Same Day Shipping On 99% Of Orders

Allis Chalmers D17 Tractor Parts

About the Allis-Chalmers D17

Introduced in 1957, the D17 moved the D Series into the larger row-crop tractor class. It used the Power Director transmission and live PTO, so the operator could shift between ranges with a hand lever while keeping PTO-driven equipment running.

The D17 was built through 1967 in Series I, Series II, Series III, and Series IV versions. Gasoline, LP-gas, and diesel engines were offered during the production run, and the serial number table shows where each series begins.

Serial Number Reference

Serial number locations: The tractor serial number is stamped on the left-front end of the torque housing. The gasoline engine serial number is on the rear left-hand side of the engine block behind the carburetor; diesel engine numbers are on the top left-hand side of the engine block.

The table below shows the beginning tractor serial number for each Model D17 year and series:

 

1957-1960
Model D17 year Beginning serial number
1957 - Series I 1,001
1958 - Series I 4,300
1959 - Series I 16,500
1960 - Series I 28,200
1960 - Series II 32,001
1961-1964
Model D17 year Beginning serial number
1961 - Series II 33,100
1962 - Series II 38,070
1962 - Series III 42,001
1963 - Series III 65,001
1964 - Series III 70,611
1964-1967
Model D17 year Beginning serial number
1964 - Series IV 75,001
1965 - Series IV 77,090
1966 - Series IV 80,533
1967 - Series IV 86,061

Total production: 84,914 Model D17 tractors (51,598 gas and 12,284 diesel; LP-gas production is unknown).

Allis-Chalmers D17 Paint Reference

For restoration planning, the Allis-Chalmers D17 is listed in the Allis-Chalmers tractor paint guide with the original paint references below.

Allis-Chalmers D17 paint reference by production period
Production period Metal Wheels Disc Chassis Trim
1929 through 1960 Persian Orange 1 Persian Orange 1 Persian Orange 1, Aluminum Persian Orange 1 Persian Orange 1, Aluminum grille
1961 through 1977 Persian Orange 2 Cream, Persian Orange 2 Cream, Aluminum Persian Orange 2 Cream grille

Paint placement can vary by production year, series, and equipment configuration.

Sort By:

Display Type:
Filters
  • Allis-Chalmers 7/8 inch Snap-In Hole Plug, Nickel Plated, 9563K46, image showing front and back views of the nickel-plated metal hole plug with a serrated interior for secure fit.

    Allis-Chalmers 7/8" Snap-In Hole Plug, Nickel Plated - 9563K46

    Allis-Chalmers
    $1.50
    9563K46
    OverviewNickel plated 7/8" snap-in hole plug for Allis-Chalmers D Series tractors and cigarette lighter openings. Part Number: 9563K46.FitsAllis-Chalmers D Series tractorsCigarette lighter...
  • Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47, two metallic gold-colored hole plugs with a smooth and textured surface, one with a snap-in design and the other plain.

    Allis-Chalmers D Series 1" Snap-In Hole Plug 9563K47

    Allis-Chalmers
    $1.50
    9563K47
    Nickel-plated 1" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for key ignition switch use.Part Number: 9563K47FitsAllis-Chalmers D Series TractorsSpecsSize: 1 inchNotesKey ignition...
  • Allis-Chalmers 11/16 inch Snap-In Hole Plug Nickel Plated Allis Chalmers D Series, product image showing the plug's internal and external views.

    11/16" Snap-In Hole Plug Nickel Plated Allis Chalmers D Series

    Allis-Chalmers
    $1.25
    9563K61
    11/16 inch snap-in hole plug for Allis Chalmers D Series tractors. Nickel plated and described for push button start, fuse holder, and dash light use.Part Number: 9563K61FitsAllis Chalmers D Series...
  • Allis-Chalmers D Series 7/16 inch Snap-In Hole Plug 9563K84, metal hole plug with snap-in design for machinery maintenance and repair.

