable front axle.

Early D10 tractors used a 138.7-cubic-inch four-cylinder gasoline engine. The larger 149-cubic-inch engine was introduced at serial number 3501. The D10 went through Series I, II, and III updates and remained in production through 1968.

Serial Number Reference

Serial number locations: The tractor serial number is stamped into the flange where the engine and transmission meet on the left side of the tractor. On earlier D10 models, the engine serial number is on the rear left-hand side of the engine block behind the carburetor. On Series III models, it is on the rear left-hand flange of the engine block.

The table below shows the beginning tractor serial number for each Model D10 year and series:

 

1959-1961
Model D10 year Beginning serial number
1959 - Series I 1,001
1960 - Series I 1,950
1961 - Series I 2,801
1962-1964
Model D10 year Beginning serial number
1962 - Series I 4,511
1963 - Series II 6,801
1964 - Series II 7,675
1964 - Series III 9,001
1965-1968
Model D10 year Beginning serial number
1965 - Series III 9,204
1966 - Series III 9,486
1967 - Series III 9,795
1968 - Series III 9,979

Total production: 9,100 Model D10 tractors.

The final D10 serial number was 10,100.

Allis-Chalmers D10 Paint Reference

For restoration planning, the Allis-Chalmers D10 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D10 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Aluminum with Black trim grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Filter By

Sort By:

Display Type:
Filters
  • A complete seat assembly designed for Allis-Chalmers farm tractors, featuring black and white colored upholstery with a cushioned seat and backrest.

    Allis Chalmers Complete Seat Assembly

    Allis-Chalmers
    $365.00
    DJS221
    Complete seat assembly for select Allis Chalmers tractors. Includes a metal seat pan and seat cushions with wood backing.This seat assembly is a great seat option at a fraction of the cost.Part...
    Add to Cart
  • Allis-Chalmers Clutch Alignment Tool specifically designed for Allis-Chalmers B, C, CA, IB, D10, D12, D14, D15 farm tractors. It is a black cylindrical tool used for aligning the clutch in these vintage tractors.

    Clutch Alignment Tool for Allis-Chalmers B, C, CA, IB, D10, D12, D14, D15

    Allis-Chalmers
    $18.75
    1212-1600
    Clutch alignment tool for Allis-Chalmers B, C, CA, IB, D10, D12, D14, and D15. 10 spline.Part Number: 1212-1600FitsAllis-Chalmers BAllis-Chalmers IBAllis-Chalmers CAllis-Chalmers CAAllis-Chalmers...
    Add to Cart
  • A cylindrical clutch pilot bushing for Allis-Chalmers farm tractors, suitable for models D10, D12, and D14. It appears to be made of bronze or a similar metal.

    Clutch Pilot Bushing for Allis-Chalmers D10, D12, D14

    Allis-Chalmers
    $13.50
    70228188
    Clutch pilot bushing for Allis-Chalmers tractors. Check the fitment details below to confirm your application.Part Number: 70228188FitsAllis Chalmers D10 (Up to SN 3501)Allis Chalmers D12 (Up to SN...
    Add to Cart
  • Allis-Chalmers Rear Crankshaft Seal D10 D12 D14 D15, image of a black rubber rear crankshaft seal for Allis-Chalmers tractors.

    Allis Chalmers Rear Crankshaft Seal D10 D12 D14 D15

    Allis-Chalmers
    $24.75
    AB-2000D
    Rear crankshaft seal for listed Allis Chalmers tractor and equipment applications.Part Number: AB-2000DFitsAllis Chalmers - D10, D12, D14, D15, I40, I400, I60 (Gas & LP), Crawler: H3 (Gas & LP),...
    Add to Cart
  • An aftermarket inline fuel filter with two black rubber hoses, two metal clamps, and a metal housing, designed for Allis-Chalmers farm tractors.

    Inline Fuel Filter 33033

    Allis-Chalmers
    $8.75
    33033
    Part Number: 33033Inline Fuel FilterIn-line fuel filter for use with 3/8" fuel lines. Includes hose and clamps and is Used to help keep rust and dirt out of the carburetor.FitsAllis Chalmers -...
    Add to Cart
  • Allis-Chalmers Tube 4.00, 5.00, 5.50 X 15" tire tube, black rubber inner tube for tractor or machinery wheel.

    Tube 4.00, 5.00, 5.50 x 15 for Allis-Chalmers

    Allis-Chalmers
    $18.00
    WH-053D
    New tube for 4.00, 5.00, 5.50 x 15" tires. Fitment is listed for Allis-Chalmers and several other tractor brands.Part Number: WH-053DFitsAllis ChalmersAveryCaseCockshuttIH / FarmallJohn DeereMassey...
    Add to Cart
  • Allis-Chalmers Pinion Shaft 3rd Gear CA D10 D12 D14 D15, metal gear component for agricultural machinery.

