Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Two silver-gray halves of a standard connecting rod bearing for Allis-Chalmers farm tractors, shown separated and curved into open semicircles.

    Standard Connecting Rod Bearing for Allis-Chalmers D17, WD, WD45, 170, 175, WC, WF

    Allis-Chalmers
    $14.25
    AC-2490D
    Standard connecting rod bearing for Allis-Chalmers applications listed below. Sold per journal.Part Number: AC-2490DFitsAllis Chalmers D17, WD, WD45, 170, 175 (gas, LP with G201, G226 engines)Allis...
  • Allis-Chalmers Connecting Rod Bearing, .010 Undersize, for Allis-Chalmers engines, close-up view of metal engine part

    Connecting Rod Bearing .010 Undersize for Allis-Chalmers

    Allis-Chalmers
    $18.75
    AB-2498D
    Connecting rod bearing .010 undersize for the Allis-Chalmers applications listed below. For 0.010" (1.988") undersize rod journal. Priced and sold per journal.Part Number: AB-2498DFitsAllis Chalmers...
  • Allis-Chalmers Standard Connecting Rod Bearing for Allis-Chalmers Diesel, silver metal bearing with a circular shape and a cutout section

    Standard Connecting Rod Bearing for Allis-Chalmers Diesel

    Allis-Chalmers
    $18.75
    AB-2495D
    Standard connecting rod bearing for Allis-Chalmers diesel applications and other listed models. Preserve the supplied application details carefully.Part Number: AB-2495DFitsAC Combines - Gleaner: F...
  • A single long, black Allis-Chalmers tractor engine pushrod with a narrow cylindrical shaft and a wider rounded cap at one end, shown diagonally on a white background.

    Pushrod for Allis-Chalmers D17, WC, WD, WD45, WF, 170, 175

    Allis-Chalmers
    $29.75
    AC-2415D
    Pushrod sold individually for Allis-Chalmers D17, WC, WD, WD45, WF, 170, 175.Also used on Combines, Cotton Pickers, Motor Graders, Loaders, Speed Patrol, and Power Units listed below.Part Number:...
  • Long, narrow brown rectangular valve cover gasket with rounded corners, shown diagonally on a white background; for Allis-Chalmers D17 Diesel, WD45 Diesel, and D19 farm tractors.

    Valve Cover Gasket for Allis-Chalmers D17 Diesel, WD45 Diesel, D19

    Allis-Chalmers
    $29.75
    AB-2589D
    Valve cover gasket for listed Allis-Chalmers, Cockshutt, and other applications. Condition: New.Part Number: AB-2589DFitsAllis Chalmers - D17 Diesel, WD45 (Dsl), D19 (Gas and Dsl)Allis Chalmers...
  • Two black sleeve-sealing O-rings for Allis-Chalmers WD, WD45, WF, WC, D17, 170, and 175 farm tractors, overlapping on a white background.

    Allis-Chalmers Sleeve Sealing O Rings for WD, WD45, WF, WC, D17, 170, 175

    Allis-Chalmers
    $8.25
    AC-2113D
    Allis-Chalmers Sleeve Sealing O Rings for 1 cylinder applications.Fits the models and engine applications listed below. Replacement for 70207436 and 70227500.Part Number: AC-2113DFits170175D17WC — SN...
  • Allis-Chalmers 4-cylinder tractor piston ring set, with 16 dark metal rings arranged in four columns of four on a white background.

    Allis-Chalmers Piston Ring Set 4-Cylinder

    Allis-Chalmers
    $79.75
    AB-2090D
    Part Number: AB-2090DAllis-Chalmers Piston Ring SetFor select Allis-Chalmers, Case, and International 4-cylinder applications. Measure old rings before ordering to confirm the correct set.FitsAllis...
  • Illustrative image of assorted dark and silver piston rings arranged in several overlapping stacks. Text on image reads “FOR ILLUSTRATIVE PURPOSES ONLY.” Product: Allis-Chalmers four-cylinder piston ring set for some 170, 175, D17, WC, WD, WD45, and WF farm tractors.

