Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Black circular split lock ring for the headlight of late Allis-Chalmers D10, D12, D15, D17, and D19 farm tractors, shown on a white background.

    Headlight Lock Ring for Late Allis Chalmers D10, D12, D15, D17, D19

    Allis-Chalmers
    $12.75
    70236353
    Replacement headlight lock ring for fender mounted headlights. Sold individually.Part Number: 70236353FitsAllis Chalmers late D10Allis Chalmers late D12Allis Chalmers late D15Allis Chalmers late...
  • Allis-Chalmers governor weight pin with two retaining clips, shown separately on a white background.

    Allis Chalmers Governor Weight Pin for D17 WC WD WD45 WF 170 175

    Allis-Chalmers
    $8.75
    AC-319D
    Governor weight pin for Allis Chalmers tractors.Fits D17, WC, WD, WD45, WF, 170, and 175 with 4 cylinder 201 or 226 cubic inch gas engines.Part Number: AC-319DReplaces / Cross ReferenceClip:...
  • Metal Allis-Chalmers governor weight for D17, WC, WD, WD45, WF, 170, and 175 farm tractors, shown against a white background.

    Allis Chalmers Governor Weight for D17 WC WD WD45 WF 170 175

    Allis-Chalmers
    $29.75
    AC-318D
    Governor weight for Allis Chalmers tractors.Fits D17, WC, WD, WD45, WF, 170, and 175 with 4 cylinder gas and 201 or 226 cubic inch engines.Part Number: AC-318DReplaces / Cross...
  • Metal Allis-Chalmers governor gear for D17, 170, and 175 farm tractors, shown at an angle with its toothed rim and central hub.

    Allis Chalmers Governor Gear for D17 170 175

    Allis-Chalmers
    $149.75
    AC-317D
    27 teeth governor gear.Fits Allis Chalmers D17, 170, and 175 with 4 cylinder gas and 226 cubic inch engine.Part Number: AC-317DReplaces / Cross Reference22951070229510Casting Number: AM4479FitsAC...
  • Black 19-inch cushion pad for an Allis-Chalmers farm tractor seat, with a smooth vinyl surface, raised padded edges, and a contoured center.

    Black Tractor Seat Pad Cushion 19"

    Allis-Chalmers
    $39.50
    YF30BLK
    This black tractor seat pad cushion is for tractors with a round pan seat. It fits a 19" to 21" seat pan side to side and uses a drawstring attachment.Part Number: YF30BLKFitsAllis Chalmers - B, C,...
  • Orange and white 19-inch seat cushion pad for an Allis-Chalmers farm tractor, shown on a white background.

    Orange and White Tractor Seat Pad Cushion 19"

    Allis-Chalmers
    $39.50
    YF30WO
    This orange and white tractor seat pad cushion is for tractors with a round pan seat. It fits a 19" to 21" seat pan side to side and uses a drawstring attachment.Part Number: YF30WOFitsAllis Chalmers...
  • Pertronix 12-volt electronic ignition conversion kit for Allis-Chalmers farm tractors, shown with a circular ignition module plate, red and black wires, terminal connectors, and black rubber components on a white background.

    Electronic Ignition Conversion Kit 12V for Allis Chalmers B, IB, C, CA, D10, D12, D14, D15, D17, G, WC, WD, WD45, WF

    Pertronix
    $191.50
    ACR3189
    Ignitor Delco fits 4-cylinder applications with 12 volt negative ground. This electronic ignition conversion kit replaces points and condenser with a breakerless solid state system. It fits entirely...
  • Black 2-1/8-inch NBR sediment bowl gasket for Allis-Chalmers and other farm tractors, shown as a flat circular ring with a large center opening on a white background.

    2-1/8" Sediment Bowl Gasket (NBR) - Allis Chalmers, Case, Cockshutt, International, John Deere, Massey Ferguson, Oliver, White

    Allis-Chalmers
    $2.50
    70208137
    Note: 2-1/8" sediment bowl gasket made from Nitrile butadiene rubber (NBR).Part Number: 70208137FitsAllis Chalmers 190XTAllis Chalmers D15 (Gas models with SN: 9001 & up and all Dsl models)Allis...
  • Allis-Chalmers Round Radiator Mounting Pad - Allis-Chalmers, Ford, circular black rubber radiator mounting pad with central hole.

    Round Radiator Mounting Pad - Allis-Chalmers, Ford

    Allis-Chalmers
    $4.25
    DJS455
    Round radiator mounting pad for select Allis-Chalmers and Ford tractors.Use the fitment and replacement references below to verify application before ordering.Part Number: DJS455FitsAllis Chalmers -...
  • Circular pinion shaft axle oil seal for Allis-Chalmers WD, WD45, D17, 170, 175, 180, and 185 farm tractors, with a gold-tone metal outer casing and black rubber inner sealing lip.