    Allis-Chalmers D Series 7/16" Snap-In Hole Plug 9563K84

    Allis-Chalmers
    $1.00
    9563K84
    Nickel-plated 7/16" snap-in hole plug for Allis-Chalmers D Series tractors.Noted for headlight switch use.Part Number: 9563K84FitsAllis-Chalmers D Series TractorsSpecsSize: 7/16 inchNotesHeadlight...
  • Allis-Chalmers 1/2 inch Snap-In Hole Plug, Nickel Plated, with one view showing the plug's interior and the other showing the smooth exterior surface.

    Allis-Chalmers 1/2" Snap-In Hole Plug, Nickel Plated

    Allis-Chalmers
    $1.00
    9563K43
    Part Number: 9563K43Product Overview1/2 inch snap-in hole plug with a nickel plated finish for Allis-Chalmers D Series tractors. Intended for belt pulley rod or knob holes.FitsAllis-Chalmers D Series...
  • Close-up of a gray cast-metal water pump for an Allis-Chalmers D17 Series III Diesel or D19 Gas, LP, or Diesel farm tractor. It has a circular silver pulley flange with eight threaded holes, a central shaft opening, mounting ears, and a large coolant outlet.

    Water Pump for Allis-Chalmers D17 Series III Diesel, D19 Gas/LP/Diesel

    Allis-Chalmers
    $190.00
    74517362
    New water pump for select Allis-Chalmers tractors. Water pump to block gasket is included.Part Number: 74517362FitsAllis Chalmers - D17 Series III Diesel, D19 (Gas, LP, Diesel)Replaces / Cross...
  • Allis-Chalmers tractor brake band with hardware, shown on a white background: a curved black band with gray friction lining and brass-colored rivets, accompanied by a pin and two flat linkage plates. Fits D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 190XT III, and 200 tractors.

    Brake Band with Hardware for Allis-Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 190XT III, 200

    Allis-Chalmers
    $37.75
    70277379
    Brake band with hardware for select Allis-Chalmers tractors. Sold individually and includes the hardware kit.Part Number: 70277379FitsAllis Chalmers - D17 (SN 42001 and up), D19, D21, 170, 175, 180,...
  • Circular clutch seal for Allis-Chalmers farm tractors, with a brown outer ring and black inner sealing lip, shown against a white background.

    Allis Chalmers D17 D19 170 175 180 185 190 190XT 200 Clutch Seal

    Allis-Chalmers
    $21.65
    70235253
    Clutch shaft seal for Allis Chalmers tractors listed below.Use this part for the models shown in the fits section.Part Number: 70235253FitsAllis Chalmers D17Allis Chalmers D19Allis Chalmers 170Allis...
  • Four shiny metal slotted screws with rounded heads and threaded shafts, arranged in two rows on a white background. Product is an Allis-Chalmers farm tractor fuel gauge screw set.

    Allis Chalmers Fuel Gauge Screw Set

    Allis-Chalmers
    $13.00
    70918548
    Part Number: 70918548Allis Chalmers Fuel Gauge Screw SetFuel gauge screw set for select Allis Chalmers tractors. This set includes 4 screws and replaces 70918548.FitsAllis Chalmers D10Allis Chalmers...
  • Close-up of a metal 180-degree thermostat for an Allis-Chalmers farm tractor, with a wide circular flange, central brass-colored valve, and coiled spring.

    180 Degree Thermostat - Allis-Chalmers

    Allis-Chalmers
    $11.75
    74025103
    180 Degree Thermostat for select Allis Chalmers tractors and equipment.Part Number: 74025103FitsAllis Chalmers D17Allis Chalmers D19Allis Chalmers D21Allis Chalmers 180Allis Chalmers 185Allis...
  • Silver patterned instrument panel trim plate for Allis-Chalmers D15, D17, and D19 farm tractors, with multiple round gauge and control openings.