    Allis Chalmers Pinion Shaft 3rd Gear CA D10 D12 D14 D15

    Allis-Chalmers
    $199.75
    AC-285D
    Pinion shaft 3rd gear for late Allis Chalmers CA, D10, D12, D14, and D15 tractors.For tractors below the serial numbers listed, you must also order AC-282D reverse gear.Part Number: AC-285DFitsLate...
    Add to Cart
  • Allis-Chalmers Allis Chalmers B CA C D10 D12 Stainless Steel Muffler Restoration Quality

    Allis-Chalmers B CA C D10 D12 Stainless Steel Muffler

    Allis-Chalmers
    $134.75
    AC-3168D
    Stainless steel muffler for Allis-Chalmers B, CA, C, D10, and D12 tractors with thru-the-hood mufflers. Finish is polished stainless steel.Part Number: AC-3168DFitsAllis Chalmers - D10, D12Allis...
    Add to Cart
  • Allis-Chalmers Front Wheel Bearing Seal (OEM) BRAND Allis Chalmers B C CA D10 D12 70207365 207365

    Front Wheel Bearing Seal for Allis Chalmers B C CA D10 D12

    Allis-Chalmers
    $33.25
    70207365
    Front wheel bearing seal for select Allis Chalmers models. AGCO brand steel & felt seal with measurements listed below.Part Number: 70207365FitsAllis Chalmers: B, C, CA, D10, D12Replaces / Cross...
    Add to Cart
  • Allis-Chalmers Allis Chalmers D10 D12 Radiator (OEM Quality)

    Allis Chalmers D10 D12 Radiator

    Allis-Chalmers
    $409.00
    ACR4519
    OEM Quality Radiator for Allis Chalmers D10 and D12.Part Number: ACR4519FitsAllis Chalmers D10Allis Chalmers D12SpecsOverall Height: 20 1/4"Overall Width: 15 3/4"Core Depth: 1 3/4"3 Rows of Tubes8...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Metal Seat Pan - D10 D12 D14 D15 D17 D19 D21 170 175 180 185 190 190XT 210 220

    Allis Chalmers Metal Seat Pan for D10, D12, D14, D15, D17, D19, D21

    Allis-Chalmers
    $188.00
    KM7539
    Allis Chalmers metal seat pan for select tractor models. Made in the USA with a steel frame and restoration-quality construction.Part Number: KM7539FitsD10D12D14D15D17D19D21Also fits 170, 175, 180,...
    Add to Cart
  • Allis-Chalmers HOT Coil, 55000-Volts, 12V high-voltage coil for industrial or agricultural equipment, shown with mounting bolts on a beige top plate.

    Allis-Chalmers HOT Coil 55000-Volts 12V AB-348D

    Allis-Chalmers
    $59.75
    AB-348D
    Allis-Chalmers HOT Coil 55000-Volts 12V AB-348D12V high-voltage coil for applications listed below. For faster starting, reduced plug fouling, and longer plug life.Important: Must use with AB-366D...
    Add to Cart
  • Allis-Chalmers Allis Chalmers Battery Box Side - DJS063S, rectangular metal panel with a small hole in the top right corner for mounting.

    Allis Chalmers Battery Box Side - DJS063S

    Allis-Chalmers
    $49.00
    DJS063S
    OverviewUSA made battery box side for Allis Chalmers tractors. Part Number: DJS063S.FitsAllis Chalmers BAllis Chalmers GAllis Chalmers CAllis Chalmers CAAllis Chalmers D10Allis Chalmers D12Allis...
    Add to Cart
  • Allis-Chalmers Zenith Main Jet Adjusting Needle Assembly - AB-564D

    Zenith Main Jet Adjusting Needle Assembly

    Allis-Chalmers
    $27.75
    AB-564D
    Zenith main jet adjusting needle assembly for select tractor models and listed Zenith carburetors.Part Number: AB-564DFitsAllis Chalmers: Some WC, WF, WD, D10, D12Case: Some C, CC, D, DC, DI, DO, DV,...
    Add to Cart
  • Allis-Chalmers Universal Oil Pressure Gauge (0-50 LB) - AB-082D

    Universal Oil Pressure Gauge 0-50 LB

    Allis-Chalmers
    $21.75
    AB-082D
    Universal oil pressure gauge with a 0-50 LB range and the applications listed below. Black face with white letters, chrome bezel, and no logo.Part Number: AB-082DFitsAllis Chalmers - WD45 Dsl, D10,...
    Add to Cart
  • Allis-Chalmers OIL GAUGE FITTING

    OIL GAUGE FITTING

    Allis-Chalmers
    $13.75
    5220K31
    Oil gauge fitting for the applications listed below. Brass fitting for models using 1/8" oil line and made in the USA.Part Number: 5220K31FitsAllis ChalmersCaseCockshuttFordIH / FarmallJohn De
    Add to Cart
  • Allis-Chalmers Tractor Serial Numbers 1940-1975 Manual, book cover with tractor illustration and list of manufacturers.

    Tractor Serial Numbers 1940-1975 Manual

    Allis-Chalmers
    $9.00
    MAN072D
    Tractor serial numbers reference for 1940-1975 models.Use this manual to find serial number information for Allis-Chalmers and other listed brands.Part Number:...
    Add to Cart
  • Allis-Chalmers Starter to Switch Cable, Eyelets at Both Ends, red and silver electrical cable for machinery.

    Starter to Switch Cable, Eyelets at Both Ends

    Allis-Chalmers
    $16.75
    AB-1582D
    Starter to switch cable with eyelets at both ends. New part for various Allis-Chalmers, Case, Cockshutt, Ford, International, John Deere, Massey Ferguson, Massey Harris, Minneapolis Moline, and...
    Add to Cart