    Allis-Chalmers WD WD45 D17 170 175 180 185 Pinion Shaft Axle Oil Seal

    Allis-Chalmers
    $15.65
    70218450
    Part Number: 70218450Allis-Chalmers Pinion Shaft Axle Oil SealPinion shaft axle oil seal for listed Allis-Chalmers tractors.FitsAllis Chalmers - WD, WD45, D17, 170, 175, 180, 185Replaces / Cross...
  • Assortment of vinyl decals for an Allis-Chalmers D17 Series IV farm tractor, including long silver-and-chrome “D17,” “Allis-Chalmers,” and “Series IV” decals, an Allis-Chalmers logo, warning labels, a control diagram, and gold instruction strips, arranged on a white background.

    Allis Chalmers D17 Series IV Gas Vinyl Decal Set with Chrome

    Allis-Chalmers
    $352.00
    DJS204
    Part Number: DJS204Allis Chalmers D17 Series IV Gas Vinyl Decal SetVinyl decal set for Allis Chalmers D17 Series IV Gas models with chrome on decals.FitsAllis Chalmers D17 Series IV Gas...
  • Replacement Viton needle float valve and threaded brass seat with copper-colored gasket and metal retaining clip for Marvel-Schebler carburetors on Allis-Chalmers farm tractors.

    Viton Needle Float Valve & Seat - Marvel Schebler Carburetors

    Allis-Chalmers
    $8.00
    AB-133D
    Viton needle float valve & seat for Marvel Schebler carburetors.Part Number: AB-133DFitsAllis Chalmers WD45Allis Chalmers D15 (Sn# 9001-Up)Allis Chalmers D17Allis Chalmers D19Allis Chalmers 170Allis...
  • Black five-blade fan for an Allis-Chalmers farm tractor, shown against a white background.

    Allis Chalmers 5 Blade Fan

    Allis-Chalmers
    $98.50
    70240973
    Allis Chalmers 5 blade fan for listed gas and diesel models.Part Number: 70240973FitsAllis Chalmers D17 (Gas & Dsl)Allis Chalmers D19 (Gas & Dsl)Allis Chalmers WCAllis Chalmers WD45 (Gas & Dsl)Allis...
  • Black, flat Allis-Chalmers right-hand side panel for D19 Gas and D17 Series IV Gas farm tractors, with multiple mounting holes and shaped notches.

    Allis-Chalmers RH Side Panel for D19 Gas, D17 Series IV Gas

    Allis-Chalmers
    $105.00
    70240022
    Right-hand side panel for select Allis-Chalmers tractors.Right hand side panel comes primered.Part Number: 70240022FitsD19 GasD17 Series IV GasReplaces / Cross Reference70240022240022NotesPrimered.
  • Round Allis-Chalmers water temperature gauge for D15, D17, and D19 farm tractors, with a metal bezel, white face, needle, and colored temperature scale marked 160 and 220.

    Temperature Gauge for Allis-Chalmers D15, D17, D19

    Allis-Chalmers
    $209.00
    70231378
    Temperature gauge for Allis-Chalmers D15 gas, D17, and D19 gas tractors.Replacement numbers include 70231378 and 231378.Part Number: 70231378FitsAllis-Chalmers D15 GasAllis-Chalmers D17Allis-Chalmers...
  • Gray metal snap ring for an Allis-Chalmers farm tractor front spindle, shown flat against a white background. The circular ring has a gap at the bottom with two inward-pointing ends.

    Allis Chalmers Front Spindle Snap Ring

    Allis-Chalmers
    $8.50
    70227827
    Allis Chalmers front spindle snap ring for select tractors and Gleaner combines.Part Number: 70227827FitsAllis Chalmers D14Allis Chalmers D15Allis Chalmers D17Allis Chalmers D19Allis Chalmers...
  • Black 2-inch circular NBR gasket for an Allis-Chalmers farm tractor sediment bowl, shown alone against a white background.

    2" Sediment Bowl Gasket (NBR)

    Allis-Chalmers
    $1.70
    70208362
    2" sediment bowl gasket made from nitrile butadiene rubber (NBR).Part Number: 70208362FitsAllis Chalmers - B, C, CA, G, D10, D12, D14, D15 (Gas To Sn# 9000), D17 (Gas To Sn# 42000), I40, I400, I60,...
  • A two-position push-pull ignition and light switch for an Allis-Chalmers farm tractor, shown isolated on a white background. It has a rectangular metal housing, exposed electrical terminals on top, and a yellow pull knob on a threaded shaft.

    Universal 2 Position Push Pull Ignition Light Switch

    Allis-Chalmers
    $7.50
    SSW2809
    Universal 2 position push/pull switch for ignition or light use. It is non-fused and includes a plastic knob. Part Number: SSW2809 Fits Allis Chalmers - Various Case - Various Cockshutt -...