Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Round Allis-Chalmers ammeter gauge for farm tractors, marked AMPERES with a 60-0-60 scale, negative and positive indicators, and a central needle at zero.

    OEM Allis Chalmers Ammeter Gauge 60-0-60

    AGCO
    $44.50
    70254407
    OEM AGCO ammeter gauge marked Amperes 60-0-60 for listed Allis Chalmers tractors and power units.Part Number: 70254407FitsAllis Chalmers D10Allis Chalmers D12Allis Chalmers D14Allis Chalmers D15Allis...
  • Allis-Chalmers Tractor Parts Catalog 2025, vintage farm tractor parts catalog cover with sunset landscape background.

    Allis Chalmers Tractor Parts Catalog

    Allis-Chalmers
    $0.00
    0000
    The Allis Chalmers Tractor Parts Catalog (2025) is a comprehensive parts guide for Allis Chalmers tractors. It is available as a hard copy and as a printable PDF catalog. Part Number: 0000 Current...
  • Allis-Chalmers farm tractor steering shaft cross-and-bearing U-joint assembly, shown with four bearing caps, four retaining clips, and a grease fitting.

    Steering Shaft Cross and Bearing U-Joint for Allis-Chalmers

    Allis-Chalmers
    $17.75
    AB-2507D
    Allis Chalmers - D14, D15, D17, D19, RC, WC, WF (when using later style steering joint # 224825), WD, WD45 (dsl); Replacement for: 70224890, 224890 Case - 200B, 210B, 211B, 300B, 301B, 302B, 310B,...
  • Flat dark brown gasket for an Allis-Chalmers farm tractor water manifold to cylinder head, with a large rectangular center opening and one round bolt hole at each end.

    Water Manifold to Cylinder Head Gasket for Allis-Chalmers

    Allis-Chalmers
    $7.50
    70233218
    Water Manifold to Cylinder Head Gasket for Allis-Chalmers applications listed below.Part Number: 70233218FitsWD, WD45 (Gas, LP), WC, WF, D17, 170, 175AC Combine - E Combine, K SeriesAC Powerunit -...
  • Red cylindrical Baldwin hydraulic filter for Allis-Chalmers farm tractors, with black installation pictograms printed on the side.

    Hydraulic Filter for Allis-Chalmers D15 D17 D19 D21 180 185 190 190XT

    Baldwin
    $16.00
    70239930
    Hydraulic Filter for Allis-Chalmers D15, D17, D19, D21, 180, 185, 190, and 190XT.Also fits the 860 Cotton Stripper (1978) with diesel engine (590577-4302 - 9999), 82 SH Side Mounted Mower, and I40 /...
  • Three metal camshaft bearing bushings for Allis-Chalmers D17, 170, 175, WC, WD, WD45, and WF farm tractors.

    Camshaft Bearing Bushing Set for Allis-Chalmers D17 170 175 WC WD WD45 WF

    Allis-Chalmers
    $42.75
    AC-2761D
    Camshaft Bearing (bushing) Set for Allis-Chalmers D17, 170, 175, WC, WD, WD45, and WF applications.This is a 3 piece set.Part Number: AC-2761DFitsD17 (gas, LP; SN: 19978 and up)170, 175 (gas,...
  • Coiled Allis-Chalmers D17 Series IV complete wiring harness kit, with multicolored wires, black protective wrapping, and white labeled connectors, shown on a plain white background.

    Complete Wiring Harness Kit for Allis Chalmers D17 Series IV

    Allis-Chalmers
    $282.75
    AC-2873D
    Allis Chalmers complete wiring harness kit for D17 Series IV gas tractors with generator and SN: 75001 and up.Part Number: AC-2873DFitsD17 (gas; series IV; SN: 75001 and up; with generator)Replaces /...
  • Long metal brake and clutch pedal shaft for an Allis-Chalmers WD or WD45 farm tractor, shown diagonally on a white background.

    Brake and Clutch Pedal Shaft for Allis Chalmers WD, WD45

    Allis-Chalmers
    $59.75
    AC-2678D
    Part Number: AC-2678DBrake and Clutch Pedal ShaftBrake and clutch pedal shaft for Allis-Chalmers WD and WD45 tractors.FitsAllis Chalmers WDAllis Chalmers WD45Allis Chalmers WD45 (Diesel)Replaces /...
  • Allis-Chalmers side nameplate fastener set for farm tractors, with silver dome-head rivets and black steel clips arranged on a white background.

    Allis-Chalmers Side Nameplate Rivets & Steel Clips Set

    Allis-Chalmers
    $19.75
    DJS015
    Part Number: DJS015Allis-Chalmers Side Nameplate Rivets & Steel Clips SetSet includes 14 aluminum rivets and 14 steel clips. For select Allis-Chalmers tractor side nameplates...
  • Allis-Chalmers tractor side-nameplate hardware set, with silver domed rivets arranged beside round stainless retaining clips on a white background.