    Allis-Chalmers Piston Ring Set 4-Cylinder SOME 170, 175, D17, WC, WD, WD45, WF

    Allis-Chalmers
    $146.75
    AB-2082D
    Part Number: AB-2082DAllis-Chalmers Piston Ring SetFor select Allis-Chalmers, Case, International, and Massey Harris applications with 4" bore. Includes the listed compression and oil ring dimensions...
  • Allis-Chalmers four-cylinder tractor piston ring set arranged in overlapping groups, with black, silver, and segmented rings. Labeled for D17, D270, WC, WD, WD45, WF, 170, and 175 farm tractors; image marked “For illustrative purposes only.”

    Allis-Chalmers Piston Ring Set 4-Cylinder D17, D270, WC, WD, WD45, WF, 170, 175

    Allis-Chalmers
    $139.75
    AB-2076D
    Part Number: AB-2076DAllis-Chalmers Piston Ring SetFor select Allis-Chalmers 4-cylinder applications with 4" bore. Includes (3) 0.125" compression rings and (1) 0.250" oil ring for the listed models...
  • Allis-Chalmers large brake riveting tool for farm tractors, featuring a heavy black C-shaped frame with a threaded opening in the upper block and two separate cylindrical pins beside it, shown on a white background.

    Large Brake Riveting Tool

    Allis-Chalmers
    $99.75
    MI-2547D
    Large brake riveting tool for various tractor applications. Includes the listed punches and dimensions.Part Number: MI-2547DFitsAllis Chalmers - various models - Use for ACR3539Case - various...
  • Black threaded exhaust pipe for Allis-Chalmers D17, 170, and 175 farm tractors, shown diagonally with its hollow opening and external threads visible.

    Threaded Exhaust Pipe for D17 170 175

    Allis-Chalmers
    $13.75
    AC-1875D
    Threaded exhaust pipe for listed Allis Chalmers models. New part with threaded connection and stated length.Part Number: AC-1875DFitsAllis Chalmers - D17 (Series III/IV - Gas/LP SN: 32001 & up), 175,...
  • Black rubber dust unloader valve for an Allis-Chalmers farm tractor dry air cleaner, shown upright against a white background.

    Dust Unloader Valve for Dry Air Cleaner

    Allis-Chalmers
    $18.00
    AB-2443D
    Dust Unloader Valve (Vacuator Valve) for Dry Air Cleaner. New part with listed tractor and equipment applications.Part Number: AB-2443DFitsAllis Chalmers - D15 (Diesel, w/ dry air cleaner), D17 (Gas,...
  • Allis-Chalmers Distributor Hold Down Clamp, a metallic mechanical component used for securing distributor assemblies in agricultural or industrial machinery.

    Distributor Hold Down Clamp

    Allis-Chalmers
    $7.75
    AB-2523D
    Distributor hold down clamp for Delco distributor applications. Sold individually and used 2 per engine.Part Number: AB-2523DFitsAllis Chalmers - B, C, CA, D10, D12, D14, D15, D17, IB, WC, WD, WD45,...
  • Bright orange, rounded Allis-Chalmers farm tractor seat cushion with a raised padded rim and smooth center, shown against a white background.

    Orange Tractor Seat Pad Cushion 19"

    Allis-Chalmers
    $39.75
    YF30ORG
    Orange tractor seat pad cushion with drawstring. Fits listed Allis-Chalmers, Case, and Cockshutt tractors with round pan seats.Part Number: YF30ORGFitsAllis Chalmers - B, C, CA, D10, D12, D14, D15,...
  • Black circular clutch throw-out bearing for an Allis-Chalmers farm tractor, shown at an angle against a white background.

    Clutch Throw Out Bearing - Allis Chalmers, International

    Allis-Chalmers
    $47.75
    AB-1928D
    Clutch throw out bearing for select Allis Chalmers and International applications, with listed dimensions preserved exactly as supplied.Part Number: AB-1928DFitsAllis Chalmers - B, IB (Using 8 1/2"...
  • Dark gray cast-iron brake drum for Allis-Chalmers D17, WD, and WD45 farm tractors, shown from above at an angle with a raised central hub and circular bore.

    Brake Drum for Allis Chalmers D17 WD WD45

    Allis-Chalmers
    $99.75
    AC-1995D
    Brake drum for select Allis Chalmers D17, WD, and WD45 applications.Part Number: AC-1995DFitsAllis Chalmers - D17 (Up to SN: 42000), WD, WD45 (Gas & Diesel)Replaces / Cross Reference70232585,...