    Allis-Chalmers D15 D17 D19 Instrument Panel Trim

    Allis-Chalmers
    $78.75
    AC-353D
    Stainless steel instrument panel trim with a 1/2" swirl, machine turned design.Part Number: AC-353DFitsAllis Chalmers D19Allis Chalmers D17 (SN: 32001 - 75000)Allis Chalmers D15 (SN: 9001 &...
  • A small clear incandescent bulb with a brass-colored bayonet base, shown horizontally on a white background. Allis-Chalmers Power Director light bulb for farm tractors.

    Allis-Chalmers Power Director Light Bulb

    Allis-Chalmers
    $3.00
    9527T602
    Bulb for the Power Director Light Assembly on select Allis-Chalmers tractors.Part Number: 9527T602FitsAllis Chalmers D14Allis Chalmers D15Allis Chalmers D17Allis Chalmers D19Allis Chalmers D21Allis...
  • A glossy red, dome-shaped ribbed light lens with a ridged circular base, shown against a white background. It is an Allis-Chalmers Power Director tractor light lens.

    Allis-Chalmers Power Director Light Lens - Red Lens

    Allis-Chalmers
    $13.75
    70240838-R
    Red Power Director light lens for select Allis-Chalmers tractors.Part Number: 70240838-RFitsAllis Chalmers D17Allis Chalmers D19Allis Chalmers D21Allis Chalmers 170Allis Chalmers 175Allis Chalmers...
  • Allis-Chalmers farm tractor cigarette lighter, featuring a black knob with a cigarette symbol, a gold-toned metal body, and a red wire.

    Black Cigarette Lighter with Cigarette on Knob JD-974BD

    Allis-Chalmers
    $19.75
    JD-974BD
    Black cigarette lighter with a cigarette design on the knob. Listed under part number JD-974BD.Part Number: JD-974BDSpecsBlack cigarette lighterCigarette design on knobNotesCompare knob style before...
  • A complete carburetor rebuild kit for Allis-Chalmers WD45 and D17 farm tractors, arranged on a white background. The kit includes large dark gaskets, brass and metal carburetor components, a float assembly, springs, screws, washers, seals, and small fittings.

    Allis-Chalmers WD45, D17 Complete Carburetor Kit

    Allis-Chalmers
    $47.25
    ACR2112
    Complete carburetor kit for Allis-Chalmers WD45 and D17 tractors with Marvel Schebler carburetor numbers TSX464 and TSX773.Part Number: ACR2112FitsAllis Chalmers WD45Allis Chalmers D17NotesComplete...
  • Allis-Chalmers Ammeter 60-0-60 AMP Gauge 2 inch Diameter, analog display of electrical current measurement with black dial and red needle.

    Ammeter 60-0-60 AMP Gauge 2" Dia

    Allis-Chalmers
    $23.00
    AMG60
    Universal 60-0-60 AMP ammeter gauge with a 2" dia. hole fitment. Condition: New.Part Number: AMG60FitsAllis Chalmers - 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 2RCP, 4650, 4660, 4W-220,...
  • Round brown-and-black speckled rubberized cork fuel cap gasket for Allis-Chalmers farm tractors, shown against a white background.

    Rubberized Cork Fuel Cap Gasket for Allis-Chalmers and More

    Allis-Chalmers
    $2.75
    IH-2642D
    Rubberized cork fuel cap gasket for the listed applications. Condition: New.Part Number: IH-2642DFitsAllis Chalmers - A, B (To Sn: 101, using buy clean fuel cap), D17 (EARLY, using buy clean fuel...
  • Allis-Chalmers Top Vented Fuel Cap With Gasket, metallic fuel cap with embossed branding and gasket edge for secure fitting.

    Top Vented Fuel Cap With Gasket

    Allis-Chalmers
    $12.75
    AB-1880D
    Top vented fuel cap with gasket and splash guard for listed tractors and equipment.Part Number: AB-1880DFitsAllis Chalmers - AAllis Chalmers - B (Up to Sn: 101)Allis Chalmers - D17 (EARLY, using buy...