    Allis Chalmers Side Nameplate Rivets & Stainless Clips Set

    Allis-Chalmers
    $24.75
    DJS016
    Allis Chalmers side nameplate rivets and stainless clips set for select models.Part Number: DJS016FitsD10D12D14D15D17I40I400I60I600Specs14 aluminum rivets14 stainless steel clips
  • Black circular oil seal for Allis-Chalmers WD45 Diesel, D15 Diesel, D17 Diesel, and D19 farm tractors, shown against a white background.

    Allis-Chalmers WD45 Diesel, D15 Diesel, D17 Diesel, D19 Oil Seal

    Allis-Chalmers
    $30.00
    74502930
    Engine flywheel oil seal for the listed Allis-Chalmers models.Part Number: 74502930FitsAllis-Chalmers WD45 DieselAllis-Chalmers D15 DieselAllis-Chalmers D17 DieselAllis-Chalmers D19 GasAllis-Chalmers...
  • Cream-colored metal tractor seat pan for Allis-Chalmers D10, D12, D14, D15, D17, D19, and D21 farm tractors.

    Allis Chalmers Metal Seat Pan for D10, D12, D14, D15, D17, D19, D21

    Allis-Chalmers
    $188.00
    KM7539
    Allis Chalmers metal seat pan for select tractor models. Made in the USA with a steel frame and restoration-quality construction.Part Number: KM7539FitsD10D12D14D15D17D19D21Also fits 170, 175, 180,...
  • Six long dark steel manifold studs for Allis-Chalmers Late D17, 170, and 175 farm tractors, arranged upright on a white background; three brass nuts are fitted to the upper ends and three additional brass nuts sit near the bottom.

    Allis Chalmers Late D17 170 175 Manifold Stud Set w/ Brass Nuts

    Allis-Chalmers
    $49.50
    AC1872
    Manifold stud set with brass nuts for Allis-Chalmers Late D17, 170 Gas, 175 Gas, and G-226 applications. New 6-piece set.Part Number: AC1872FitsAllis Chalmers Late D17Allis Chalmers 170 GasAllis...
  • Six black double-ended manifold studs with wrench flats, shown beside six brass-colored hex nuts on a white background. For Allis-Chalmers WC, WD, WD45, and early D17 farm tractors.

    Allis Chalmers WC WD WD45 Early D17 Manifold Stud Set

    Allis-Chalmers
    $42.50
    AC217
    Part Number: AC217Manifold Stud Set with Brass NutsFor Allis-Chalmers WC, WD, WD45, and Early D17 models. New condition.FitsAllis-Chalmers WCAllis-Chalmers WDAllis-Chalmers WD45Allis-Chalmers Early...
  • One-quart can of Northern Fuel Tank Liner, a gas tank sealer for Allis-Chalmers farm tractors. The can has a blue-and-white label with yellow lettering and a silver metal lid.

    Gas Tank Sealer - 1 Quart Can

    Allis-Chalmers
    $69.99
    ACR2043
    Gas tank sealer in a 1 quart can.Part Number: ACR2043FitsAllis-Chalmers - VariousCase - VariousCockshutt - VariousFord - VariousInternational - VariousJohn Deere - VariousMassey Ferguson -...
  • Black rubber upper radiator hose for Allis-Chalmers D17 Diesel and WD45 Diesel farm tractors, shown alone against a white background.

    Allis Chalmers Upper Radiator Hose for D17 Diesel, WD45 Diesel

    Allis-Chalmers
    $9.00
    70226893
    Upper radiator hose for the Allis Chalmers models listed below.Sold individually; 2 used per tractor.Part Number: 70226893FitsAllis Chalmers D17 DieselAllis Chalmers WD45 DieselReplaces / Cross...
  • Allis-Chalmers D Series 3-3/8 Inch Nickel Plated Hole Plug 71995k86, image showing a metal hole plug with a screw and a mounting bracket.

    Allis Chalmers D Series 3-3/8 Inch Nickel Plated Hole Plug 71995k86

    Allis-Chalmers
    $12.00
    71995k86
    Nickel plated 3-3/8 inch snap-in hole plug for Allis Chalmers D Series tractors.Part Number: 71995k86FitsAllis Chalmers D Series TractorsSpecs3-3/8 inchNotesTachometer gauge hole.
  • Allis-Chalmers 2 inch Snap-In Hole Plug, Nickel Plated, with one side showing the plug's detailed edge and the other side showing a smooth, metallic surface.

    Allis Chalmers 2" Snap-In Hole Plug, Nickel Plated

    Allis-Chalmers
    $3.00
    9563K54
    Allis Chalmers D Series tractors 2 inch snap-in hole plug in nickel plated finish.Use this plug to cover oil, amp meter, temperature, and traction booster gauge holes.Part Number: 9563K54FitsD Series...